Just like the title says, looking for 200 or so pieces of once fired FGMM 308 brass in good condition.
Thanks!

Tossing around the idea of selling or trading my barreled action chambered in 6.5x47.

Mack Brothers EVO 2 SA BDL(Works 100% with DBM)
Brux 1:8tw 30” 1.25” straight barrel, unthreaded
Mack Brothers 20moa scope base

It has well under 400rds, and it shoots fantastic. I have printed .2s and .3s regularly at 100yds. I have a 30 Sherman Magnum that is getting finished up and between my other rifles, this may not see much use. $1500 shipped.

Trades considered:
Mk12 Mod0 upper
223, 308, or 6.5 Creed bolt gun
AMP annealer
Dillon 750/1050
Optic in the 5-40 magnification range

Selling my 4DOF Kestrel, moving away from the Kestrel in general. $340 shipped with case

Does anyone have purchasing experience with Bullet Central?

Just ran across the site and was curious. Thanks folks!

New in box Zulu 6 16x42 the box has not been opened $950

NightForce UltraLite UniMount in Excellent Condition.

Model # A257 34mm x 1.44" x 20 MOA

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$171.74

Looking to sell my RCBS Chargemaster. Only used it for about a year. Has all the stuff that came in the box. Like new condition. Don't need it and looking to make room in my office.

$125 shipped to lower 48

Hello,

I've been able to take over as a match director for a local club in Alabama at Brock's Gap Training Center. We've had the match for about 2-3 years and folks seem to enjoy it as we've seen numbers increase from the 4 shooters we had at the first match to around 25.

Just wanted to welcome competitors to the match. I'm going to do my best to run the match efficiently and let me know if you have any questions.

Registration link:

https://practiscore.com/brock-s-gap-dmr-january-match-2/register

I have 2 5-27 ZCOs for sale. One has MPCT2 reticle and the other is MPACT3. These have the 15 mil locking turrets. Excellent condition and I wrap them right out of the box. I removed wrap on the one as it had been listed previously. I also have original boxes.

ZCO is going to raise prices again so these are a great discount.

First one to say I’ll take one gets the WMLRF bridge for free.

$3650 to your door. $3500 to your door.

Take off LMT DMR 5.56 Stock in Black

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$248.12

Brand new in box Zermatt Ti3 Titanium action. Short action, .473 bolt face.

Changed my plans for a build.

Trades:
NF 1-8 ATACR

$1550 shipped and insured to your ffl.

***SOLD***

I have a Vortex PST 5-25 that has been mounted and used for about 20 shots. I decided to go a different route. My loss is your gain. $950 including vortex pro rings

I just need to vent a little , I have a niece that's marrying a butch woman , got the invitation back in the summer , the weddings next week , I never responded to the rsvp , mostly because I don't condone same sex marriage, so my brother calls (he's the grandfather) and asked if I'm going ,I let him know my stance on the matter and I won't be attending , I'm a Christian and I know I shouldn't judge others lest I be judged , but I'm not going to celebrate something I consider a sin , and yes I'm a sinner too , but the difference is I'm ashamed of my sins I don't celebrate them , still can't believe we have a pride month, my mom who's 86 said she's not attending either so at least I won't be the only family member not going , I'm I being a prude for not caving in to this shit , it will probably ruin my relationship with her father who I am sorta a second father to , but I guess that's the price I have to pay for standing up for my beliefs, what say the hide .

Please help!! I lost the trigger adjustment screw for my B14 ridge, it still shoots but with a very light trigger can anyone tell me where I can find another.

HK, Glock, SIG, Kimber pistols for sale various pistols for Sale.

Pictured: HK P30L - 9mm - brand new unfired. $600

HK VP9L - 9mm optics ready - brand new unfired. $700

HK USP compact .40 and .357 sig barrel SS - used but in excellent condition. $650

HK P 2000 .9mm - used excellent condition $650

HK 45T .45acp - used excellent condition. $650

Kimber 1911 Shadow ghost .45acp - excellent condition - $550

Sig 1911 Max Michell .45acp - excellent condition - $995

Sig p320 XRP with Romeo 1 pro - excellent condition - $$650

Glock 19 gen 4 9mm - brand new unfired - $550

HK USC 45 carbine - less than 50 rounds fired - $950
- includes surefire light Text me with questions.

