From left to right, all are 5/8x24 threads and are .30 Cal all prices include shipping.

Area 419 Hellfire SOLD
Precision Armament HyperTap SOLD
APA Fat Bastard Gen2 SOLD
ParTech Hammerhead $125 (requires crush washer or shims for timing)

Thanks for looking. I know it's a Longshot. I have a 26" PRC barrel on an origin action that Spartan Marc made me before he moved. it's a legit 1/2MOA shooter with factory eldx and has killed a number of nice pigs.

I also have a 22" proof solus prefit that i'm not shooting.

I'd like to trade either for a carbon 6.5prc at 20 or 22". Only interested in shouldered barrells.

Pics below of the assembled spartan as well as the dismounted creed barrel.

Looking for a foundation revelation (light) for a lone peak short action. Color does not matter.

LS Wild is building our inventory beyond our own products. I am working with Marshall at Preferred Barrel Blanks for a group buy.

They are setting up to drill 6mm next week so I am going to open up a group buy tomorrow and add barrels you all want. The lead time will be cut down.

Comment with the specs for shouldered chambered prefits. I will add any prefit to the store if I can sell at least three of the same barrel.

List action, chamber, contour, threading, flutes, etc. that you want.

I will set up a Sniper’s Hide group buy page, but here is the page I set up for Rockslide.

Long shot hawk spotting scope camera. Used it twice and works great I just upgraded to the 1000yd cameras
$225 shipped

Full Power Wilcox Raid Xe with ERGOCTO 3-button switch - Red Laser

$3800 shipped CONUS UPS insured

Manners TCS in very good condition, I tried to take a picture of every defect I could but there’s not many. Just a few normal small blemishes. Has DBM Mini Chassis, Sikes clutch kit, PRS TCS Max rail with 2 weights and a few flush cups. Rem 700 SA. I had an Impact NBK in it.

$1350 shipped. Not looking for any trades.

Very Lightly Used Sig Sauer Cross Rifle in 6.5 Creedmoor 18 Inch Threaded Barrl in the First Lite Cipher Camo Finish .....Comes in the Factory Box with Lock but seem to have misplace the Paperwork/Owners Man. ..... 1 - 5rd Pmag Folding Stock ...Gun Has Less than 100rds Fired and is a solid .75 MOA Gun with The Standard load of 4350 and 140 eld.........SPF Shipped My FFL to Yours ........

All Items are up for grabs. First person to claim item on the post takes it. All items are shipped lower 48

Leupold Field Clamp - $40 SOLD
(3) Plastic AICS Mags (1 MDT 10 Rnd & 2 Magpul 10 Rnd) - $75SOLD
(3) MDT Metal 12 Round BR/Dasher Mags - $150 SOLD
34MM Vortex Cantilever Mount 1.4355" Tall - $75.00
New Out of the Box 36MM Area 419 Rings 32mm Tall (1.25") - $200.00
Used 36MM Hawkins Rings w. Diving Board 1.15" Tall - $150.00
Sphur 6601 - $200.00 SOLD

Looking for feedback, etc. reference a new rifle case for the ATX with folder. Getting a longer barrel/different caliber spun up which means it won't fit into what I currently have. 26" with 419 HFM, be right at 41 +/- 1/2"
I do know the AIM has two versions, I would use the "right side" folding version of course. The Triad while not intended for a folder appears it can accommodate one, especially the right side folder. Plus the Triad is US made.

Anyhow--Anyone have the Triad version and can comment? Or have other ideas-no hard cases. Just a simple case that I will have and last.

Who would win?

Anyone know of good holster maker in the Richmond Va area. I know the guys at TTI/Rapture Tactical will do it but lookingto see if there is other options. If there is a online site you have used let me know. This is my setup for a holter.....HK VP9L align tactical thumb rest, tlr-1h and holoson optic.

ATS Tuner 5/8-24.

$135 shipped

PayPal F&F

Mpa DN5 6.5 5/8 -24

$125 shipped
PayPal F&F

New in box, red anodized 36mm, 1.27" height, 0 MOA cant. $200 shipped.

