Here is a BRNO 537 rifle that is very reminiscent of a Vz.54/91. If you look at the shape of the stock in the wrist, palm swell, buttstock, even the butt pad. Appears to be a heavy barreled action in 7.62. I can't seem to find pictures of anything similar.

So I have this problem where I cant for the life of me leave the scope alone and go quietly into the night without wondering whether the scope is absolutely leveled. I've measured it with literally anything in this world that I believe is perpendicular to Earth. I've bought 3 different plumb lines, I've used the flashlight method, 6 bubble levels, I've measured it with every radio antenna, every visible straight line in every building that surrounds my apartment, not sure thats legal while the scope is mounted. I KNOW its leveled NOW but I keep going back to it every time im back from the range or when the rifle/scope bumps against something or a new accessory is installed on the scope. Its taking my precious time away from family, sleep, meals and leveling my scope. Help.

Next up in my downsizing is the 2nd of my 2 Eotech VuDu 5-25. This one is with the Horus H59 Reticle. I bought a second one (both from EuroOptic) because no one else matches the compact form factor(and it's not even close). Excellent glass as well. Made in JAPAN, too. The adjustment lever and bikini cover are included, but are not shown in the photos. $1200 Shipped CONUS

Have some Tikka parts I’d like to sell:

1. Tikka RH Single Stage Trigger - $90
2. Tikka RH Single Stage Trigger - $90
3. Tikka Varmint Stock - $90
4. Tikka CTR Stock - $90
5. Tikka CTR Bottom Metal -$90

I'm relatively new to the A&D world. I bought this FX-300i back in the fall. it has been an amazing scale and I have throughly enjoyed using it!

I have only one question: the power button on my unit is much "softer" than the other buttons on the scale. To the point where it is a little tricky to turn the scale on and off, while the other buttons are very tactile and pleasant to use.

This is a video of what I'm talking about:
Login to view embedded media
I was wondering if anyone else has experienced anything similar, if it is just me etc... Like I said in the video, I don't really care, but I also don't want to have issues later!

PSA GF3 Ak 104, runs flawlessly, less than 500 rounds through it.
Build:
US Palm grip
MI alpha rail
ALG ultra trigger
ALG heavy duty recoil spring
JMAC folder
Std buffer tube with PWS ratcheting castle nut and end plate
Trimmed gas tube wrapped in heat wrap (works very well)
Custom ATACS FG sling


$850 shipped to your ffl

I have four two brand new in box (or in the case of that one, bag). $160 each shipped CONUS (Please don't message me offering $150)

If you're not familiar with the SD-E trigger, it is the same as the SSA-E, but with a flat trigger. I used to have SSA-E's in all of my Small Frame ARs, but then replaced them all with SD-Es. I have four left over from the switch.

Up for sale is Vortex Razor, gen ii, 3-18x in mrad. Comes with the Hawkins mount, power lever and scope caps. Total is $1,550 shipped.

PM if interested.

Hello snipershide, I’m back with another AR10 problem.

I had sent my barrel back to criterion to look at. They bedded the barrel, headspaced the bolt, and gave me a JP high pressure bolt. It was working fine but then suddenly with small base die Handloads and with factory hornady and FGMM ammo it simply will not reliably chamber the ammo. With duramags and PMAGS, the ammo will not chamber every other round or every couple of rounds.

I took the bolt carrier apart (fail zero bolt, JP high pressure bolt and firing pin) and I noticed this weird wear pattern on the top of the bolt. Does this mean my carrier needs to be replaced? I’m thinking maybe it somehow got damaged over the years (it has about 3500 rounds on it) but it isn’t cracked or warped and nothings loose that I can see.

Build list:
Aero M5 recievers
Rifle AR10 extension
Tubb flat wire AR10 buffer spring
KAK 5.4oz buffer
Failzero bolt carrier
JP high pressure bolt, firing pin
Geissele SSA-E
Criterion 20 inch stainless 6.5 barrel
CMT rail
Revival defense brake

Attached are pics of the bolt. Nothing seems to be warped and I can cycle the bolt just fine but ammo will not reliably chamber. I think the carrier is damaged but I wanted to get a second opinion before purchasing a rubber city or other carrier. Thanks!

