There’s been quite a few discussion about neck tension, neck lube, and some discussion on primer weight sorting too and SD
I have no answers but just questions for the experts here.

Do you suppose that there is a good relationship between getting good SD and neck tension/lube has to do with whether a primer by itself causes enough pressure to dislodge the bullet from the case and enter the rifling? Or by how deep it enters?

Suppose a primer does not always dislodge bullet from the case depending on neck tension, neck crimp, and neck lube. So a lighter hold on the bullet from the neck would result is more likely to dislodge bullet with just the primer, and a stronger neck hold results in more unlikely to dislodge. Then wouldn’t it be a good assumption that a middle strength hold on the neck results in inconsistency in dislodging?

Wouldn’t this inconsistency cause the SD to be higher due to different combustion characteristics?

Then all this discussion around SD in relation to neck tension, lube, crimp, primer weights etc really are trying to find a combo that creates a consistent release?

If so, would a consistent strong neck grip that is stronger than the primer alone can dislodge be about as good as one that consistently allows the release? Or would one be preferable to another? Why?

Login to view embedded media

You get to see some great examples of how reticles, parallax, Side Focus, and glass clarity come into play in this video. It’s an extension of his other video that compared 36 different scopes. He calls them IPVOs.

Notice how some thick lines get in the way when using the tree for drop.

I have a brand new never used black foundation Samson. This has the centurion grip and is inlet for an impact 737r short action. It has all the weights that come with it from foundation.

Please ask if you have any questions about this awesome stock.

Selling for $1800 shipped

Payments accepted are PayPal, checks, or money order.

For fastest response please text me at 636-297-5055

Thanks!
Ben

Lightly used MDT CKYE-POD GEN2 SINGLE PULL STANDARD - BIPOD w/ BTC head. This is the head that works with both picatinny and ARCA.

I used this for two photoshoots, it has some very minor wear on the "holes" where the adjustments are and a bit of wear on the spikes. 100% functional.

Let me know if you need anymore photos.

$450 shipped. SOLD

SOLD” ARC 36mm (28mm Med) 1.10" M-Brace Scope Rings $
Price includes shipping to the lower 48. PayPal F&F for the form of payment.

New, never mounted Swarovski Z8i 1-8x24 with the 4A-IF reticle.

Tikka lighter weight build 284win hunting rifle. Right at 9lbs scoped with 5 round mag on my bathroom scale. Stainless tikka action, 5/8-24 threaded carbon6 carbon fiber barrel 1:8 24”, mdt tikka xm magazine bottom metal (ideal length for 284 win based rounds), McMillan carbon fiber game warden lr, area 419 pic rail in front, Sphur tikka dovetail hunter style one piece mount. Swept threaded bolt handle and dumbbell style knob. The stock also accepts ctr bottom metal. Asking $2100. My cost was a little more than $2750. I just tend to shoot my lone peak medium more in a similar set up.

Scope is not included.

NIB never mounted, Trijicon RCR 3.25 MOA.

Login to view embedded media
Yes, it's like that!

Sirhr

Great condition, came out of a rifle that I bought used. Will fit Remington 700 clones. No bolt release. $250 shipped

Has anyone used an OBW blank chambered for an AR-10?
What kind of performance did you see vs a bolt gun?

7PRCW EC2 (no turn neck) made by JGS Reamer for sale
I never used this reamer since I went with the Neck turn route.

200 Shipped

Nightforce ATACR C543 4-16x50, ZeroStop, Digillum, Mil-R Reticle with Tenebraex lens covers.

$1600 buys it

6.5 CM chambered by Altus shooting is available for sale

there are 2 small scratches on the chassis that is shown in the picture.
Specs:
Defiance Ruckus Tactical Medium action black Nitrided
Proof Research 6.5 7.5tw Sendero light contour (should be around 600 Rds down the barrel)
Area 419 Hellfire self timing brake (DLC is belmished)
Triggertech Primary Trigger flat shoe
MDT HNT26 Folding Arca

will include 50 pieces of new Peterson srp brass for free.
(Scope is not included)
load for Barns LRX 127grs will be provided.

Price: 3000 Plus shipping to FFL

Knights armament sr15 lower, take off. Cerakoted taupe. All kac including trigger and buffer.

Option to include geissele ssa instead.

$1675 shipped to your ffl. Thanks

Also consider trade for atacr 1-8 fc dmx

Box of 100 Hornady 7mm 166gr A-Tips lot# 2221043

$70 shipped

Looking to sell or trade my Razor LHT 4.5x22 MRAD scope. Comes with Leupold backcountry lightweight rings. Great scope no issues. Just going back to SFP for hunting. Be glad to provide more info or pics.

$1150

Trades Cash +/- as needed to make a deal
Leupold VX5 3-15
Leupold VX3HD 4.5x14 30mm tube SF
MDT HNT 26 Rem 700 SA folding
8x42 or 10x42 rangefinding bino’s
Thunder Beast suppressors on Form 3’s
Proof AR-15 Carbon 223/6 ARC 14.5 or 16

Box of 100 Hornady 230gr A-Tips. Lot# 2191015

$80 shipped.

I have 5 boxes of 100 Berger 30cal 245 LRHT bullets all same lot # 2201. 4 boxes sealed and one opened to take measurements.

$400 shipped.

I am looking to buy a long action Terminus Zeus QC or Curtis Valor QC

+- 820 of these same lot #1907
These shot extremely well in my 223AI that I no longer have.
$265 shipped

I pulled the trigger on the Vector X 10x42 DMR's so I am selling my Vectronix Terrapin X with a Really Right Stuff BpNS Arca Plate and Rifles Only Gear Case (Coyote Brown). Also included is original box with all paperwork and the neck strap.

$775.00 shipped USPS Priority, insured for that amount on me. PayPal friends and family with no note or add 4% for fee's.

Originally purchased from Brownell's so there are absolutely no issues or I'd have exchanged them with their warranty.

TR-2 Buttstock in excellent condition
$180 shipped

My bro-in-law is in grad school researching and working with optics and lasers.

Anyone have any decommissioned or broken optics lying around that you’d be willing to donate? He plans to cut them open in the lab as part of his research.

I’ve already hooked him up with a couple cheap hunting scopes, primarily looking for other varieties of mid-grade optics. Don’t need ZCO quality, but something of decent build quality would be helpful.

I’ll cover shipping.

Thanks for your consideration!

MPA Hybrid Chassis Rem 700 SA FDE like new. Does not include bipod. $800 shipped