For Sale Mk 4 3.5-10 in excellent condition. M1 MOA turrets with mil dot reticle, side parallax. Asking $800 OBO shipped to lower 48 with the LaRue mount.

Just let me know if you want anymore pictures.

SOLD
For sale great condition
Remington 03A3
Thanks for looking
Cross listed

Zelle (preferred) - Venmo - PP FF accepted - I ship same or next day in most cases.

$5 shipping via USPS for totals under $25

Free shipping $25+

2. Inline Fabrication Quick change top plate #66 for Dillon Super Swage 600 - includes quick change wing nuts, and 3 screws I bought from Home Depot that perfectly mount the Dillon SS to the quick change plate - $25

3. RCBS Universal Hand Priming Tool - includes original box and all parts - $50

10. RCBS shellholder #10 - $5

11. RCBS Bullet Puller Collet - 22 cal - $5

12. Hornady Modified Cases for Hornady OAL guage - 223 Remington - $5

Selling a like new condition Proof MTR Elevation in 7mm Rem Mag. I used this rifle for a deer hunt last year, sized up to a larger caliber for an elk hunt this year. Has 25 rounds of factory Hornaday 162gr ELD-X through it.

All stock with the addition of a small pic rail for bipod mounting (bipod not included), can install the dual sling studs if you prefer.

Zermatt action and factory TriggerTech trigger

24" Elevation contour barrel with 1:8.4 twist

5/8-24 threaded muzzle, thread protector included

5 round Pmag magazine


$2450 shipped FFL to FFL, or local sale in Charlotte, NC area
Cross posted on a couple other sites

Open to trades, especially looking for:
Sako TRG
6 Dasher w/ Foundation stock (PRS setup)
Leupold PR2 Mil optics

Some background for context: In a previous life I was very much into weightlifting, power lifting and the science/programming angle. I recall an interview/podcast with a former member of the Bulgarian Olympic Weightlifting team, Max Aita, where he discussed their training methods and said that because they spent so much time training their lifts at their one-rep max, that on any given day he could walk into a gym and front squat 440# at a moments notice. No warmup, no preparation, just load the bar and go. Which is absolutely super-human strength, like unfathomable strength, and mental strength.

This led me to consider a parallel to precision rifle shooting: On ANY day, with your current skill level and your current equipment, with no preparation, what is the furthest distance you can confidently first-shot impact a 1 MOA target? 1/2 MOA? No warm, no practice, no dry-fire: setup your rifle system and send a single shot. What equipment are you using?

What distances would you consider to be bad, average, good, great, world-class in terms of precision rifle shooting capabilities?

LEFT HAND Origin MA has only 3 matches on it
- factory box with everything from the factory plus the hunts lug so you can run TL3 barrels if you so choose
- $750 shipped obo

Chassis is the XLR 4.0 Mg Medium in OD Green with 3 matches on it
- fully ambidextrous
- factory box with everything including vertical grip and action screws- no buttstock
-$450 shipped obo

2 MDT Medium 8rd for the PRC, SAUM size cartridges - 3 matches on them
-$125 shipped obo

$1275 shipped obo if it's all going to the same address.

Trade interests +/- cash are;
22arc upper or barrel bolt combo
22cm TL3 barrel
berger 135 lrht 500 count
4831sc unopened 8lb or same lot 1lbs
H1000 unopened 8lb or same lot 1lbs
Whatever just ask


No issues at all with any of this, im just going back to short action for competition. Everything looks close to new. I have bought and sold on here quite a bit, though it's been a while. I don't remember a negative transaction either way. Venmo, Check, Postal MO, or Cash for payment. I'll ship ASAP once funds have cleared.
Also posted on rokslide
PM for pics

got it

Selling my near clone SAM-R service rifle.

The SAM-R rifles are some of the rarest of the US issued rifles during the GWOT era. Only something like 300 were ever fielded and they were used by US Marine infantry marksmen in Iraq and Afghanistan. Many of the parts on this rifle are 100% clone correct, or are very close which act as good place holders. The barrel only has 80rds down it, and it shoots sub ¾" 100yd groups with BH ammo. This rifle will make an excellent shooter or uncommon collector project for whoever purchases.

The last picture is a first generation SAM-R being shown to a group of Marines. The first ~50 SAM-R's produced had two piece gas block front sights before they moved to the KAC FSGB combo.

Parts are as follows,
Lower: As-new unused FN M16 Military Collector series complete lower
Upper: Colt C marked early 2000's T-marked M4 feedramps
BCG: Almost mint early 2000's Colt C marked and MPC marked
Barrel: 20" Compass Lake Engineering SAM-R profile Bartlein 1/7t 5.56 (CLE did the SAM-R barrels for the US Gov, but with Kreiger barrels)
Gas Block: Yankee Hill Machine railed GB (not clone correct, but acting as a visually similar place holder until a SAM-R GB pops up)
Handguard: Knights Armament RAS Long FF PN:21318
Muzzle Device: Surefire limited A2-style Flash Hider
BUIS: Knights Armament USMC marked micro rear and NSN marked shrouded front (both military surplus)
Magazine: I will include a surplus Colt 20rd 5.56 magazine with old school metal follower

Does not include pelican case in picture.

Willing to sell the entire rifle as is for $1800 or just the complete upper for $1300 shipped.
I will consider parting out if you want enough of it. PM me.

Brand new 30 cal brake. $150 shipped

DIY Gap Camo in excellent condition. Stock only with cheek pad. Bottom metal, arca rail and action not included.
$550 shipped

I'm selling two (2) boxes of Lapua 6.5 PRC Brass. I'm asking $150/box, or $290 for both boxes shipped.

