Just getting I to PRS and having issues with target acquisition. Have had some serious eye issues in the last year which does not help. Couple of guys suggested me getting Swaro 15x56. I currently have vortex fury 10x42 and they suggested getting a dual tripod mount and use the fury for initial glassing and then the Swaros to hone in and find landmarks, etc.

Would I be able to use the Swaros for a spotting scope? Would like to mount my phone & record the bullet trace and impact. Would they work for this?

These were fun projects with my kids when they were younger. Each of them got to pick out a few parts and we built them together.

Pink gun is a stock ruger action, trigger, bolt in a hogue stock with purple tactical solutions aluminum sleeved barrel with threaded muzzle and tactical solutions pic rail.

Asking $450 dropped to $375 shipped with 2 bx25 mags and 1 10 round.

Red gun is stock ruger action, bolt, trigger in a krg bravo, summit precision carbon fiber barrel, tactical solutions pic rail. And a pile of LOP spacers and screws. This is my last bravo so will include all the extra spacers I have around the house. SOLD SOLD SOLD

Asking $650 dropped to $600 shipped with 2 bx25 mags and 1 10 round

No idea on accuracy of either rifle since we just had red dots mounted for plinking. Both were a bit finicky with cheap ammo but ran well on cci.

BX trigger sold

*MAGS WILL ONLY SHIP WHERE LEGAL*

I have a 6 ARC complete upper receiver. Upper is unfired and all parts are new except the Geissele charging handle and Battle Arms Carrier. The 6ARC bolt came from Craddock and is unfired. The charging handle and Battle Arms carrier have around 100 rounds on them from a different firearm that they were previously in. I own 4 Craddock RTR barrels and everyone of them shoot amazingly accurate.
$975 Shipped
No Trades Please

• Aero Precision FDE upper receiver (New)
• Battle Arms Development Enhanced Bolt Carrier (Lightly used)
• Craddock Precision RTR 18" 6ARC barrel with head spaced bolt (New) - Barrel has been painted FDE - 1/7 Twist / Rifle gas length
• Superlative Arms Tan DLC .750 adjustable gas block (New)
• Geissele Airborne charging handle (Lightly used)
• Geissele MK18 DDC M-Lok / Arca-Swiss rail (New)

Black nitride 5/8x24 30 cal. $old

Bacically new. Played with it at the house and decided I’m too lazy to actually move it between my different rifles so it has just sat in the drawer.

$150 shipped CONUS.

Might have used this a couple times. Looks new. Asking $60 shipped CONUS

Selling off all my spare / new P320 parts. Everything listed is worth well over $200 . Just selling cheap to move fast.
Here’s what’s included
$70 shipped
Thanks for looking
Cross Listed

This is a Brand new
The Sig Armorer Competition Trigger Kit
This isn’t an Armory Craft,Mcarbo, or a Grayguns. This trigger is literally on another level. Feels more like a tuned 1911 trigger.
This is your chance to get one for less than half price. You’ll never find one this cheap .
Kit is brand new and complete
$170 shipped
For $200 shipped I’ll sell the Trigger kit with everything pictured. The parts in the pic alone are worth over $200. Incredible Deal
Thanks for looking
Cross Listed

Too many lying around. Buy it before it turns into a rifle.

Exc condition lrh with mini chassis for m5 Bottom metal.

Used in excellent shape. Has biood stud, qd sockets. Some fretting around the biood stud from Harris.

Neoprene pad in cheek piece will come right off.

1075 SHIPPED.

Cleaning out some bags that I don’t use. All prices are shipped CONUS. The str8t laced is the only bag that’s been used, other 3 are brand new and have just been collecting dust in the gun room.

Left to right

Precision underground F1 I believe? Dimensions are 7.5” x 6” x 2”
$70 dropped to $55

Precision underground EL-RX I believe?
Dimensions are 6.5” x 5.5” x 2”
$70 dropped $55

Original Str8t laced light weight bag.
$50 dropped $40

Sold Wiebad Max fortune cookie heavy fill.
$85 dropped $75 sold

Up for sale is my vortex ridgeview carbon tripod with arca mount. Super light weight and is rated for 22lbs. Perfect for hunting rigs. Looking to trade for a cheap amazon tripod that takes ball head mounts. $275

2- stands
2- toolheads

SOLD SOLD SOLD

Looking for advice on the best titanium suppressor to run on my bolt gun and Semis. Went to a shop and handled a Sandman X which is very heavy feeling and also a Huxwrx Flow 762 TI. Saw a test online where the groups opened up on 308 semi with the Flow. Curious about BT Titanium can which is flow thru and free tax stamp.

