Selling my 7 SAUM barreled action.
- Defiance Classic LONG ACTION
- Proof Research 18” carbon wrapped barrel
- SRS TI Pro 3 port self timing brake
Chambered by Denny Powell in NM. Action, barrel, and brake are all cerakoted in Sniper Gray. I’ve shot about 320 rounds through it. This is great for an ultralight rifle build.
$1,600 shipped to your FFL.

Selling new unworn Sitka stratus pants in size large. They still have the tags, purchased but never used them. $200 shipped

Seems they have Green Mountain barrels that you can customize to your liking for around $260. Seems like a decent price if they are good.

Selling my Razor LHT 4.5-22x50. This is the MOA version. Used but in great shape still. No scratches or nicks. Comes with everything factory plus a throw lever.
$1,200 shipped

Price Drop For Sale: Nemo Omen Match 22" Bergara match grade stainless steel barrel chambered in .300 win mag. Less than 5 rounds through the gun. 4-position adjustable gas block, NEMO DC-1 6AL-4V Titanium dual chamber muzzle device, NEMO matched billet upper and lower receiver set, 7075-T6 aluminum with ambi safety and mag release, 14.75” 6061 extruded aluminum, High Pressure bolt 9310 heat treated Cryo’d shot peened MPI (magnetic particle inspection) Nickel Boron coated, NEMO’s patented Recoil Reduction Bolt Carrier – 8620 steel, heat treated, Nickel Boron coated, M-LOK modular rail mounting system, Lightweight heat dissipating barrel nut 7075-T6 aluminum, Magpul PRS stock. 2x 14 round magazines + the Nemo Drag Bag. Includes bi-pod - Asking $4,800 4,500+shipping (certified payment before shipping) or pick up local - DFW area

VMR-3 mils
Defender front cap included
Only took to the range once. Box and docs included.
$550 bare scope $650 with Nightforce rings
PayPal f/f

I have a very lightly used RRS 22i compact tripod I’m looking to sell. Used a couple times for coyote hunting. Only reason for selling is I need to get the regular version for a bit more height.

$825.00 shipped in the lower 48
PayPal friends and family

Ball head and adapter not included

Any good tricks to tune magazines for the 6 GT? Rifle has a master piece arms chassis and has some feeding issues.
Thoughts?

I have an excellent condition MPA Matrix pro for sale. It is short action 700 clone, ambi cut in Tungsten. It has the vertical 2 and 3 grips and all the different thumb shelves as well as the NV bridge. It also has the full gray ops internal and external weight kit. Chassis doesn't show all the weights. Also has the matrix bag/mag stop.

Asking $1450 for everything to your door.

Outstanding glass. 1x is very nice with a big FOV.
Only selling due to putting a shorter barrel on the set up and went to a Mro for weight savings.

Leupold mount is optional.

$625 shipped for scope.
$750 shipped with mount.

I'm updating my VMware ESXi home lab and selling off the equipment. I will have 4 of these to sell, this is the first one. These suckers are little beasts. It is still under warranty by Intel for another year.

The NUC is a great computer, these are only about a year and a half old. This unit has a ton of USB ports AND it fully supports Thunderbolt 4. (I have thunderbolt external 10Gb SFP+ NICs, external NVMe adapters, and full side card expansion chassis to go with this unit if you are interested.)

Comes with the original box, VESA mount (for mounting to back of monitor), power supply/cord, and the screw package / theft prevention mount.

Intel NUC Pro i5-1240P (NUC12WSHi5) in this post has the following specs:

- i5-1240P (12 core [16 threads via 4 hyperthreaded performance cores]/ 4.4GHz) processor
- 64GB of RAM (Yeah, that's a lot for most people)
- 2 x Thunderbolt 4 / USB 4 ports
- 2 x Intel® Ethernet Controllers i225-V (2.5Gbit Copper)
- 1 x Intel® Wi-Fi 6E AX211 (Gig+)
- 2 x HDMI 2.1 TMDS Compatible, 2x DP 1.4a via Type C USB (aka had HDMI and USB-C Video)
- 10 x USB Ports (1 USB 2.0, 3 USB 3.2 Type 2, 1 Internal USB 3.2 Header, 2 USB 2.0 Ports via M2 Expansion Header, and the Thunderbolts Ports)
- 1 x Bluetooth 5.3 Radio
- Audio headphone / mic jack
- 1 x NVMe PCIe x4 Gen 4: M.2 22x80 (key M) slot [currently empty]
- 480Gb Crucial SSD
- Intel IRISxe Graphics
- Ubuntu 22.10 Linux installed (Windows can be installed over top of it, I just wanted to make sure you have an OS.)
- Unit will come with the latest BIOS. Note: Asus bought the Intel NUC line from Intel and the BIOS may say Asus during boot.

$500 cash price, $600-700 in trade value (to buy anything comparable is at least $800-$900...)



Full Specs (minus the 2.5Gbit / 2xUSB expansion bus):


Intel Expansion Bus for additional 2.5Gb Ethernet Port and 2 x USB ports:


Crucial RAM 64GB RAM kit info:


Current NUC 12 from NewEgg (barebones):


Similar Crucial SSD:



Will get pictures when I had a moment.

Leupold Golden Ring 30x60mm Black Armored Spotting Scope 43793 NOS made in Oregon, USA with full lifetime warranty.

