I came across this website and was wondering if anyone else has bought from them?

Obama Depression

JK

Thinking to get another bolt action for my new rifle, most likely would be Short Action, but I am only to Long Action with just 308 and magnum bolts.

Have used Definance Ruckus, Terminus Zeus. Thinking between Impact 737R, Falkor 7even, Lone Peak Fusion and BAT Hammerhead or anything you would like to compare with these.

I would only use it for casual F class style long range competition shooting and some PRS local match, so bolt lift angle wouldn't matter unless it touches scope. Barrel would be cut by gunsmith instead of prefit.

Would like to get some end user experience in terms of bolt smoothness/cycling, easiness to tune(trigger timing if uses hanger) and any issue/improvements these action could have.

Any input would be really appreciated to help me make my decision.

Two brand new unchambered barrels for sale.

#1 Brux #5 contour 6mm/.243 8 twist shank 1.20 SOLD

#2 Ace rem varmint contour 22cal/.224 7 twist shank 1.20

$350 each shipped to your door

Would trade for 25 cal barrel blank or heavier contours.

Apparently DJT wants to buy Greenland?

Hello, some real practical advantage to prefere SAC insert instead Hornady's?

Regards

This is my custom AR-15 in 5.56. Ambidextrous side charging upper, custom red Cerakote, YHM suppressor brake, Anderson AM-15 multi lower, 16 inch 1:7 barrel, 6 position stock, magpul grip and magazine, and M-Lok full length picatinny handguard. Test fired only, runs 100%. Post-Christmas, must pay bills, sale...$750 shipped priority mail to your FFL.

Looking for a Bighorn TL3 SA any bolt face. Would love to find another right hand left eject but would take right/right.

I have a 7-300 prc annd 7 saum arc shouldered barrel for American rifle company actions. It was on an Archimedes but same headspace for all actions (magnum so should work with Cdg as well).

All prices are shipped in lower 48, extra insurance on buyer’s option/cost. Only accept PayPal ff or USPS money orders.

7-300 prc Barrel is 24” threaded 5/8-24, light Palma patriot valley osprey barrel works 1:8. It has 50 rounds on it, all rounds where using either n165 or n170. It is in a krg bravo long action stock that is sako green. Bravo would come with standard cheek piece/buttpad not oversold/toolless lop version. Front plastic had to be relieved slightly to allow elite iron bipod to lock in. Brass is lapua 150 new 50 once fired. Redding fl bushing sizer and seater with 7mm micrometer stem.

Second barrel is 7 saum pva 22”, marksman contour, 5/8-24 threaded. Reloading components not included. Less than 100 rounds. Painted with Aluma Hyde.

Action: Sold
All 7-300 items (barrel, brass, dies): sold

Split (reloading components only after barrel goes):
7-300 prc barrel: sold
Saum barrel: sold
Stock: 300
7-300 prc Brass: sold
7-300 prc Dies: sold
Trigger: 175
Second magnum bolt head: Sold

printed chamber blocks available in aics, ar15, sr25 and glock pcc. keeps the bolt from closing on a chamber and the sr25 model features a bolt catch
$20 shipped.
Aics short action single shot sled available in black $20 shipped

New 18" DD S2W barrel. Rifle gas. Dead Air nomad can.

24.5 varget with 77smk seated at 2.26

Avg 2635 fps with a SD of 9.5.

Shoots great, .5" 5 shot at 100 yards but seems like I should have been around 2700-2725 with this charge.

Am I crazy?

The Brass Marker is a great way to mark and keep track of your brass, available in 308,223 and 300win case sizes, uses a standard sharpie. $15 shipped

The Powder Cup Kit is a great option for those tired of losing powder due to small cups and kernels bouncing. It holds just over 800grains of powder and features spouts on either side of the cup.
compatible with auto Trickler gen3/4 or gen3 with ingenuity upgrade. please specify when ordering. kit includes Cup, Handle and Guide with double sided tape
1.940” tall ingenuity upgrade 1.8” tall, weighs 528grains. $35 shipped

Reloading trays featuring a bullet tray available in: 223,308,magnum,338lapua, 50bmg, 357mag,10mm and others dm for more info, 25$ shipped for 50rd and $30 shipped for 100rd

lastly the shellholder tray is a simple way to hold 12 shell holders. $15 shipped

He's saving the lives of murderers of course.



No democrat on earth cares more about the victims of crime than they care about the felons. They are literally the hands of evil.

$1750 shipped for scope only. This is Lones Wigger's Unertl 24x scope. It has excellent optics. Some exterior wear, a small dent in the objective which doesn't affect performance. A great piece of shooting history that is still eminently usable. I purchased this from the USA Shooting auction to support the Lones Wigger Youth Program Endowment. The scope is 24x with a fine crosshair and 1/8 minute dot. Scope and rifle for sale together for $3500, the rifle was a gift from Herb Hollister to Lones Wigger. This is the rifle that Herb was holding on the cover of The American Rifleman.

Winchester Model 52E custom .22 LR. Serial E123255 has been fitted with a 28-inch Douglas stainless steel barrel (1.140-inch muzzle diameter, recessed crown). The action has been fitted with an aperture base and the safety has been removed. The aftermarket stock is a broad laminate with forend accessory rail and adjustable comb (can be raised approximately .25-inch, spacers are absent). OPTIC: A Unertl 24x scope (serial 19961) with adjustable objective and dot reticle is mounted on barrel blocks.