Want a lightish can to hunt with and shoot groups. Will never burn it down with full auto or belt feds. Hardest for seen use will be some bill drills. None of my semis have adjustable gas blocks

do Flow Thrus make good all around cans or should I just get a “hunting” can?

Looking for 100 277sig fury hybrid brass cases. Please lmk if you have some available. Thank you

I have an N-Vision Halo XRF thermal scope. It comes with a hard case, 3 sets of batteries, charger & USB cable.
Asking $5500 shipped - No Trades please

Anyone have an idea what bullet this is? They’re 180gr 1.42x” long and have a black ballistic tip. Can’t seem to match up a manufacturer using google and similar bullets don’t have a cannelure. Any help is appreciated!

For sale, Insight arms .264 cal Heathen $125 shipped.

Little Crow 6.5x47 trimmer $50 shipped.

Excellent condition Gray Ops CNC Precision Scope Mount in 34mm, 1.26” height, 0 MOA w/ Precision Diving Board. Was mounted once and went to the range 2-3 times. The precision diving board replaces the front cap and is all one piece.

You’ll notice there are actually 3 regular ring caps, this is because one of the accessory mounting holes at 12 o’clock was stripped so Matt & Dave promptly sent me a replacement. All the components are serialized, so due to this, the serial # on one of the caps doesn’t match. I really don’t think this matters because of how precisely these are manufactured, plus the precision diving board is included.

$380 shipped CONUS, Zelle or PayPal. No trades. Please PM with any questions or if you’d like to talk/text/FaceTime. Thanks!

Specs:

• 34mm tube diameter
• 1.26” / 32mm height
• 0 MOA cant
• Weighs 10oz w/ precision diving board
• Precision diving board picatinny rail is 3.8” long
• 4.85” total length (rail space)
• Each ring is 1.145” wide
• Space between rings is 2.55”
• All fasteners are T25 Torx (the T25 bit they include normally is not included)

This might sound crazy but my gut feeling is that something crazy is going on.

Okay, so my wife gave birth to our daughter in 2022. It was her last appointment 2 weeks before the due date and her doc said that our baby girl’s not gonna grow in the womb anymore so they’re gonna induce the labor. It took 35 hours to get the dilation to 10cm and then my girl was out in 20 minutes. I thank God for that event not turning into a c-section.

Anyways, since then, five friends of ours had kids and every single one of them was either induced or c-section. And I keep hearing about the same thing happening to friends of friends. So, what in the fuck is going on? Out of those five friends, one’s in California and one’s in Texas, so it’s not just Illinois. My theory is either hospitals and insurance companies scamming or something more sinister.

I don’t know if this has happened to people you know or anyone here experienced this and thinks that something’s up. Just wondering.

March FX Shorty Gen II 1-10x24 with DFP (Dual Focal Plane) DR-TR1F reticle. Model is D10SV24FDIMLX. Locking Shuriken turrets, adjustable parallax, lightweight (19 oz)! Uses a standard 34mm mount. Includes the box, lens caps, sunshade, paperwork, etc. $2000 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

WTS a BNIB Huxwrx Flash Hider 7.62 (5/8x24), never mounted. $115 shipped. Zelle is preferred.

Getting out of predator hunting. Headlamp and rifle light. Have 4 batteries, ( 2 batteries are in the 2 lights) have home and car chargers.

Night eyes GL350 and HL08 are the models.

Asking $100 shipped CONUS. Also selling a foxpro shockwave electric call we could work a package deal on.

Open to trade ideas.

Will the 20 MOA 1.375” Uni-Mount with a 2.5-20x50 NX8 clear the rail of an AR?

I’m actually running a JP handguard without a rail on top on this rifle so I assume it would but you never know.

If I move it to a rifle with a full rail will it still fit.

Would the 1.125” fit this rifle? I assume the 1.125” will not clear a traditional handguard and rail?

Pay no attention to the cheap Brownells Mount. It was free. Just acting as a stand in

Dillion 550C loaded 50 rounds on it
Pics will follow soon
$500 - plus shipping from NC minus scales
MBMS3 bracket not included

Moved to the big city and no longer have access to areas to chase coyotes.

Factory sounds, has lithium battery pack, and electric decoy. It has seen plenty of field time so it’s got scuffs and scratches but all works as it should.

Asking $375 dropped to $350 shipped CONUS. Also have night hunting lights we could work a package deal on.

Open to trades, could use a pistol light tlr1hl or streamlight maybe, 9mm pistols, holosun 507c or 507 comp, who knows what else????