$SOLD shipped CONUS, payment via Zelle, no trades.

Want to trade my Factory Radian Mod 1 9” 300 blkout with geissele trigger in factory urban camo. The main trades I’m interested in are as follows: Scar 16 NRCH in FDE, Staccato XC (like new in factory condition, can have rmr), nighthawk sandhawk with comp (or similar nighthawk 2011 with comp), potentially would consider other high end 2011 between xc and sandhawk quality, would entertain other high end rare trades. I know all the trades listed will require cash from me and I am prepared for that. Let me know what you have! $2800

Same specs on both barrels, one fluted one is not. Fluted has about 50 rounds on it the other unfired. 1" @ muzzle. Unfluted 4lbs 12oz, Fluted 4lbs 4oz.

$SOLD/ea shipped or pick up in DFW TX

No trades

20" .308 Winchester M24 Profile Barrel - Black Cerakote

Barrel Features:
M24 profile
5/8-24 TPI muzzle threads
1:10 twist
Elite Cerakote Finish
Honed and Lapped
Works with our SOLUS Actions
Compatible with Zermatt/Bighorn Origin Actions

Probably a stupid question and I am good at that.

When Hornady came out with the 7 mm PRC, they pointed out that if you already had a 7 mm Rem Mag or .300 Win Mag, you could swap barrels and even use the same bolt face.

LIke any rifle where you might replace a barrel or trigger assembly, you don't need a 4473 federal transfer. Because those are replacable and not serialized. The receiver is holds the serial number.

So, if you put a 7 PRC barrel on a .300 WM receiver, is it still legally a .300 WM, which is what it was when you bought it and transferred with a Form 4473?

Do you run afoul if you don't file a change of caliber associated with that receiver?

Does it matter? The SOCOM MRAD, which you can buy, has .308 Win, .300 Norma Mag, and .338 Norma Mag barrels and parts. Only one receiver presumably having the serial number.

I try to foresee ways the commies could come at us and worry about crap like this.

Given the same weight bullet, is there an advantage to a 6mm CM with a light bullet vs a 22 CM? Looking at load data there seems to be a couple hundred fps difference, with the 6mm CM being faster.

SOLD - Lightly used Integrated Components Dual Bridge System. Mounted on a Wilcox G24 mount with a Nox 18 on the right side and nothing on the left.

No box.

$450 400 325 shipped. No trades.

Only available to US Persons in the US.

I can take paypal f&f, zelle, or check.

cross-posted so first "I'll take it" wins.

I’m thinking of investing on a 1550nm handheld RF with BT and AB. Looks like PLRF25 BLE X3 is the only one still out there? Is there others that I should be looking into? Not investing on any 905nm types. I’ve tried a few of them including some bino ones, and when the heat wave starts they just don’t give readings. Or give inconsistent readings. But when I range with my Raptar S, it slices through the heat wave and gives reading.

I installed my action into this stock a couple years ago. If I pinch the barrel and the tip of the stock together, the barrel would make contact and thought maybe that’s normal? Tonight I took it apart to clean it and noticed the barrel nut marks on the stock (see picture). I don’t recall if this was there when I first installed it or if the impression was created when I first installed it. Is that impression okay or do I need to sand it down so no contact is made? Could this be causing the flex and the action not being fully seated to the bed? Thanks.

Sold

As part of the great night vision part out here is a slightly used G24 mount in tan. Has been on a helmet that was taken out once.

$400 shipped. Open to reasonable offers but no trades please.

Only available in the US to US persons. Don't blame me, blame ITAR.

I can take paypal f&f, zelle, or check.

Cross posted, so first timestamped "I'll take it" wins.

Anyone have an extra bag rider for a JAE700

Actually could use another night vision mount too.

Looks like a pretty reasonably priced trigger @ $119

Anyone have feedback?

HELLS ANGELS ON WHEELS (1967)

Starring: Jack Nicholson, Adam Roarke, Sabrina Scharf, and Sonny Barger.

Login to view embedded media

In a dusty and rugged part of San Francisco, the hard rock, brawlers, and hippies capital of the 1960s, 'Poet' was a restless young man working a dead end job at a gas station. Already a seasoned street fighter, his temper was short, made even more volatile by crusty scalawags who kept testing him. Every interaction could end up with him dealing out an asswhooping and Poet knew that his time at this job would be short. One day, a band of Hells Angels riders stopped by the gas station. For Poet, nothing was more alluring than being a member of one of the largest and most notorious outlaw motorcycle clubs in the country, and he made up his mind as he took in the acrid fumes and the growling thunder of Harleys idling around him. One thing led to another and Poet was invited to become a hangaround of the club, and then a patch-rocking prospect. However, as Poet's rough and tumble nature carried him up through the ranks of the club, he learned that with every step in that organization came with hard prices to pay, far harder than a metal chain enclosed haymaker connecting with a skull in the most brutal alley fight...

Playing the President of the Hells Angels MC in this movie is none other than Sonny Barger himself, who in 1967 was the chapter president of the Oakland, California HAMC charter.

New never used. $65 shipped.

ONE new in box LPM Baby Bell muzzle brakes for any suppressor using Plan B mounting. Threads are 5/8-24. $55 shipped