i have some experience in this area and the following is def food for thought.

I’ve got 70 Nosler 190 ABLRs for sale. They didn’t group well out of my rifle, so passing them on. Great hunting bullets. $60 TYD

Lightly used MDT mags with spacer for BR variants. (2) 10 rd mags. 12 rdr is sold. $120 shipped for the 10 rd mags.

Remage 26" 7.7 twist 1" straight 6bra .160 freebore 5/8x24 threads Shot maybe 50 rounds and sat in safe. From Theurbanriflemanstore. 7.7 is a custom order twist barrel. $400 with barrel nut.

Have two 10 round 308 bolt face MDT mags. Also have a 12 round. Used one season this year. Switched to AW mags. Normal marks from inserting/removing.

$100 for both 10 rounders shipped. $55 shipped each.

$60 shipped for the 12 round.

Buy all three, $145 shipped.

PP f&f.

SOLD

Good evening everyone ,
I’m looking for an aftermarket stock for a tikka Supervarmint in 223. I was considering the Bell and Carlson Target stock (CTR) as I also have a CTR bottom metal and mag. It’s gonna be used mainly for FTR / target shooting. Any help and suggestions will be great appreciated

Thank you

I am working on a big game hunting rig based on Terminus Zeus action. Mainly going to be running 300 PRC.

I am not looking for an ultralight rifle. I want it to be shootable and Enjoyable. Perfectly fine if the gun weighs 13lbs no bipod or ammo.

Currently the Foundation revelation and the Manners MCS-LRG-NV are my two choices.

What are yalls experience with these?

​

Impact 737R Short Action Bolt .223-BF / Right Handed/ 90 Degree

It has a few rounds on it and has an Area 419 knob on it.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$386.54

Hello!

I'm fairly new to reloading as I am just starting with PRS over this past summer.


I've noticed a few times that I have trouble chambering brass that I reload, and have narrowed this issue down to brass that was once fired from a different rifle.

A coworker recently gave me a bunch of SRP brass that has these strange lines on the shoulder - He fired them out of his mossberg patriot. I tried sizing one and chambering it in my rifle (savage axis precision) and it will not chamber. In fact, it locks the bolt up pretty bad, resulting in the need to smack it open with a mallet.

The brass hangs up on the midsection i believe, as is evident from the scratches on the case.


IF this sounds like a logical explanation, are there any sets of dies I can buy that will resolve this issue and squish the sides closer to the base back to factory? I am currently using Hornady Custome Grade dies on a lyman american 8 press.

Thanks!

Listing for a friend who decided he want to go aw instead. They all are brand new / unfired.

3x 10rd (902)
1x 5rd (3901)

$200 for all

S&B 4X16 PMII H58 reticle. Used $2000 + Shipping. It has scratches on it. Glass is great and is mechanically sound. What you see is what you get.

I put together a 22creedmoor today for a friend, Kelbly Atlas Tactical in a KRG Bravo, and I’m having some magazine issues. The mag is able to get up too high where the feed lips are stopping the bolt from closing. Easy enough to just push the mag down before feeding but I don’t want him to have to do that in a hunting situation. I’ve looked at other threads of feeding issues but couldn’t find one that matched this problem. Currently using a plastic MDT AICS mag. We tried the plastic magpul AICS magazine from my 22creedmoor and it was a little better but could still get in the way if pressure was put on the magazine or if you slapped it in forcefully. I don’t have any metal mags to try but that may be the solution. I wanted to see if anyone else had this problem or could think of any solutions. I thought about loosening the action screws but that wouldn’t raise it enough without the action just being loose in there. Rifle is a tack driver, already has a kill under its belt with less than a box through it, I just want to fix the feeding issue.

Impact 737R Short Action Bolt .308-BF / Right Handed/ 90 Degree

It has a few rounds on it. Kept it as a backup for spare parts or if a bolt went down during a match.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$331.23

Kahles 624i SKMR3 used. Minor scratches. Mechanically sound. What you see is what you get. $1500 + shipping.

I have a remage prefit barrel in 30 nosler from X caliber. Does anyone know of any place that could re contour it and re flute it? I asked X caliber and they will not do it. They also will not produce me another barrel in 30 nosler bc they do not have the reamers and they will not rent them again. I love the barrel it shoots lights out. I ordered a mcgowen in the contour I wanted, but I prefer the X caliber barrel.

If a manners stock is inlet for a 737. How much will it be off on a Defiance SA. Where the bullet goes in or brass comes out. The part of the stock cut above the trigger. If it's for a standard 700 it's about a half inch that needs sanded back. This manners stock is not flat like the newer ones.

Have a question on my new sac sizing die. Got it setup like the sac sizing die setup video says. Got the decapping expander mandrel in it with a .288 bushing for my 6.5 Creedmoor. The bushing edge (facing the decapping end) is lined up about even with the top end of the expander section (closest to top of die). It sizes with extremely good neck runout (0.0005 to 0.001). However, the shoulder bump seems inconsistent (ranging from 0.000 to 0.002 bump.
Other question I have is it drags pretty hard as the brass is coming back thru the mandrel. It is not smooth. It is jerky and almost squeaks. I use plenty of Imperial Die wax inside and outside neck and on body.
Got suggestions for me?

Original Kelbly LH SA MAG bolt 90 degree. Bought the 75. Didn't shoot this one much maybe 20 rounds. $150 shipped

I have a Grayboe Terrain LEFT Hand stock for a Tikka T3, inlet for CTR, Sendero barrel profile. Has 3 sling swivel studs, 2 flush cups. Includes Tikka factory CTR aluminum DBM and one CTR magazine.

Price is $350 shipped complete or $300 shipped without the CTR magazine. Accept USPS MO or DISCRETE PayPal.

Please advise any questions, thanks for looking.

Selling a like new Boyds Platinum LEFT hand stock for a Tikka T3, Lite barrel contour, inlet for factory T3 bottom metal.
Pepper laminate color.

Price is $100 shipped. Accept USPs MO or DISCRETE PayPal.

Please advise any questions, thanks for looking.

Hey ya'll LaWayne with Straight Jacket Armory here. I'm just interested in finding out from customers of precision shooting and custom rifles what they feel are the best deals they look for. Whether money off, percentage of discount, or discounts on accessories for rifle builds.

Less than 50 rounds down the pipe, proof elevation mtr 2.0 in 223 shoots great just been sitting in the safe. $2800 shipped

I have 248 pieces of brass. Two different lots 95 are new/never fired the rest have 1 to 3 firings. Some have ejector marks but all are still usable. $250 shipped

I have three AICS Accurate Mag and one Accuracy International .308 10 round mags with binder plates. I used two of the AM models a few times for PRS competition with a 6GT round. The AI mag was used once. Please send me a private message to communicate.

$50 each for the AM mags
$80 for the the AI mag

Take all four for $200

Will split shipping cost with you to lower 48. Banned states, please don't. Venmo or PayPal friends and family, or you pay fees for goods and services option.