WTS Used Lee Breech Lock Challenger Press and accessories

Items Included
Lee Breach Lock Challenger Press w/ roller grip conversion
Inline fabrication Case Ejector System (Kicker arm and Ramp) [Ramp not in photo]
Inline Fabrication Side bin System mounting plate w/ 2 side bins
Primer Catcher tube and Cap
Large and Small Primer Cups
Lee Shell Holders #2 (2ea), #4, #19
2x Lee Smart Lock Bushings
13x Steel Breech Lock Bushings

Selling as a complete package. Will not separate.

$150

Shipping included to Lower 48 state

Accept Check, Paypall, Zelle

I have for sale a like new matrix pro 2 for short action rem 700/clones. This chassis is ambidextrous so can be used with a right or left handed receiver.

I have used it for less than 100 rounds and it has no wear at all. It has an anodized coating and it is very unique. No one will accidentally grab this from the shooting line thinking it's theirs!

Comes with grey ops internal weight kit that adds 30oz and also it has (2) of the grey ops aluminum rails. Not included in the picture. Also will come with action screws.

Please ask if you have any questions about the chassis.

Selling for $1600 shipped

Thanks!
Ben

636-297-5055 for fastest response

100% off cert for a thunderbeast. Will send full picture after payment $1000

Looking for a Tangent theta 7x35 Tremor 3. would consider 3xr fine or same reticles in a 5x25.

Vortex Radian Ball Head TRH-BAL1 Color: Black, Attachment Type: Arca

Specifications​

Specifications for Vortex Radian Ball Head:​

Features​

Features of Vortex Radian Ball Head:​

• Arca-swiss head mount, independent pan movement and tension control
• Integrated level
• 45 degrees of tilt, notches for up to 90 degrees, quick release system, and counterweight hook

$190.00 shipped

Hey all,

I have a like new Nightforce Ultramount A699 for sale.

1.540" Height
30mm
0 MOA
Black

$225 Shipped

Thank you!

This .223 Match build is geared towards PRS but would be right at home in F-Class.

Origin SA, Competition Bolt
Proof Competition, TL3 (HLR Lug) @ 26"
M5 Bottom Metal
Triggertech Diamond, Flat
Custom Maple Stock
DNT 7-35x56 Mil
$3000, shipped to FFL
$2600 w/out optic and rings

(Accutac bipod not included)


100 yard sight in with 80.5gr Berger over 23.7gr of AR-COMP @ 2931fps

3-shot group on steel at 500, ~0.1mil group (pardon the cell phone picture through the scope, not easy to get a clear image)

Does the process (how it is chambered/Crowned) dictate how a good lot of ammo performs? and I am speaking using quality match ammo(Lapua, Eley, RWS, Norma Match)

Was really wanting to give NRL hunter a run this year but can’t make it work with my schedule. These were for a future build. All are brand new (all sold).

50% off cert for Thunderbeast. Will send you full picture of cert after payment. $SOLD

Have an Gen 3 Fat Bastard for sale.

$130

Looking for an ace brake if you got one.

I'm trying to lighten up the range bag and clearing out the stuff I don't use. This is a lightly used barrel cooler. It will come with extra intake filters. Merry Christmas.

$45 shipped

I accept PayPal (if the buyer wants to use G&S to they must cover fees), Venmo, postal money order is accepted also but the buyer will have to be patient.


Please refrain from using "I'll take it" as it triggers scammer activity, and use "pm sent" for time stamp.

Just had a friend last night bring up the Jan 6 captiol riots. He looked at me funny when I laughed and said "ya riots" while making air quotes. He tells me, I seemed to remeber two police officers with beatin to death. Then he tried doing the you're a crazy conspiracy theorist thing to me when I told him they did not.

Can someone PM me a phone number for Mighty Armory? I placed an order two days ago and my computer auto populated the incorrect shipping address. I didn't realize it until I received the invoice via email. Directions in the email say to reply with any question or concerns. I replied to the email explaining the situation, I filled out the form in the "Contact us" section, again explaining the error, and I started a chat in their system with the same information. I haven't received any communication from them. Thank you kindly in advance.

XLR steel side weights with grip tape $160 TYD
2 3/4” steel nose extension $SOLD
PP F&F or Venmo

Hi all,

Picked up some boxes of what I thought I would never get, Sako TRG Precision, 338 Lapua, 300gr SMKs. My 42 loved them beyond reason printing .488 moa 5 shot groups at 100m and just over 3.65” at 1000m.

My question is, what powder did they use? I’m confident they used a VV powder (ie, N570) but neither Sako nor Beretta will respond to my emails or phone calls regarding their load data since they’ve apparently discontinued that line, they have it for every other caliber in the long action/magum that they offer 300 winnie and 9.3mm on the site.

Anyone got some insight on this? Or should I just work with N570 and see what it does? Would love to make these rounds myself instead of the $10/rd I paid and trying to find the ammo.

Thank you

Dudes, brand new to all this stuff. Trying to figure out the 9000 different reticles and how/when do you want one over the other. Not to mention dialing versus Christmas tree reticles. I have a couple specific questions and a bunch more that I don't even know how to ask yet. So feel free to read my mind and educate me. LOL

When do you prefer to dial versus a Christmas tree? Where is this purely personal preference?

Are there times when you want to scope with both options or do you pick a scope that just offers your favorite?

Is it way better to have a caliber specific reticle so all the holdovers are perfect and line up with the correct distances?

