Selling 2 AI AW mags with the HRD kits. I do not have the original followers and I won't sell the kits separate. What you see it what you get.

240 shipped firm for the pair. Payment only by Venmo gift or zelle only. My PP is locked.

No trades

Whidden full length bushing 6.5 CM sizing die $100 shipped

What's a good neck/shoulder bushing and expander mandrel size combo for the SAC modular sizing die for 6.5cm? Im thinking 286 for the bushing and 262 for the mandrel? I got the 283 (which is technically for 25cm) and 261 for the expander mandrel. I watched and followed Gregs (from primal rights) video on how to determine what bushing and expander mandrel sizes to get and now when sizing my brass the shoulder will bump the 2 thou i want but is only sizing the top 2/3rds of the neck so now I've got to find another combo that works correctly. I set up the die using their YouTube instructional video and i also asked sac if this combo was ok for 6.5cm before getting them and they said yes but obviously it's not working out so well. so now I need some help to find a combo that sizes my cases correctly and effectively. My brass has 13.5 neck wall thickness, which is why I chose 283 to get me about 5 thou squeeze to then open back up with 261 (a little over 3 thou after spring back)
Thanks

Whidden 6 Dasher Die Set , sizing die is full length and is a bushing die. $200 shipped

Who here has had luck on a 22 arc build and what was your recipe? I tried to cheap out against my better judgement with a ballistic advantage 18” fluted barrel and brownells type 2 bolt.
After break in, I tried 3 different ammo types, 3 suppressors and bare muzzle, gas shut off and two scopes. The best 5 shot group I’ve had was .8”@100 yards and that wasn’t repeatable. Average group size was 3” with mostly vertical stringing. These groups were shot after letting the barrel cool to ambient temperature.
At the same time, I was alternating with shooting my 6.5 cm gas gun that had an average group size of .8” with 4 different types of ammo, so I don’t believe that this is a shooter issue.
Attached is a pic of a representative group from the arc build.

Le Wilson FLD-FLD-6DASH full length bushing sizing die with .266 bushing for 6 Dasher. $100 shipped

nib XLR Envy Pro, Short Action, in Tequila Sunrise, folder, C-6 stock, ergo grip, bag ryder, thumb rest.

$950 shipped

Zelle, Venmo, USPS MO or Bank Draft
No Trades Please

21st Century Mandrel die and mandrels

E21
E24
.2230
.2410

$100 shipped

Looking at upgrading my element theos to some alpha level glass.

I’m interested in either the ZCO 5-27 or the March high master 5-42. Also debating the ZCO 8-40, but it’s gigantic and I don’t shoot ELR. March is more compact so the extra magnification is just a bonus.

I’d be looking at the MPCT1 or FML3 reticles. I don’t find any use for a tree…

No experience with anything ZCO. I did have a 4.5-28x high master at one point and the glass very nice for its size.

Anyone have experience comparing the ZCO offerings to the updated March high masters with shuriken turrets?

3 SAC Loc Rings $50 shipped

Both in like-new condition. ERA-TAC has been put on a rifle (never fired); AI is never mounted.

ERA-TAC: 1.73" height; 34mm rings; 20 MOA built-in cant.
$Sold

AI: 1.32"; 34mm rings, 18 MOA built-in cant.
$150


ERA-TAC:



AI:

Redding Neck Sizing Bushings $125 for all shipped

265
267
268
269
270
271
288
289
290
292
293

Redding 11601 shell holder set $50 shipped

How many of you use Bergara BMP and do they have tuning for itOpinion?

Once fired (fire formed) 223AI Lapua brass 381 total. $400 shipped

223AI Redding Dies $175 shipped includes what is in the picture plus a 245 bushing.

Hello,
Getting back into shooting after being away for decades.. hope to learn from everyone here..
I shoot a bergara B14, HMR, 308 and should be getting another bergara b14 ridge SP 223 tomorrow..

Hey guys I have a nice compass lake upper that is very accurate. I have a 4-16 atacr in the highest tier one mount and an xlr tr2 stock/buffer tube set as low as possible and I have to really smash my face down to get decent eye relief and even then it’s not vey good. I would love to make this setup work but I think the only way is a higher mount which I’m not sure exists. Open to other stock suggestions as well. Thanks

Manners TCS in High Plains.
Comes with SAP 2 rounder and cheek pad. I have all the weights it came with.

THIS IS BEDDED FOR AN IMPACT
Short action. Crescent Customs did the work.
Inlet let for M5 Hawkins Hunter .
M5 Pure precision would not fit with a little work so I didn’t try.

$1450 shipped

New I took it out to test fit in a stock and the stock was cut for Hawkins hunter.
$85 shipped with screws.

Kahles K624i CC 6-24x56 Abs. MSR
Part # 10540
Perfect condition, glass is like new
Illuminated reticle

Had this in a safe for a while and would like to sell to fund other stuff.

Comes with:
Badger Ordnance Rings 306-14
Aadmount Objective and Eyepiece caps
MKM throw lever
Sun Shade
$1700 1500

Selling a rare and discontinued Spuhr 4003B. This mount features the same specs as the popular 4002 (1.5" height, 34mm rings, 0moa cant) but has a wider spacing between the rings. It looks great on larger scopes, like an ATACR 7-35. The mount will come as shown.

SOLD

No trades please.

Selling x5 total 2011 mags. The package includes x2 20 round MDX mags, x2 20 round Staccato mags with TTI baseplates and x1 Springfield 20 round mag. Will sell individually for higher prices. Will not ship to ban states. Know your local laws before inquiring.

sold

No trades please.

Hey Hiders,
I have 2 seekonk wrenches for sale. One is 65in/lbs and one is 15in/lbs. I have had them stored away and have not used them more than a handful of times. They are in like new condition.

I’m asking for $60 a piece shipped or $110 for the pair shipped. I accept PayPal or Venmo.

Thanks.