I had a good year and I’m considering dropping the money on a Skeet-IRX or VooDoo-S before EOY, but I’ve had zero luck finding units in stock.

If I’m going to get my cheeks clapped ($$$$$) paying US manufacturer prices I want to make sure I to have warranty support, so buying used is off the table for me. Any suggestions on a reputable dealer with either of these units in stock? Preference is probably Trijicon at this point. Thanks!

I got a iRay PFalcon 640+ (as far as i know it's the international model of RH25).

It comes with the original box and all the original accessories. Run time is less than 40 hours, I only used it for handheld, hiking.

Overall in excellent condition, no scratch on lens or anything like, never dropped it.

Looking for $3600, shipping via USPS priority or local pick up in socal, santa clarita.

Video footage: Login to view embedded media

Good evening gentlemen,

I’m looking for an aftermarket stock for my tikka supervarmint in 223 caliber. It’s going to be used mainly for FTR/Target shooting. I was leaning towards the Bell and Carlson Target stock CTR. I have a CTR bottom metal and mag to go with it. What’s your guys opinions on it and are there any other suggestions you may have.

Thanks gents

.

I have like new Smoke composite adjustable buttstock
Regular + A5 buffer tube

$369 + tax and shipping at Smoke web store
$149 A5 buffer tube


$350 shipped all together

Looking for a barrel for my Tikka action.

Criteria is as follows…

24-28 inches long

Heavy contour. Something applicable for competition. M24, heavy Palma, proof comp, etc…

Ideally looking for a 6.5cm but would potentially be interested is a 6cm or 6 gt

Threaded muzzle

If you have something you’d be willing to part with please message me with brand of barrel, twist rate, round count if used, contour, length, all that good stuff.

Thank you

16.1” SS Odin Works barrel chambered in 350 Legend with a 1/10 twist and adjustable gas block. Fantastic accuracy and has less than 50 rounds through it. I have a 20 rd 350L mag somewhere I’ll include if I can find it.

Bought this a couple years back for my grandpa to use during gun season but he’s not able to hunt anymore so sending this down the road. Suppresses really nicely!

$250 shipped to you, can include a Dead Air Micro Brake (9mm bore) for an extra $60

Looking for following trades:
Garmin C1 chronograph (+ cash from me)
Standard AR15 BCG (+cash from you)

The Mid-Range Gas Gun Course is a hands-on, skill-building course designed for shooters who want to develop their skills with semi-automatic rifles. This course focuses on engaging targets at mid-range distances (100-600 yards) using the AR-15 or similar platforms. This course will provide you with the tools and techniques needed to increase your accuracy, confidence, and speed while shooting at extended ranges.

Held at a private range

For more information email [email protected] or PM.

Lightly used MDT 10 round 6br magazine. Stamped 308 but has BR follower $55 shipped PP FF/Venmo

Primary Arms PLxC 1-8x24 with ACSS Raptor M8 Meters reticle. Great condition. Includes the box and paperwork. $1050 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-Modbutton Lite (SF Plug)
-Scalarworks Leap 08 (30mm/1.57”)
-Surefire Scout QD Mount (Larue/ADM)
-Radiant Raptor, Griffin SNACH, FCD ACH

Once fired Federal GMM 6.5 Creedmoor brass. 200+ pieces, $55 + shipping.

Once fired 6.5 Creedmoor Norma Golden Target brass all from the same lot. A little over 250 pieces. $80 + shipping.

In good condition, used this for a bit before switching to arbor dies. Never had any issues with it. Also works for BRA. $75 shipped.

It was too high for my setup, never used it other than installing and removing. Like new.
$60 shipped.

$20 shipped. Like new, never even had powder in it.

Forster full length sizing die and ultra micrometer bullet seater. The decapping stem on the sizing die is broken on the end, but the expander ball is intact and functional. You can replace the decapping assembly for $15 through Forster. The seating die is like new.

$100 shipped for the set.

i have some experience in this area and the following is def food for thought.

I’ve got 70 Nosler 190 ABLRs for sale. They didn’t group well out of my rifle, so passing them on. Great hunting bullets. $60 TYD

Lightly used MDT mags with spacer for BR variants. (2) 10 rd mags. 12 rdr is sold. $120 shipped for the 10 rd mags.

Remage 26" 7.7 twist 1" straight 6bra .160 freebore 5/8x24 threads Shot maybe 50 rounds and sat in safe. From Theurbanriflemanstore. 7.7 is a custom order twist barrel. $400 with barrel nut.

Have two 10 round 308 bolt face MDT mags. Also have a 12 round. Used one season this year. Switched to AW mags. Normal marks from inserting/removing.

$100 for both 10 rounders shipped. $55 shipped each.

$60 shipped for the 12 round.

Buy all three, $145 shipped.

PP f&f.

SOLD

Good evening everyone ,
I’m looking for an aftermarket stock for a tikka Supervarmint in 223. I was considering the Bell and Carlson Target stock (CTR) as I also have a CTR bottom metal and mag. It’s gonna be used mainly for FTR / target shooting. Any help and suggestions will be great appreciated

Thank you

I am working on a big game hunting rig based on Terminus Zeus action. Mainly going to be running 300 PRC.

I am not looking for an ultralight rifle. I want it to be shootable and Enjoyable. Perfectly fine if the gun weighs 13lbs no bipod or ammo.

Currently the Foundation revelation and the Manners MCS-LRG-NV are my two choices.

What are yalls experience with these?

​

Impact 737R Short Action Bolt .223-BF / Right Handed/ 90 Degree

It has a few rounds on it and has an Area 419 knob on it.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$386.54

Hello!

I'm fairly new to reloading as I am just starting with PRS over this past summer.


I've noticed a few times that I have trouble chambering brass that I reload, and have narrowed this issue down to brass that was once fired from a different rifle.

A coworker recently gave me a bunch of SRP brass that has these strange lines on the shoulder - He fired them out of his mossberg patriot. I tried sizing one and chambering it in my rifle (savage axis precision) and it will not chamber. In fact, it locks the bolt up pretty bad, resulting in the need to smack it open with a mallet.

The brass hangs up on the midsection i believe, as is evident from the scratches on the case.


IF this sounds like a logical explanation, are there any sets of dies I can buy that will resolve this issue and squish the sides closer to the base back to factory? I am currently using Hornady Custome Grade dies on a lyman american 8 press.

Thanks!