Is a standard Christmas tree style in Mills used primarily just to dial?

There's so much to this. I almost don't even know where to start. What do l need to know?

Hey guys, l got a buddy who's into LR stuff and is always bugging me to go shoot with him. I've had plenty of shooting exp but never stretched it out before. I have a couple of very basic questions.

When you're running a big decked out scope that you can hold off or dial, does the caliber really matter that much? Is drop basically irrelevant and BC the basic consideration?

I have a Ruger Mark ll M77 in 7 mag and a Rem 700 30-06 that I'm not doing anything else with. I could also buy a 6.5 Creedmoor. Will either of the three calibers really be drastically different with the right scope setup?

I have a 5-27 MPCT2 scope that lives in my safe on my 6GT that I am looking to trade with "obvious" money on my end for two other scopes.

Either
5-25 ATACR ( Mil C)
5-25 Kahles SKMR ( 1,3 or 4 )
5-25 Minox (MR4)
Or possibly
6-36 Gen 3 Razor

I will try and post some updated pics of it after work tomorrow. This was from the last time it was out of the safe earlier this spring.

I previously shared my immense amusement since moving into the new house of listening to the Horned Owls in the woods behind me (https://www.snipershide.com/shooting/threads/im-a-big-fan-of-owls-personally.7231649/) and also sought out the collective's opinion on a toad (https://www.snipershide.com/shootin...ians-ive-got-a-question-about-a-toad.7232563/) .

Tonight was another first since living here and the topic of discussion is...



Yep- that's right we're talking coyotes. I've long suspected that they were in the area but tonight is the 1st night I've heard them and holy smokes- they're making up for lost time. It sounds like there must be at least a half dozen of 'em but I'm 100% certain they're coyotes. I may be using the wrong terminology but they aren't 'howling' but rather just 'yipping' and freaking the fuck out as they do, it sounds like a whole section of the mountain is covered by them. Here's a quick clip that's dang near a perfect match of what I've been hearing off and on tonight...

Login to view embedded media
I've encountered a few coyotes in the woods over the years here in PA but dang if this isn't the 1st time that the whole other side of the mountain (a couple hundred yards by my estimate) seems to be a literal Disney World for 'em.

Not sure if anyone else has had this happen by their house but my neighbor usually leaves his dog outside and he was going absolutely nuts barking at them. The coyotes were so vocal that I went over to knock on the neighbor's door for the 1st time, not because I was angry about their dog barking (although I wasn't thrilled with that either to be honest) but to ask them if they heard the coyotes (which couldn't have been far from the dog) going nuts and that I was concerned for their dog. We went out back and the neighbor said that he honestly couldn't tell the difference between other dogs and coyotes and once he heard all of the commotion and found out what they were, he thanked me and his dog became an indoor dog (at least for tonight).

This may be common hat to some here- but (as I said) this is new to me, at least in this quantity. What I find to be... IDK just strange about it all is how the coyotes can go absolutely nuts for several minutes and then... nothing. They just seem to go radio silent immediately. I give up waiting outside to listen to them and get back to doing something else and another 40 minutes or so later, I hear them again just going absolutely crazy and then... back to silence.

Is this normal coyote behavior?

-LD

Any Warhammer nerds here? Not just the books/videos but the tabletop game also? I’m not…yet, but I can feel myself being pulled into it. I’ve read a few of the Black Library publishing books years ago but never really gave it much more of a chance. I’ve watched the Astartes clips on YouTube like a million times and the new Amazon episode is pretty awesome. I can see myself reading tons of the books and any videos they put out but I’m intrigued by the table game as well. I think painting your own pieces and reading the lore from the source could be really cool too.

This video is amazing and not just because it was done by one superfan over several years. It stands on its own. I love the whole thing but I can’t stop watching the fight scene starting at 3:50. Its some of the hardest shit ever

Login to view embedded media

Stock is off of a brand new Tikka T3X CTR.223 I just picked up. Never shot the rifle or even had it out of my house with this stock on it. Includes 5 round mag and bottom metal (plastic). $65 shipped.

Thanks,
Matt

I have 46 rounds of 50BMG ammo for sale that’s just been in dry storage for the last 10-15 years and I don’t anticipate I’ll own a rifle anytime soon. I’m basically selling the exotic rounds for market pricing ($100 a round), $3 a round for everything else, and $30 to ship. Yes it’s all legit, I’ll gladly return your money if you x-ray the Raofauss rounds and they are fake, but I guarantee they are legit. Before you get all hot and bothered by the price, please look up the SLAP round and the Raofauss.

$750 shipped for all, I won’t ship to restricted states. I’d rather not split and just sell it all. My wife tells me she wants a new house so this is just going to a down payment so help a guy out here.

Silver tip x19 M8 API
Red over aluminum x4 M20 APIT
Burgundy x5 M17 Tracer
FMJ x2 M33 Ball
Black tip x5 M2 AP
Green over silver x5 Raofauss MK211 Mod0 (HXP89 headstamp)
M903 SLAP x1 (WCC91 headstamp)

PayPal F&F preferred, may work something else out. Please PM me first to prevent scammers. I have tons of feedback on here but more than welcome to video chat, text, talk etc.

Thank you!

Standard RCBS dies (full length) and an RCBS Matchmaster die for 300 RUM. Changed the rifle to a 300 PRC I so have no use for these any longer. $60 for both, shipped. Or, $35 for the standard dies, shipped. And, $50 for the Matchmaster die, shipped.