Also consider trades for berger 6mm 105 or 109 hybrids or 108 elite hunter bullets or one piece area 419 35mm mount

Proof research carbon fiber AR10 6.5CM barrel for sale. Never fired, but was assembled into a build at one time. Comes with Proof Research Rifle length +2 gas tube. Looking to get $500 obo shipped. Thanks.

Midwest Industries reaction rod for sale. Used a few times. Looking to get $100 obo shipped.

I have up for trade a Barrett MRAD in FDE. It currently has the 300prc barrel kit on it with exactly 192 rounds through it. I also have a brand new 300nm barrel kit with zero rounds through it. Have 3 delta mags with it and 2 bravo mags. Atlas PSR bipod and atlas rear monopod. Also will include the Barrett bore guide and the fixit sticks Barrett tool kit. Rifle is a 9.5 out of 10. Can include the Leupold mk5 7-32x56 with the Spuhr mount and diving board for the right trade offer. I am looking for a high end 6mm PRS setup. This rifle is producing .5 MOA groups currently with the 300prc barrel. I can send more pics to serious buyers. Prefer North Carolina trades but will consider out of state transfers. Trade value is msrp for msrp so 7300 including everything but scope. 9800 with scope and mount.

Sig Sauer SSG-3000 chambered in 7.62x51, McMillan Tactical Stock, and Sig Sauer case. Comes with 2x Factory Sig 5rd mags, 3x 10rd Accurate Mag branded mags (2 of which are not pictured as they're still NIB). Does NOT include the NF ATACR, however I'd be happy to sell it alongside the rifle if I get a decent offer on it. This is an earlier import model SSG-3000, from before SIG USA's started production with the shoddy plastic stocks. It's not quite clone correct for a "Behind Enemy Lines" build, but it's the closest you will get with a pic rail. I am the original owner, and have shot around 300 rounds of M118LR through the barrel.

Please keep in mind that this rifle was not a safe queen, minor cosmetic blemishes on the stock and along the barrel are to be expected. If you're picky about that kinda thing, let me know and I'd be happy to take more detailed photos of said blemishes for you.

Looking to get $2900 OBO, asking price also includes free shipping/insurance to your FFL.

This rifle is also crossposted to tacswap, just in case you see it over there as well.

Basically brand new. Fired one and a half boxes (30 rounds) through it. It is a tac driver.

7.5 twist
24” length

Purchased a 300 Wsm CF barrel so don’t need two magnum barrels anymore.

$875 shipped (does not include the muzzle brake)

Clearing off the bench
Nothing insane, just a couple bags of brass lying around
23- Hornady
9- Norma
28- Nosler

All factory ammo, 1x fired with no prep done
25 shipped

Trump didn’t even make it 100 days and here comes SARS COVID part deux




“Leading doctors have reacted to the emergence of a new coronavirus, calling its spread to humans an 'eventuality.'

In scenes eerily reminiscent of the beginnings of Covid, researchers at the infamous Wuhan Institute of Virology in China recently detected the modified strain living within bats.

HKU5-CoV-2 is strikingly similar to the pandemic virus, sparking fears that history could repeat itself just two years after the worst was declared over.”

Good condition trigger, wide curve shoe, rh, no release.. spf

1. Like new PMM cowgirl for 35mm badger C1 (Aimpoint T1 footprint) 70 tyd,

2. Surefire 500lm eb2 head 75 tyd

3. SF sr07 50 tyd

4. SF sr07 with tail cap gone

5. Badger pic Harris mount 50 tyd

6. Arisaka CTR stock angle adapter (not the lite) with SL enhanced buttpad 70 tyd

7. NF ultralite 6screw .885 30mm rings 100tyd

8. LMT MWS factory 13.5 308 barrel with BRT tube around 50rnds on it, I had picked it up for the extension but never spun a new barrel on (keeping the griffin brake) 300 tyd. If you want to package it with a 13" MLOK upper let me know we can probably work something out so I can get a 15".

Zelle/venmo and trades welcome just slide in my PMs