Let me know if you have one you’d part with. Thanks

I acquired this rifle earlier this spring knowing it was only a good price at the time but not really exactly what I have a use for and I had a Manners LRH non-minichassis that I was kicking around selling so once I looked at the logistics of milling the stock and bedding it for the Anschutz, I held my breath and started cutting. Took me about 45min on the mill to get it real close, and got the pillars ready. Now I have to drill for the pillars and epoxy them and begin the wait

As far as the barrel, I wanted to try something new and with a little planning, I had my gunsmith cone the breach on a Kidd stainless barrel and with 50 rounds thru it, I found it really really likes SK and once the weather gets better, I have some center X to try.

Fun tinkering project, I don't have any reason to no think this will be a great plinker even if it is only a single shot

Good condition - no use for them anymore.

$40 shipped

Looking for a surefire 3 prong for the Steyr AUG threaded in 13x1LH.

.

Used this for a few years in nrl hunter matches, works fantastic for either that or a lightweight hunting rig. There’s slight wear along the arca rail.

Spec’d out with a vertical ergo grip and carbon stock in tungsten grey. Asking $1050 shipped.

skeet ir-L with wilcox flip to side mount, data cables, pouches, manual included. arid wrap, $4000

cash only not in a rush to sell

Magpul prs gen 3. Like new. Trade for b5 cps medium. $180

I have a lightly used spuhr RDF-20225 aimpoint mount with magnifier yoke and picatinny rail for sale.

SOLD
Discreet PayPal friends and family

The magnifier, t2, cap, and rifle pictured are NOT INCLUDED and NOT FOR SALE

Vortex Razor Gen III 1-10x24 with EBR-7 (MRAD) reticle. Includes a Switchview throw lever, box and paperwork. There is a small dent on the top that looks worse than it is, but you can feel it when you run a finger over it. It doesn’t affect function, and it could be covered by a scope mount so you would never know it was there. $1525 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-Modbutton Lite (SF Plug)
-Scalarworks Leap 08 (30mm/1.57”)
-Surefire Scout QD Mount (Larue/ADM)
-Radiant Raptor, Griffin SNACH, FCD ACH

Looking to sell an extra barrel. Prices are before shipping, not looking for any trades.

AI win Tac 6 Creed barrel 300 rounds fired. $499.99 plus ship

20-24” ideally 1-10 twist.

We all know .308s last forever, just looking for something to plink with.

I can provide a shipping label to make your life easier.

I subscribed to Paramount + to watch Taylor Sheridan's Landman and am not dissapointed.
I binge watched Episodes 1-5 until I got caught up and just watched 6.

I was dissapointed Tommy and his thumpers didn't completely wreck 'Manny' and the other rat on the crew involved in his son's beating. I was hoping those pipe hitting n****** would go medieval on their asses with a plier and blowtorch.

I hope they do better when they find the others involved.

Having a few extra parts sitting around has turned into building another upper then getting a lower for it and having an extra rifle I don't actually need too many times. I have more ARs than I need and this configuration is redundant. I also have some other AR parts stilling around so I don’t mind swapping a few things to align to what a buyer is looking for.

• 16” 5.56 Ballistic Advantage modern series barrel with mid-length gas port, 1-7 twist and black nitride coating.
• Adjustable gas block
• Tool Craft BCG with black nitride coating. C158 bolt that is MPI, staked gas key bolts, etc.
• ALG Defense 13” M-LOK Ergo free float hand guard. I have a co-witness rail section for it for adding a front sight.
• Strike Industries chagrin handle.
• Muzzle brake(I think it’s Strike Industries)
• PSA receivers. Lower was purchased as a full MOE lower with their EPT fire control group.
• Magpul MOE stock
• Magpul K2 grip(I swapped from the MOE grip)
• EPT fire control group: Polished and nickel boron coated trigger parts
• Currently has a Vortex Strike Eagle Gen II 1-6 scope on it zeroed at 50 yards for 75gr Hornady BTHP
• Scope in Aero Precision mount
• I'll include 1 30 round mag

ALG hand guard, strike industries charging handle and Vortex scope were used on previous rifles but everything else was brand new with just one range trip to zero it with only about 20 rounds fired. It shoots well with 1/2-3/4" group at 50 yards when zeroing with 75 gr Hornady BTHP.

$750 for the full set up with scope.
$500 for rifle with out scope.

I can reconfigure with a Sig Romeo 5 red dot and/or some Magpul Mbus flip up sights if the buyer prefers that. I can also swap in a CMC or Rise Armament trigger if the buyer wants for a little more.

Can only ship to an FFL and to a state where this is legal. I have a local FFL that can act as a shipping FFL for a small fee if your FFL won't accept shipments form an individual.

US Optics red dot on overbore mount 180.00 - - Trijicon ACOG TA31H-A SOLD - Warne 34mm mount 75.00 - Nightforce 30mm extreme duty 1.9 250.00 - RMR 06 good shape one with rifle mount one does not SOLD - RMR 06 HRS SOLD

I'm looking for some ARC 308 mags if anyone has some they're willing to let go
Looking for unaltered feed lips and mag catches

New never mounted, just took out of box for photos. Never been in the field. Inlet for Tikka T1X, $275 shipped.

REM SA
FDE
With KRG arca rail

375 tyd

Brand new in sealed plastic. Mod 1 with all the bits nano coated. Look at pics for more details.
I have a full build same as this upper and it is my favorite ar.
900 Tyd no trades paypal gift or zelle.

Shckma

Looking to sell 4 kits of lightitup occular lights for a sendit. This kit has 5 lights rather than the 3 of a brandt built. There are enough parts to do 4 scopes.

Looking for $35 shipped for everything
Payment via papal f&f or zelle


Sold!

Listing up a very rare Winchester Model 52C Bullgun.

Very few of these made. You will often see Heavy Targets listed as Bullguns.

A true Bullgun weighs 13.5 pounds and a heavy target is 2-3 pounds less. I have seen only two in 35 years of looking.

This one is very clean and stunningly accurate.
1800 plus shipping cost. I will include Unertl bases and can sell target sights or Unertl scope if wanted. (See my other ad for scopes available.)

It will include a single shot adaptor or magazine as buyer wants.

Also have many 52 C accessories if interested.

PM for details or photos.

PRICE 1800.00 plus actual shipping cost.

Does anyone know where I can get an M24A2 barrel done up with the AEM M24 suppressor seating ledge?

Bonus question, what is a good action to work off of? I’ve heard the modern Remington actions are junk.

I have an MPA standard recoil pad i’d like to sell.

Looking for:
$30 for the recoil pad assembly
Sold!

Bag bullet is sold
All prices include shipping, payments via PayPal f&f or zelle

Looking to sell my grayops bag stop, this is the longer version, i modified the back so it would sit further back on a masterpiece arms ba comp chassis. Does not affect its performance.

Looking for $65 shipped, payment via PayPal f&f or zelle. Sold!!

Trijicon RMR06 Type 2, 3.25 moa, adjustable dot, excellent condition, glass is perfect, box and papers.

$400 $385 shipped. No trades. Paypal F&F (preferred), venmo, check/mo.