Left hand Manners short action EH1 with gen 1 mini chassis takes aics and Hawkins mags. Sendero channel. Action screws included. Drop in your barreled action and go. Ejection port is defiance length so should work with many. Swamp color $SOLD SOLD SOLD

Manners EH5 short action with M5 and sendero inlet. Bedded for stiller but I've had quite a few in it and only thing didn't line up was ejection port. Could be trimmed easy. $425 shipped

PP FF/Venmo/check til clears

Seems some of the "late additions" to the CR bill being worked on include fucking pay raises for Senators and the ability for members of Congress to opt out of Obamacare.Though it was the greatest healthcare ever?These fuckers just keep giving the USA the finger and stuffing their pockets.

Bought ~2000 of the Hoosier 220gr .309" diameter bullets to shoot in my 300Blk about a year ago (Ballistic Advantage barrel). Sold that upper and built another, and now the barrel is not liking them (V Seven).

There are ~1900 left. I'd swap for a fair value of 220gr plated bullets or sell for $220 shipped to you.

Apologize I know this gets talked about a bunch but things change and I like to get opinions. I’m looking for a light NRL hunter longer range hunting scope. I’m running the 5-25 mark 5 and its pretty decent , field of view is kinda meh and the turrets aren’t my favorite. I have a 4-16 ATACR but want a little more mag if possible and the reticle gets a bit thick at top end.

Looking for something under 35oz’s closer to 30 is better
20x or better would be great
Great glass and great turrets
Best possible field of view
Needs to work with LH action
Illumination preferred but not a deal breaker
Sub 4k

Does it exist??

Selling my recently picked up PSR/MSR Chassis

Brand new old buy, never used.

All hardware comes included, top rail, handguard, stock, screws.

$3200 - SOLD!!!!!

Price drop

Login to view embedded media

I bought this looking at the Hellfire and picking the wrong one cause I was not paying attention so I am putting this up for sale. I am selling this for $130 shipped in the cont usa. I already bought a hellfire so not looking for trades at the moment.

Hello All,

I have a Ruger Gunsite Scout 450 Bushmaster up for sale. This unit has been a tac driver for me the past couple seasons. I want to recycle the funds off this rifle and build a custom bolt gun for next years whitetail season in the midwest. It shoots the Hornady factory ammo well, the Federal factory ammo not as well. Right now I shoot the 221gr Hammers at 2440 fps out of it. Most accurate bullet Ive used thus far. Any questions please let me know. This is as used rifle, I don't beat up my stuff, but you will be able to see that the rifle has in fact gone in and out of the woods.

Comes with everything pictured/listed
Factory box/paperwork
3 length of pull spacers
2 sets of 1" scope rings, 1 high, 1 medium. The medium are brand new and came with the rifle. I didnt know I had them until grabbing the box to take pics
Thread protector
Muzzle Break
Front Sight post
Action Lock
Rifle w/ 3 round Ruger branded AICS pattern polymer mag

Asking $800 net shipped my FFL to your FFL

Great rings, just moved to the area 419 mount and don’t need these. 100$ shipped

Great condition but decided to run a Foundation instead. $750 shipped

Payment via PayPal F&F , Venmo or Zelle

Sorry in advance for asking something so basic but it would save me a lot of scouring the internet.

I am planning on purchasing a T3X Lite in .223 with a 22" 1:8 barrel for coyote hunting and target shooting. I have seen people get great accuracy out of T3X Lite contour barrels with a slow cadence of fire. Max mag length will be 2.44".

I am looking for a bullet and powder combination that is easy to load for (I don't want to chase the lands), is economical, and has decent terminal effects for predator control. I had initially planned to use 69gr SMKs but I am not seeing a lot of love for them online.

Bullets available to me in bulk in my price range include:

Sierre 69gr SMK
Sierra 77gr SMK
Sierra 77gr TMK
Hornady 75gr ELD-M
Hornady 73gr ELD-M

There are also lots of lighter bullets but I wasn't sure they would work as well in wind, in a 1:8, or in wind although I am far from an expert (obviously.) They include 52gr ELD-M, 55gr SMK, and 60gr TMK among others.

Powder available here is a bit limited with CFE 223 and Varget being what I think would work best. I plan to use Remington 7 1/2 primers.

Complete factory AAC 16" 300BLK URG 6 total rounds fired. Includes handguard wrench, rail panels and KAC 300-600m rear BUIS.

No trades, no parting, pick up in DFW TX. $1620 shipped lower 48 Zelle for payment.

Zero Compromise 8-40 with MPCT2 Reticle in great shape. Comes with ZCO rings, ZCO flip covers, and the box.

Price: $4,000 TYD

Looking for an ACC Titan 90t brake with thread pitch of 5/8x24 and it must have the number 103026 engraved on the wrench flats.

Thank you.

Just this morning alone I received notices that I am due a $3590.76 refund for an overpayment on auto insurance, a$3198.19 for an overpayment from health insurance and a 3618.43 for an overpayment by Visa. That’s over 10K today. If these refunds keep coming in, I’m gonna have the home of my dreams and all the trimmings.

I have a Tac Ops Tango51 in excellent condition.

Kreiger barrel 20” w/1:10 twist, threaded 9/16-24 TPI w/thread protector.

260 rounds fired. Scope and rings not included.

$hipped to your FFL in CONUS, buyer pays for any insurance.

Please PM if you have any questions.