720998477six NO TRADES Please

And by this question, I mean, "Are you concerned at all about the Feds being able to track your gun/ammo purchases via Credit/Debit card usage" (ie. those little merchant codes)? 2025 is, more than likely for me, going to be more of an "ammo" year than a gun year. I may get some accessories and/or parts, but mostly I'm looking at beefing up ammo inventory. And, while I'm pretty sure I can stay away from ammo sources in Kommiefornia (where they're doing all sorts of crazy "shiznit," - I don't like that because I can get some good deals from there), still, I wonder about federal efforts and whether or not the dealers/mfgrs. are getting pressure to use those codes. I'm not sure what the status of those fed based laws are at present. and I'm also not sure what will happen once Pres. Trump takes office. Will the Federal effort stop, or are they just going to do it any way even after being told it's "illegal/unconstitutional?" The Feds are notorious for that.

So how will you get your ammo in 2025? Of course, the safest way would be to go to a local store and buy it, paying cash. But that's kinda hard to do given how much those merchants mark up ammo, as well as having boxes of 1000 rounds available for sale to one specific buyer. And one loses out on all the ammo deals available "on-line" (which I track via AmmoSeek.com every week for the calibers that interest me).

Are you guys going to wait and see what happens with Trump, or just go ahead and get what you need when you need it, not caring about how the sales are being tracked)? I wish there were ways we could get around those codes, but I don't know if that's possible. I'd imagine the feds would be on to any "trickery" a merchant attempts to disguise ammo/gun sales under a different merchant name or the like. And some merchants just don't care. They'll do it "in defiance" of the feds and expect you to go along for the ride. Can't go with them... Sorry.

What say you, then? What's your strategy for buying ammo (and guns) in 2025 and avoid being tracked?

Black nitride and in decent shape…. Works at it should. No adapter included

Used maybe twice. In great condition. I removed the straps as they got in the way. Had it bungeed to by belt

I've been searching pretty hard to see if there is load data out there for N133 & 75 ELD's (and 62 ELD-VT's) and for whatever I have not been able to find any. I know the 62 ELD-VT is a pretty new bullet but the 75's have been around for awhile. I have not been able to get my hands on 8208 or 4895. Ramshot Tac yielded some pretty huge spreads (ES's around 100 & SD's in the 40's) in Velocity but decent groups (around 1 MOA). I was able to get my hands on some VV N133 and tried to use some data I found with Benchmark powder to get started.

I will preface this with the fact that I am running an 18" - 7 Twist Proof Barrel chambered for the 75 ELD to be about .020 off the lands at 2.550 COAL.

I shot the 62 ELD-VT at a COAL of 2.517 (seated so the Boat-Tail sits at the Neck-Shoulder Junction)

5 Shot Groups

22.0 Gr. N133 AVG. Vel. - 2750 FPS (No Pressure)
22.5 Gr. " " - 2805 FPS (No Pressure)
23.0 Gr. " " - 2870 FPS (No Pressure)

None of these Yielded anything great, 22.5 gave me just inside a 1 MOA group. I chalked that up to possibly be jumping them way too far on account of my chamber being cut for the 75's.

The 75's yielded me some better results.

75 ELDM - COAL of 2.550 - 10 Round Groups

21.8 Gr. N133 AVG. Vel. - 2650 FPS (No Pressure)
22.0 " " - 2670 FPS (No Pressure)
22.2 " " - 2700 FPS (No Pressure - Best Group 3/4 MOA or better)
22.4 " " - 2730 FPS (No Pressure)

I am going to turn up the charge with the 75 ELD's to see where I find pressure and will update once I do.

All groups shot with N133 gave me what I consider to be acceptable SD's considering this cartridge and the purpose of the rifle.

If anyone has an experience with N133 and 75 ELDS in a Bolt Rifle any information would be appreciated.

Not clone correct but has anyone gotten their hands on the AEM5K yet? I think it might fit the RECCE a little better. Would be 2” shorter with the K can. I kicked around doing the AEM2 or 3 for the RECCe build but I didn’t want another 14.5” so I kept the 2.5” spacing. This can seems to fill the niche I was looking for.

Curious how it performs. I expect a little louder but with less baffles, I wonder how gassy it is compared to the full size can and what the time is like.

Tried it but prefer my other bags….

In great shape

Brand new with a good deal after the holidays.
Send me a message if your interested.

No need to wait, BNIB Dark Distressed Foundation Samson with Brass for a Zermatt TL3.

For Sale: Brand new XLR Push Button Folding Adapter. Purchased with a new XLR chassis but decided not to use.

$125 Shipped.
PayPal Friends & Family for Payment

Selling a used ADM 1320 Recon-SW 30mm (0 MOA) scope mount. Good condition, few nicks and scuffs from being used.

$OLD

PayPal F&F or Venmo or Zelle for payment.