First start off by saying I have a B14R factory rifle in a MPA comp chassis

It has shot decent. Not super but good enough

I shot it a bunch last year and somewhere along the way left my suppressor on and based on my cleaning and borescope exam I have pitting in my barrel

Not a huge deal but I'm really hoping to stretch its legs this year in long range rimfire and torn on what I should do

I know guys here have owned many rimfires.

Would an upgraded B14R with the bolt smoothed out and custom modacam barrel be worth it. Or should a guy invest in a Vudoo or Rimx instead

I’m looking for accuracy. I don’t compete but if I did it be in a open class much like fclass as that’s what our local club does

Looking for opinions on which way to venture

Before someone says shoot it and see what it does. I plan to shoot it. I’m looking for the next step regardless.

Remington .30-30 Win 150gr Core-Lokt Soft Point R30301 160 Rounds $100 shipped

I have a very lightly used Surefire M3LT-S Combatlight Dual Output LED handheld. This is a throwback to 2012. I bought this brand new in January 2012 and it did not see much use.

This model has the dual output LED (70 low/800 high lumen output) with strobe mode. The lens is the TIR Fresnel version with a very focused, clean hot spot.

There are a few handling marks on the bezel edge and the tailcap, but the light is in great condition and it functions flawlessly. The lens is immaculate.

Comes in original box with manual.

Asking $155 shipped

PayPal FF, Venmo or Zelle for payment

̶F̶o̶r̶s̶t̶e̶r̶ ̶S̶t̶a̶n̶d̶a̶r̶d̶ ̶F̶u̶l̶l̶ ̶L̶e̶n̶g̶t̶h̶ ̶6̶ ̶G̶T̶ ̶S̶i̶z̶i̶n̶g̶ ̶D̶i̶e̶:̶
̶$̶4̶0̶ ̶S̶h̶i̶p̶p̶e̶d̶ ̶O̶R̶ ̶$̶9̶0̶ ̶S̶h̶i̶p̶p̶e̶d̶ ̶F̶o̶r̶ ̶B̶o̶t̶h̶ ̶D̶i̶e̶s̶ Sale Pending...

Selling because I got a SAC modular sizing die for the GT family. I don't know exact "round count" on this but it is for sure less than 100. Full disclosure, the first few threads on the lower part of the die are definitely a bit rough. Shouldn't be a problem unless you are planning on taking a lock ring on and off a bunch.




̶F̶o̶r̶s̶t̶e̶r̶ ̶B̶e̶n̶c̶h̶ ̶R̶e̶s̶t̶ ̶M̶i̶c̶r̶o̶m̶e̶t̶e̶r̶ ̶S̶e̶a̶t̶i̶n̶g̶ ̶D̶i̶e̶:̶
̶$̶6̶0̶ ̶S̶h̶i̶p̶p̶e̶d̶ ̶O̶R̶ ̶$̶9̶0̶ ̶S̶h̶i̶p̶p̶e̶d̶ ̶F̶o̶r̶ ̶B̶o̶t̶h̶ ̶D̶i̶e̶s̶ Sale Pending

Selling because I got a SAC infinity die but used this one for approximately 400 rounds before getting the SAC die. There is some light rust spotting on the outside of the cartridge sleeve and a few (4) spots inside it as well. I tried my best to get pictures showing it, but taking a macro photo in focus was challenging with my phone. I have attached some example pictures but if anything the pictures makes it look worse than it really it. Surface texture is fine and not compromised, just visually got a few blemishes.



̶F̶o̶r̶s̶t̶e̶r̶ ̶6̶m̶m̶ ̶3̶-̶i̶n̶-̶1̶ ̶C̶a̶s̶e̶ ̶M̶o̶u̶t̶h̶ ̶T̶r̶i̶m̶m̶e̶r̶:̶
̶$̶5̶0̶ ̶S̶h̶i̶p̶p̶e̶d̶ Sold

Thought I was going to use this for my 6GT brass but I am just going to end up buyin a giraud anyways. Never used.


