Now this could all be user error, but I've maxed out the upward travel while trying to site in a new Mark 4HD. Nightforce rings, didn't work on a Tikka Tac A1 (intended rifle) so I tossed it on my AI as well and its no better. WTF did I do incorrectly? Took the caps off and still couldn't get any more travel.

Aimpoint Comp M2 in a Larue M68 mount. Has been my spare for a long time and in perfect functioning condition minor scar here there put in very good shape aside from being a little dusty. All rubber goods in tact.

325 shipped

Well well well comrades. MAGA and DOGE is really the cultural revolution.

THis is why history and that learnin is so important! Destroying Government is the same as Forced Nationalization of all Industry!

I know I taunt everyone for not reading and being in the echo chamber around here, but as a full Dunning Krueger expert this is in fact the EXACT OPPOSITE of what almost all former chicom/N Korea people say. In fact it was all this DEI shit that was straight up cultural revolution/Red Guard. and that little performance the other night but the Democrats and their bowing to BLM/DEI/Trannies and forcing all of us to kowtow to their beliefs that every dissident I've read has said reminds them of Mao's Cultural Revolution.

I even put a post about it in the secret squirrel section a few years ago. Man I really hate these people lately.

Sorry I just really hate communists (I'm old)
Not sorry.

Taipai is the capital of One China.

Hi everyone. I have a turnkey, gorgeous Spotter 45 setup up for sale. This is a complete package, I'm not wanting to disassemble it. It was purchased new, by me, from EO (who also handles any service requests for them) and has only been used a handful of times. Otherwise it's just sat dormant in my smoke-free house on a shelf. I just am not putting it to use so it's ready for it's next owner who will be really able to use it to its full potential. I don't think there's much I need to say about these, they're the best of the best when it comes to tactical spotters and I believe they're discontinued for distribution in the U.S. so they can be tricky to get your hands on one stateside.

Package includes:

• Hensoldt Spotter 45 / Tan / Horus 32 - $4330 + tax retail (have receipt)
• Triad Tactical Spotter 45 cover in Multicam - $84
• Badger Ordnance S.L.I.C.K.-H - $1300
• Badger Ordnance S.L.I.C.K.-H "Catseye" cover - $185
• Badger Ordnance S.L.I.C.K. Adapter Plate (RMR) - $50
• Trijicon RMR HRS - $550

Total Retail before tax and shipping: $6499

Asking $6k + shipping.

Barretn account has been hacked and is scamming people using this account and feedback. Beware!

Little bastard Gen 2 22 cal. Front hole measures .2700 in black 5/8x24. Basically brand new condition. 40 rounds tops through it of Valkyrie. Can take pics if you need it. $140 shipped

Have a 6.5 hellfire match in black. Excellent condition. Also have a 9/16x24 adapter if you prefer it over the 5/8, your pick. Can take pictures if you need it. $155 shipped

All prices include shipping. Payment via Venmo, Paypal (FF preferred or cover fees to use G&S)

MDT Baker wings (mounted, used a few times) - $150 - Sold

Second set of baker wings, not pictured (used for approx 1yr, still in great shape) - $125 Sold

Vudoo Polymer magazines with JKL extensions - $45 each Both Sold

ADM Recon 34mm 1.70 height 0moa cantilever mount (mocked up with a scope) - $200

Ive recently been going down a rabbit hole in reference to the best MPVO for my work gun. I have made comments to some that actually surprised me with how much Im really liking my Vortex Strike Eagle 3-18. I now have 2 of them. I just recently started comparing it to my NF ATACR 4-16 F1 T3 and i am disapointed in what im seeing. I have included photos to compare.

Ive noticed that my ATACR seems to have what appears to be a haze. I took both of these scopes an set them side by side. I then set both to matching power settings of both 4x, and then 10x to compare and take photos. The haze looks much worse to my eye, but can be seen in the photos as well, its just not as apparent. Both optics were zoomed into their max mag, side focus set, and then dialed back to the 4x before photos were taken. Same with 10x.




First photo in each(1,3,5) comparison is the SE, Second photo in each(2,4,6) is the NF ATACR F1


Are the new SE 3-18 really this good, or have I gotten use to a NF that is cloudy/ hazy?

Has anyone else experienced this, or should i contact NF and see about sending it back? This thing tracks incredibly well as it should, but optically i have to say that i am a little disapointed as i compare it to other options.

This unit is very lightly used and still looks and functions great, but these days it sits unused in the safe.

