Hello fellow Hiders, as the title suggests, I am new to the world of thermal and am looking for information and advice. Here are my main questions:

1. I can't seem to find any sort of organized breakdown of what makes a magnified optic clip-on compatible, just that some are and some aren't. What is the criteria there?
2. What makes a thermal clip-on compatible? Are all thermals compatible as long as the magnified optic is compatible?
3. Being that a thermal scope is just a small screen, how does zeroing work? Do you turn off the reticle in the thermal and just use the magnified optic reticle? Do you have to re-zero through the thermal every time you put it on?
4. Being that you are aiming at a screen, does co-witnessing mount height matter as long as the optic is zeroed to the thermal screen image?
5. Are there magnification limits, upper and lower, and what are they based on?
6. Feel free to offer any unsolicited advice that may be helpful.

Thanks!

I've never worked up a load for a rifle that has a dedicated can on it. I'm wondering if there are any special concerns I should be aware of in the process. In the past I'd already worked up a load for this rifle that I was very happy with. For me when I was an SD under 7.0 that was great. Recently after putting the can on it I played with my new Garmin chrono and my numbers had blown up using the same recipe.

The rifle in question is a Ruger precision rifle in 338 Lapua with a YHM Bad Larry. I'm using Lapua brass, H1000, Fed GMM primers, and Fort Scott 250gr bullets.

Had Jay build this set about a year or so ago and they are absolutely spectacular. RPO optics, tubes are blem free and the specs are below. Testing the waters on these and can send photos of the spec sheets for serious buyers. Unit is in 99% condition, no scratches or external blemishes. Comes with (2x) Matbock Tarsier Eclipse. 9999$ Shipped and Insured. If interested a helmet set up/LA5B or peq15 can be bundled as well. Only trade would be a set of 31A (green phos is okay but will require cash on your side)


PC 2057/2176
EBI 0.8/0.8
LG 67794/61633
SN 35.7/36
Res 72/72
HALO 0.7/0.7

New Safariland Glock red dot RH holster with QLS. Molle fork also included.
7365RDS-8325-831

$225 $200 shipped.

Selling my excellent condition Aimpoint Comp M5 with barnd new Unity Mount.

New, Unity quick release magnifier mount also available

Aimpoint with Mount=$850, $750 $650 OBO
with magnifier mount=$900 $750!

6.5CM PRS Build:

- Foundation Genesis 2
- Impact 737R
- Stuteville Precision 24” M24 barrel
- KMW Mk-1 bottom metal
- Triggertech trigger
- Area 419 Hellfire Match Brake/collar
- NF ATACR 7-35 T3 FDE (C662)
- NF Xtreme Duty 1.54” 0 MOA Ultramount FDE (A696)
- Atlas BT47-LW17 Bipod (standard height)
- 2x AICS 308 10rd magazines.

Round count for entire build is 260 rounds, all factory Hornady 140G ELD-M's. NF scope is flawless & comes with original factory box (scope/mount purchased from Horta).

I am willing to part out the rifle and scope separately.

$6,500 OBO. I’m selling due to getting out of the PRS game. Thank you!

Selling my used Glock 45 MOS with B&T's Aimpoint ACRO plate (best plate made for the ACRO). Comes with all original equipment, and 2- 17 round and one OEM extended magazine, Glock Performance and OEM trigger.
Also has an Agency Arms stippled back strap.

TTI fiber optic iron sight.

Approximately 500 rounds fired, looking to get a Staccato HD.

Asking $600 shipped (to FFL) OBO

After 5 years of silence- no not silence open mockery and pathological lies now the “experts agree” that there is new syndromes linked directly to the WhuFlu death vax - heart breaking blood and “turbo” cancers .
People here and in my meat space real life have rolled their eyes when I use the word genocide to describe what WhuFlu and especially the vax was - now the fucking “experts “ say maybe 25-30 million people may have been affected by their experimental poison. More like 100-150 million you evil mother fuckers.

Feet first into the wood chipper with a lunch break at about the knees is the only remedy

Hawke Airmax 30 SF Compact 3-16x44 AMX IR Reticle MIL turrets(Model# 13210)

$SOLD Shipped

PayPal Accepted

I have an idea bouncing around in my head and wanted to get a few opinions.

My favorite rig is based on a 12.5" Criterion Hybrid barrel. Next to my "precision" rig, it's my most accurate setup. It almost seems like it goes on autopilot everytime I squeeze the trigger.

Anyway, I've never been wild about shooting suppressed, but last weekend, I got to shoot a rig with a Cobalt Kinetics suppressor on it and now, I can't get it out of my head.

What I want to do is get the direct thread model (it has an extra baffle in it), which is made of titanium and pin and weld it to my 12.5 to make 16".

Is this a mistake? When I shoot the barrel out, how ugly is it going to be removing the suppressor to put it on another barrel? I've pinned, welded and removed a lot of muzzle devices, but never a suppressor.

Hey all,

I have an Atlas V8 BT-10 NC Bipod for sale. It is in excellent shape with only minor scuffing on the bottom of the rubber feet and a few flecks of grey on some of the knurling.