̶H̶o̶r̶n̶a̶d̶y̶ ̶B̶l̶e̶m̶ ̶6̶m̶m̶ ̶1̶0̶6̶ ̶G̶r̶.̶ ̶A̶-̶T̶i̶p̶s̶ ̶(̶D̶o̶D̶)̶ ̶̶̶1̶̶̶0̶̶̶0̶̶̶0̶̶̶x̶̶̶ ̶5̶0̶0̶x̶ ̶R̶e̶m̶a̶i̶n̶i̶n̶g̶ ̶:̶
̶5̶0̶0̶ ̶-̶>̶$̶1̶7̶5̶ ̶S̶h̶i̶p̶p̶e̶d̶ Sale Pending...

Bought these in March 2024 with plans to test/use them in my 6GT but ended up picking up a ton of Berger 108Gr BT bullets since its really likes them. The boxes were pretty beat up when I got them so I had to repackage them into new bags. Lapua boxes not included


̶H̶o̶r̶n̶a̶d̶y̶ ̶B̶l̶e̶m̶ ̶7̶m̶m̶ ̶1̶9̶0̶ ̶G̶r̶.̶ ̶A̶-̶T̶i̶p̶s̶ ̶5̶0̶0̶x̶:̶
̶5̶0̶0̶ ̶-̶>̶ ̶$̶2̶5̶0̶ ̶S̶h̶i̶p̶p̶e̶d̶ ̶O̶R̶ ̶1̶0̶0̶ ̶-̶>̶ ̶$̶6̶0̶ ̶S̶h̶i̶p̶p̶e̶d̶ Sale Pending...

Bought these with the 6mm blem A-Tips for a new 7PRCW build but never got around to it. Boxes on these are still beat up a bit but were better than the 6mm ones. 4 sealed boxes + 1 open box repackaged into a new bag.



̶H̶o̶r̶n̶a̶d̶y̶ ̶.̶2̶2̶ ̶8̶8̶ ̶G̶r̶.̶ ̶E̶L̶D̶-̶M̶ ̶1̶5̶0̶x̶:̶
̶$̶2̶5̶ ̶S̶h̶i̶p̶p̶e̶d̶ Sold

Completely forgot I had these until I was grabbing the other items for pictures. Bought these for my 22GT but they did not shoot well in my rifle. Don't think its anything wrong with the bullets, just that they aren't a good match for my particular rifle. 1 sealed box + 1 open box of 50 repackaged into a new bag.



Please comment here before sending your PM. All sales discreet (no commments) paypal f/f or venmo. Shipping will be done your choice of USPS or UPS and will be fully insured. Happy to provide additional photos if needed or answer any questions.

Saw maybe 400 rounds and has been sitting in original box with packaging as my spare. Don’t need it. Can provide photos if desired. Sticker on it and it clearly has very very minimal use.

$240 shipped OBO Venmo or PayPal f&f only.

Is Dead Air's Keymo QD system a relatively consistent way to add and remove a suppressor from a rifle? I'm under the impression adding a can to a rifle is going to cause a point of impact shift. But is it possible to have a quick detach system that is a consistent enough way of attaching a can that the POI shift is the same each time the can is removed or attached. Or is that impossible?

PEQ 15 full kit DOM Sep 23 $2200
Clean illuminator

PEQ 15 sold
Clean illuminator with no kit

Anyone have any? Hands on? Touch feel and taste? What do y’all think???

Looking to sell my ridgeline defense lpr. Rifle has exactly 100 rounds through it. Was going to use it in some matches but that’s not gonna play out now. Has two marks on it that I’ve photographed and will show to the best of my ability.



Scope and bipod not included. Will ship ups insured. Ffl must accept from individual. Happy to send more pics and info if needed.

2400$ shipped and insured
PayPal f&f or uspsmo

Want to buy a 419 hellfire, preferrably match, in 6.5mm stainless.

Vortex strike eagle 1-8x24 30mm SFP
AR-BDC3 MOA reticle with Burris P.E.P.R mount. Only used a couple times.

$235 shipped to lower 48 in original box

Can someone here tell me what our allies in the EU have done for us in the past 80 years?Seems like it has been an exclusive one way street to me.