The unit will come with the original hard case and instructions, wireless remote, IR illuminator, 2 battery compartments, lens caps, and a mounting ring and spacers to attach the device to most scopes with a 50mm objective lens. There's also a very short cable intended to connect the unit to an external power supply.

This is would be a great way for someone to get into the clip-on NV without spending a ton of cash.




Looking to get $650 shipped.

If you'd like to add the ability to mount the unit to a 56mm Objective, pulsar is still selling adapters compatible with this device:

Does anyone know the body and thread size on the PrimeWhere digital gauge?

Lead farmers account has been hacked and is scamming people using his account and feedback!

Got had by Bluewave, Lonnie Arp, [email protected]

This is on me, he had no feedback, but had a few posts on here, Talked with through text and on here, got pictures with requested things written on paper with two diff. pens.

Beware..... Guy Ghosted me and won't return any messages on here or text......

Hey guys,

I'm installing a badger scope base on an R700 (Bergara) action. The instructions call for red loctite to be used, which I assumed was for the fasteners. But it says to coat the "bottom of the base" with loctite to "prevent water from wicking" between the surfaces. I'm just curious about this, I can't find videos of anyone installing these and I thought they just screwed on. Red is also the semi-permanent one and was wondering if any of y'all used blue instead, or whether people really do this.

And exactly what is considered "a light coat". Should I spread it around with my finger evenly or just dab a few drops on there?

(PS. I don't know where the "Gunsmithing" thread went, so I posted here.)

Holy shit...they are looking at how owls are cornholing each other in Maine?



I mean, I expect this gay shit in Connecticut or Rhode Island. And lots of them moved to Vermont to turn the woodchucks gay.

But, Stuart... do you really understand what the queers are doing to the soil???

(shout out to my fellow Dead Milkmen fans).

Sirhr

PS. Everyone who attends this is mentally ill.

Payment via cash, Venmo, Zelle, or BTC works. No Paypal at this time. Must pick up from me in San Diego.

2 x Hodgdon H4831 sealed 8# jugs are available. Same lot.

Price is $350 each, or $600 total if you take them both.

Hey, it's not much. It's not huge.

But it's a start!


These pieces of shit stood in the way of deportations and federal agents. They are getting prosecuted.

Now, please, just 30,000 - 200,000 more?

Message sent...

Sirhr

TriggerTech Diamond for rem700/clones with flat shoe, like new condition comes as seen.

$225 shipped
PayPal F&F, Venmo F&F, Zelle

Used at one match, switched back to the original centurion because it was to heavy. Not a scratch on it. Samson Brass 737R Right hand Centurion grip
$1650 Shipped

This might be a niche topic, but any Remington RACS chassis owners that have a RRS BRACS ARCA plate? I placed a custom order to have a run of the BRACS plates made, and they do not fit properly on my short action RACS with a full length fore end tube, nor with a spare XM2010 fore end I also have (both fore ends are the same).

It looks like the curve of the mounting screw points on the RRS BRACS is sharper than the curve on the full length fore end tube. Sliding the BRACS all the way back pushes it down a bit, causing the mounting screw holes to go out of alignment. So I can only push the BRACS so far back before the screws start binding due to the misalignment. Please see the below pics for what is happening.

I just wanted to share a positive experience about Steelwater Gun Safes. I’ve had one for several years. It has very nice LED lighting, one bar on the side panel on each side, and they come on when you open the door. Recently, they stopped working properly, blinking weakly. I went on their website and submitted a customer service request stating my issue. I kid you not, like 5 minutes later I get an email from Keith apologizing for the problem and describing how to troubleshoot, and asking for my mailing address. I followed the steps, which were simple, and reported back. Next thing I know he responded letting me know the part(s) are on the way along with instructions to install. I’m very pleased.

I have 3 sets of gray ops hybrid mlok weights sold per set of 2.

So I am a brand new AI owner. Just recently purchased a AT-XC and am waiting on the arrival of it to Mile High. Every rifle I own has a flat trigger shoe, and was hoping to swap the original curved AI show for the flat shoe. I was informed that the XC is leaving dealers with the comp trigger, is this true? Also will there be any issue with putting this shoe on the trigger if its not a comp model?
Just a reminder I am new to the AI world, and currently picking up barrels as I go.

Have they released any new products in the last, like, 3-4 years? I remember tons of teasers about a clip-on system. Seems like they haven’t made a peep in forever.