Ok first round of prepping virgin brass. This may be over kill for AR loads but its practice for new project soon.
Starline 223 rem.
1. Annealed brass(diy annealer along with templac 750 degree F
2. Ran through just the expander ball on forster die lubed inside of neck
3. Debur flash hole
4. Ran .22 cal bronze in drill press to clean necks
5. Chamfer and debur
6. Dry tumble to clean lube and debris off

Ok so my one question is virgin brass and new 20" WOA barrel. Do i carry on with load development while fire forming at the same time or load the brass on the low side then resize for the load development. Just curious on how my work turned out and will listen to any advice.

I have an HK P30L 9mm Pistol with the German made Threaded 13.5x1 LH barrel that I am looking to get a Suppressor for. Now I am not too familiar with Pistol Suppressors with the Piston systems to make them function correctly. Which Suppressor would work Best for this application including the proper Piston system for the Threaded 13.5x1 LH barrel?


Any help in this matter would be Greatly Appreciated.

Thanks

I haven't made the jump to hand loads yet - and I'm still to new to the game to understand what b makes a particular round better for a particular barrel / setup.

I still get all my ammo from target sports USA. Ive been keeping track of what ammo seems to get me the best accuracy - but I was hoping for some quick suggestions.

1) 20" SS factory LMT 308 / 762 barrel - what factory ammo have people found works best? 1:11.5 twist I think.

2) 16 Larue stealth barrel 223 wylde- I've found that 223 Remington with a 62 ish weight seems to work better than 55 - but what would the experts suggest? 1/8th twist

As always - thank you!

I posted this on another forum but didn't get many replies. I've always wanted a SAUM. The purpose would be for a lite weight hunting rig for whitetail, and perhaps a black bear if one presented itself in my area. Also, the occasional bench session with no rapid firing. Max shots would be around 5-600 yards.
I realize there are a truckload of cartridges that can accomplish this that are more efficient, but like I said I always wanted a SAUM, and I have a new short action kelbly that I was going to use with UM bottom metal and XL mags.

i'm up in the air between a 25, 6.5 or 7 SAUM . I don't really want to go super heavy in a 7 Saum with the 180. I was thinking more like 140-168 with a 7, but that go me thinking that a 140gr in a 6.5 would be better due to the higher BC. Also, shooting a 25 with the 130 class bergers would be the flattest shooting from just punching in numbers.

What cal. do you think would have the best brass life and barrel life of these. Id like to get over 3,000fps with whatever I choose with a 22-24 inch barrel.

Bought another one thinking I’d use both but wife is pissed so the used one has to go. Will come with the choice of either 6.5 or 6 creedmoor pilots and one cutter head. *sold* shipped.

Flint River Precision (Built by Bobby Keigans) 6.5x47 Up for grabs. This rifle would cost you $4500 to have it built today.

The rifle has been shot about 10 times and I will post a group of the first load I tried in it with 130 HVLD’s. Rifle will be a shooter with load development done and shot well under half moa in the one load I tried.

FRP 2 Lug R700 Custom Action
Proof 22” Carbon Sendero 1:8 Twist
Trigger Tech Special
FRP Modern Hunter Carbon Stock
Hawkins Hunter DBM with Mag
FRP Muzzle Brake

Price: $2500

Selling a Vortex Strike Eagle 5-25x56 with illuminated EBR-7C MRAD reticle. The scope is in excellent condition with flawless lenses. Comes as shown in factory box with throw lever and sunshade.

Sold

No trades please.

Hello everyone,
unfortunately life circumstance is requiring me to sell this rifle. I have an Accuracy International AT-LE, it was purchased from milehighshooting and was on the first shipment of AT-LEs to come to the states when they released. This specific one is serialized with a 2018 AT action. With that said, they never engraved it as an AT-LE, I don't think that came until a little bit later but whatever, it's an AT with an AX folding stock added from the factory. With it I have a Vortex Razor HD AMG 6-24x50 mounted with a spuhr 3602, on top of the AI high pic-rail. The heights were set up that way to throw on a bridge and run a pvs-30. This will not come with the bridge.
Additionally, I will add the Atlas CAL bipod with a RRS arca rail as seen in the pictures. It has the original AI 20" 308 barrel, and a proof research 24" stainless 6mm creedmoor barrel. The 308 barrel has around 600 rounds on it, and the 6 creed barrel has approximately 700 rounds on it. Admittedly I didn't keep the best track of how many rounds are on the barrels so those are just approximations. I had other 6mil and 308 barrels I practiced with which is the reason for the lower round counts on these ones. I'm wanting to sell this as a full package priced at $7000. I'm not in a hurry to sell, and if circumstances change before finding a suitable buyer I'll remove the post and not sell it.

To summarize:
AI AT-LE
-20" AI 308 barrel with TBAC SR Brake
-24" Stainless 6mm Creedmoor Proof Research barrel with TBAC SR Brake
-RRS Arca swiss dovetail mounting plate
-Atlas CAL bipod
-Vortex Razor HD AMG 6-24x50
-Spuhr 3602 30mm 20moa mount
-1 AI AW mag.

I have a couple of pics attached from various outings, I can add other pics later.
If you are interested you can message me on here and we can discuss payment methods. For whatever reason you are local to Eastern Washington (Spokane area) we could do a face to face, otherwise I don't mind shipping it to an FFL. I've only ever lugged this around in soft cases, so I can probably pick up a knockoff pelican Apache brand case from harbor freight to ship it in for an extra cost.

Selling my manners eh1 for a rem 700 sa. It has been fully pillar bedded for a thick recoil lug but any good smith can open it up for any 700 short just about. Contoured for a proof sendero and comes with flush cups, a 419 mini arca, a front pic rail, and a savage threadworks stock pack. Also coming with full hawkins dbm. It is elite tac camo but is spray painted pretty badass if I do say so myself. Nothing some acetone wouldn't fix though. Shoot me a message if you'd like pictures or have questions. Asking 750.