New Chest Rig with the foundation wings. Not used and son didnt have use for it. 115$ shipped. View attachment IMG_3568.jpegView attachment IMG_3567.jpeg

What is this "orb"? We watched yet another launch this morning and shortly after take off and the rocket leaves into the atmosphere, I'll post the rocket video later, I see this "orb" just hanging in the sky. You can see it at 10 seconds in. I've seen this "orb" before while leaving for work around 4ish am on many non launch morning. It's always in the same location and It's too bright to be a star and it doesn't move. It's not an airplane as, again, it does not move and is much too bright.

Login to view embedded media

SOLD PENDING FUNDS

Hi guys,

Have a great condition ATPIAL-C for sale today. That's the civilian powered version of the PEQ-15.

Date code: 2015.

Has seen some moderate use during night shoots, but has never been abused and was always stored with the batteries out when not in use. Has some usage marks here and there but nothing serious and everything works as it should.

Does not come with the pouch, or manual.

What you see is what you get.

Price is $900 shipped via USPS Priority Mail, signature required.

If you think I’m smoking crack on the price, feel free to make a reasonable offer but I feel like this is priced pretty decently.

I accept Paypal F&F, Venmo F&F or Zelle with no mention of firearms / firearms parts whatsoever.

Not looking for any trades at the moment.

Please DM with any questions.

Thanks

Selling a lightly used Nightforce NX8 2.5-20x50 Mil-C, F1
W/ box and accessories. $1400 shipped tyd. Leave me a DM if you want it.

Asking for $300.

View attachment IMG_4121.jpeg

Does anyone have experience with 8.6 blackout?

What are the typical muzzle velocities from a 12.5 inch barrel for sub sonic and super sonic?

What is the velocity difference between a gas gun and a bolt action?

Do you have a drop and velocity chart? What about wind deflection?

For sale $1925 for barreled action (no trigger)
$2075 with trigger tech diamond
$2875 with MDT ACC

Comes with 2 weights in MDT chassis
2 10 round vudoo magazines
20 moa rail
20” MTU contour
Right Hand action
1/2x28 threaded barrel, thread protector

Arteryx Knee Pads.

$60 TYD in the lower 48.

Used once Ferox Data Armboard.

$45 TYD in the lower 48.

Hit the range today to dial in a couple things for an upcoming pig trip.

Brought "the one" just to verify zero of my 20" Grendel, a Noveske build, all their parts, barrel, etc other than a Smoke Composite stock and grip. Topped with a Leupold VX-6 HD 3-18X, 50mm, and a Thunderbeast Ultra 7.

I usually shoot Hornady 123 SST, which routinely shoots sub MOA out of that gun. Today I grabbed some Underwood 110 gr as its just sitting on a shelf. They stopped making it in Grendel so I went into a conservation mindset, but realized - might as well burn through it over the next couple seasons.

1) POA/POI vs the SST - nearly identical at 100 yards.

2) I realized I'd grabbed a 4 rd mag - I usually shoot 5 - but at $3/rd, I'm doing a $12 experiment, let's see how much adjustment we need... results were enough to make me take a break and reflect on how much I wanted to do that again.

To be fair, my next group was at least... .5 - .6 MOA as I was chasing this dragon, but I think it is safe to say this was a personal best. I know it isn't a 10 round phenom, but I'll take it... with a little luck this is an unbeatable combo in the small frame.

Naturally, Noveske stopped making the Grendel barrels and Underwood no longer makes the ammo - but, as the saying goes - I got mine

Trade only. I’ll swap my manners tcs salt water camo with mini chassis, weighted area 419 rail and Sikes clutch rail for mpa chassis. Vanquish preferred. Weight kit is a plus, happy to add cash for the right deal.

Here we go again…

Any bets on Troon, Furry, mentally ill!

Went after a Country Club.

Developing….

Sirhr

Very lightly used TT diamond. Would like to trade for a Bix Tacsport pro 2 stage. Would possibly just let it go shipped for 250. Don't think I still have the box around though.

@45-90
Hope you don't mind me tagging you into this thread since I read where you made Dasher brass from the parent 277 Hybrid brass.

I ordered just 100 to play around with to see if I can reasonably make brass for supersonic use only.

I've done case forming before with 17 Ackley Hornet, 17 Mach IV, 22 BR, 30 Herrett, 309 JDJ and a few others.

With the exception of the 30 Herrett, the other brass was realistically a simple neck, fire-form and go.

What I'd like to figure out is the dies and steps necessary to get the Fury case shortened and formed to the 30-BR.



Is there an easy way to just roll the shoulder down and cut the brass to the proper length?

Is it more like using the old multi- step forming die?

I noticed you have removable shoulder/neck buttons for some of your forming dies.

Is that the direction I need to go?


I'm on a retiree budget, so expensive forming dies are out of the question.

The only lathe I have access to is the little 7x13 Grizzly in my garage. Not really the right tool for creating dies and whatnot.


My purpose for even thinking about this is to see if I can get close to 110 and 125gr 308 performance in the little 1.5" case.
I believe i can get close, but only experimentation will get the answer to me.

The other use for the rifle will be standard Lapua brass and a 240-250gr bullet for subsonic use.
I'd be shooting it to 500 yds to replicate practice to a mile+.

I know, I'd be duplicating the subsonic 300 BO with a larger case capacity and might run into issues with it.

What are your thoughts?

Are the cases fairly easy to form without spending a ton on dies?