Per the Wigger estate, this rifle was gifted to Lones Wigger by his good friend Herb Hollister and is the same rifle pictured with Hollister on the cover of the October, 1983 issue of American Rifleman. I'll include a copy of all documents with the purchase of only the scope or all the original documents and an original issue of The American Rifleman shown if the scope and rifle are bought together.

wigger unertl 5.jpg (32.54 KiB) Viewed 17 times

We received four A4s last week, three rifles and one pistol. They all sold withing 24 hours of hitting the store and I bought one of the rifles as I am a hopeless HK fan and I freely admit it.

All I have done with the rifle is take it to the range and zero the optics and then shoot some at 100 yards. So the comments about the rifle, it feels at least a pound lighter than the MR556 and I think a lot of this is the thinner barrel profile. The handguard is made by HK and is thinner then the previous mlok version and lighter, definitely lighter then the quad pic rail. The lower is now full ambi and functions as advertised. The trigger is actually the same full auto you get with the 416, just no sear. The furniture is changed, lighter then before. You no longer need the butt stock tool to take down the rifle, just normal pins like any other AR.

From the factory, HK test every rifle sold and they leave with the following. 10 shots, 100 meters, 30mm group. They do not say if they shoot it out of a sled (I am assuming they do) but it is sub moa rifle with factory ammo if you do your part. Having said that, I did not do my part over 10 rounds three times. On every single group (I tried three times) shooting Winchester Lake City 62 grain, I pulled at least once. If we had been shooting 8 shot groups it would have been sub moa. Even pulling some shots, my worst group was 1.2 moa at 100 yards and best was 1.12 moa.

After looking at it, I am going to try again over Christmas with a setup that I think will get better accuracy. I am going to bring a couple of different ammos including 77 grain IMI Razorcore and 77 grain Blackhills and I will scrounge around for a third group. I am going to put an actual bipod on the rifle instead of resting it on my backpack and bring a rear bag. I am also going to go with a better/higher magnification scope to see if I can reproduce the factory claimed accuracy. Since I am talking about accuracy, I am going to repeat what the HK rep told us about the barrel. It is a blank sent over from Germany. It is not chrome lined. HK says that they can not find anyone to chrome line the barrels to the standards required. To that end, they are also saying that the chrome content of the barrel steel is higher then most US made barrels and that they have multiples of rifles that are still shooting sub moa past 12k rounds. To me, that is almost besides the point because HK has gone full SOLGW on us and they guarantee the barrel in writing. If you shoot it out and the groups open up, they will replace the barrel for life of the gun.


MAC I think he does a good job showing the changes from the 556 to the A4
This is a video from 9holes, they take it to the range and give their thoughts.

I am outfitting a very lightweight hunting rifle that is threaded 1/2x28. I would like to buy the lightest suppressor available for this setup, and would not need to use it for anything greater than .30 caliber..

So far, the Silencerco Scythe Ti appears to be the best option at 7.3 oz., and I can change the titanium baseplate to 1/2x28. Is anyone aware of a lighter option? I have several Silencerco suppressors, and have been pleased with them.

Would also welcome any feedback on other options for extremely light suppressors.

Thanks in advance.

Thinking about parting ways with my spare vudoo 360.
I can sell this any way you'd like but this is how it sits right now. *Scope not for sale*

-Vudoo 360 22" bartlein 1.20 straight with ec tuner (not threaded 5/8-24 it's threaded directly for the tuner) if I had to guess it has 2-3000 rounds on it. 2 vudoo mags with dope followers and one brand new vudoo mag
-Bix n Andy trigger
-Mdt acc elite chassis (I'll be keeping the accessories off of the chassis) also have a foundation centurion I could put on it as well.

Was used for nrl so it does have some wear marks but nothing that effects it in any way. Now it just rides around in my case and gets used as a loaner every now and then.

2000 for barreled action
2250 for ba with trigger
3250 for drop your scope on and go.
Most forms of payment accepted I'm pretty easy to work with.

****Sold****

You all are a bunch of degenerates, some worst than others.

Thinning out the collection not that I'm not drinking anymore. Secondaries are way higher than I am asking. All sealed and unopened. Very hard to find allocated bottles from Buffalo Trace.

Weller C.Y.P.B. $450 shipped
Elmer T Lee. $ SOLD Shipped

Located in DFW metroplex. As title says looking to trade 8#'s of H1000 for 8's H4350.

If you haven't seen one of these, they're quite unique. It is an extremely compact optic which gives it some major advantages on a number of different platforms. This has Barely used. I tall Target tested this and the tracking was above 0.990 (meaning it's within the margin of error of testing to perfect). Scope is nearly perfect with the exception of small marks from the Accuracy First mounting location (just rear of the bell). $1100 Shipped CONUS.

No trades.

I bought all of these at the same time. They've never been used . . . I received them, checked the function and put them back in their plastic/boxes where they've remained. Most of them came from Battlehawk. One came from EDC Lifestyle.

This listing is for the Combat Troodon in Green, partially serrated. This one is no longer available from Microtech - $575 $550 $500 Shipped CONUS.

The First Two images are of the actual knife/box, the third is a stock image.

I bought all of these at the same time. They've never been used . . . I received them, checked the function and put them back in their plastic/boxes where they've remained. Most of them came from Battlehawk. One came from EDC Lifestyle. $350 $325 $300 Shipped

First up is the Direct Delta DE Black Tactical (First two Pictures are of actual knife/box. Third is stock image).

Unopened 8lb jug of h1000.

Located east of the twin cities ( eau Claire WI)

Will not ship

$400