Original cloud defensive rein weapon light. Like new/never mounted $200 shipped.

21st century concentricity gauge with wheel and indicator. Like new, I never used it. $215 shipped. Retails for $335.

I know this is a reloading forum, but most non-reloaders won’t know what I’m talking about.

New 6.5creed barrel is hitting the lands at 2.792” with the 140gr smk. This seems short, but may be in spec (not sure what spec is)? Anyone else have to seat these bullets below 2.800?

My apologies for retreading well-worn ground. Also for being verbose, but I hope to provide useful details that will allow those with greater knowledge to guide me. I will say upfront that I have spent the last couple of weeks reading as much as I could find in terms of individual reviews and comparisons, including here, on forums such as rokslide, LRH, and reloading, and on reddit.

I currently own a Tikka T3x Lite in 6.5CM and a Bergara B14R in 22LR; both are phenomenal rifles that I have reached .5 MOA with - I am the limiting factor. However, the T3x is my hunting rifle, and, with one of their pencil barrels, its accuracy opens up after 10 to 15 rounds. The Bergara is only good to about 300m, and that's on still days - even gentle winds send subsonic 22 match ammo sailing to the sides. My nearby range is 50-200m, but my friends and I have recently discovered multiple ranges that go out to between 600 and 1000m within driving distance. We intend to start training on longer range shooting, estimating windage from vegetation, all the fun stuff. I have begun competing at my local club in 22LR 100m bench matches, and may join the 200m high power rifle NMC matches with this new rifle. Additionally, my best friend just got an MRAD, and I got to see the difference that was firing a heavy rifle with a muzzle break compared to my Tikka, as well as a completely different trigger.

Regarding reloading: I do not currently reload. I already find reloading fascinating, and have spent hours reading other people's discussions about powders, seating depths, barrel wear, etc. If you could not tell, I am an engineer. I think I would love reloading, and once I move (projected to happen in approximately 6 months), if I find myself shooting sufficient quantities, I will invest in reloading equipment. I have already been saving all my shot Tikka brass.

What I am looking for: A high-precision, chassis-based, bolt-action rifle that won't break the bank.
A couple of wants:

• A long, two-stage trigger - I found the MRAD trigger to be more to my liking than either my Tikka or Bergara, even though both have VERY crisp triggers. I'm weird. The take up helps me prepare my shot. This looks like something I am unlikely to get in a noncustom rifle.
• While not mandatory, I really like the quick change barrel/bolt head systems that some of the rifles have, so that I could theoretically bang out a whole bunch of cheap .308 for practice, then swap to a hotter 6.5CM or even PRC for competition (depending on range). Is this silly, compared to just getting a 6.5CM and using prefits?
• A heavy rifle with a heavy barrel - something around 15 lbs.
• The chassis must have (or have as an accessory) something akin to an NV bridge - I wish to use an over the bore bipod.

Cost definitely matters. I'd like to keep the rifle itself sub $2500, but I could stretch that.

The first rifle that caught my eye and sent me down this rabbithole was the Seekins Precision Havak HIT Pro M3. It checks nearly every box, except that it would need a number of modifications from stock form to get there (weights, accessory bridge, new trigger), driving the price up. Still, is Seekins the best company, and this the best rifle, here?
Then I saw the Bergara Premier Competition Rifle. $2300 at EuroOptic, uses MPA's chassis....I'm already a bit biased towards Bergara because of my current rifle. But while looking up that MPA chassis, I stumbled across the MPA Vanquish/Matrix/BA PMR Pro Rifle II: which guarantees 0.5 MOA accuracy, one of their gorgeous chasses, a variant of ARC's Coup de Grace action, although it is unclear if you can change the caliber as easily as the Seekins.
And then there is the Daniel Defense Delta 5 Pro, also coming in hot with the 0.5 MOA guarantee, interchangeable 26" barrels, and fries.
Which of these is best? Or should I find a gently-used custom, something like this: https://www.snipershide.com/shootin...a-gen-1-matrix-chassis.7248865/#post-12043172
To those who have read all of this, many thanks! Please, share your wisdom with me!