$150 shipped

Vortex Viper PST gen2 5-25x50 FFP
Illuminated EBR-7C reticle MIL
Vortex Pro rings
$660 shipped to the lower 48.

Can send more pics if needed. Scope is in good shape.

I do not have the box or any other accessories

Remington 700 LA 30-06 Lightweight Hunting Rifle Project w/ NX8 2.5-20X50

I say lightweight, but I'm not counting oz's. Just in general terms of my objective.

Have a set of NF Ultralight 4 screw .885" rings I was planning on using but open to suggestions.

Looking at:

Near Precision 40 MOA
Seekins 20 MOA
Farrell FG force 20 MOA

Looking at these three cause of the integral recoil lug.

Probably don't need a 20+ MOA rail for the application, but figure I'd just get it. Never know what this rifle might become down the road.

In the same vein probably worth it to re drill and tap for the #8 screws?

Vortex Venom 3-15x44 with the EBR-7C MRAD reticle. Mounted in 34 mm Leupold QRW-2 medium rings.

Never dropped or banged around. No scratches on glass. 60 rounds of 6.5 CM w/ brake underneath it. Sold the gun it was meant for, no longer needing something of this spec.

$300 (Venmo preferred), buyer pays shipping from Chattanooga, TN. I'm not willing to separate optic and rings. I have sold three firearms and multiple parts on SH and have never had an unhappy recipient.

Happy to answer any questions. Thanks!

Mounted and shot at the range one time. Purchased from CS about six months ago. One of the first 8-40 2x 10mil turrets, non locking elevation. Flip up lenses and mk machine level. ZCO has upped their prices. I have had it wrapped since I got it.

Asking 4400 shipped.

Hate to sell but need money for a new truck. Will trade straight up for a 2024 King Ranch F450

Hey guys gonna sell my TT525P. Gen3xr reticle. Good condition with the scope chap. $3,500 shipped. Have the box and all the accessories that came with it.

From left to right, all are 5/8x24 threads and are .30 Cal all prices include shipping.

Area 419 Hellfire SOLD
Precision Armament HyperTap SOLD
APA Fat Bastard Gen2 SOLD
ParTech Hammerhead $125 (requires crush washer or shims for timing)

Thanks for looking. I know it's a Longshot. I have a 26" PRC barrel on an origin action that Spartan Marc made me before he moved. it's a legit 1/2MOA shooter with factory eldx and has killed a number of nice pigs.

I also have a 22" proof solus prefit that i'm not shooting.

I'd like to trade either for a carbon 6.5prc at 20 or 22". Only interested in shouldered barrells.

Pics below of the assembled spartan as well as the dismounted creed barrel.

Looking for a foundation revelation (light) for a lone peak short action. Color does not matter.

LS Wild is building our inventory beyond our own products. I am working with Marshall at Preferred Barrel Blanks for a group buy.

They are setting up to drill 6mm next week so I am going to open up a group buy tomorrow and add barrels you all want. The lead time will be cut down.

Comment with the specs for shouldered chambered prefits. I will add any prefit to the store if I can sell at least three of the same barrel.

List action, chamber, contour, threading, flutes, etc. that you want.

I will set up a Sniper’s Hide group buy page, but here is the page I set up for Rockslide.

Long shot hawk spotting scope camera. Used it twice and works great I just upgraded to the 1000yd cameras
$225 shipped

Full Power Wilcox Raid Xe with ERGOCTO 3-button switch - Red Laser

$3800 shipped CONUS UPS insured

Manners TCS in very good condition, I tried to take a picture of every defect I could but there’s not many. Just a few normal small blemishes. Has DBM Mini Chassis, Sikes clutch kit, PRS TCS Max rail with 2 weights and a few flush cups. Rem 700 SA. I had an Impact NBK in it.

$1350 shipped. Not looking for any trades.

Very Lightly Used Sig Sauer Cross Rifle in 6.5 Creedmoor 18 Inch Threaded Barrl in the First Lite Cipher Camo Finish .....Comes in the Factory Box with Lock but seem to have misplace the Paperwork/Owners Man. ..... 1 - 5rd Pmag Folding Stock ...Gun Has Less than 100rds Fired and is a solid .75 MOA Gun with The Standard load of 4350 and 140 eld.........SPF Shipped My FFL to Yours ........

All Items are up for grabs. First person to claim item on the post takes it. All items are shipped lower 48

Leupold Field Clamp - $40 SOLD
(3) Plastic AICS Mags (1 MDT 10 Rnd & 2 Magpul 10 Rnd) - $75SOLD
(3) MDT Metal 12 Round BR/Dasher Mags - $150 SOLD
34MM Vortex Cantilever Mount 1.4355" Tall - $75.00
New Out of the Box 36MM Area 419 Rings 32mm Tall (1.25") - $200.00
Used 36MM Hawkins Rings w. Diving Board 1.15" Tall - $150.00
Sphur 6601 - $200.00 SOLD