Looks interesting. For a CMMG conversion kit.

Looking for a few parts for an Area419 Zero press:

Hybrid turret
Bullet tray
Bullet seating plate
Turret Dock
Zero Storage block
Extra die rings and wrench
Bullet / cigar tray
Inline fabrication 7.5" quick change ultramount

Message me and let me know what you have!

Sightmark Wraith 4k Max 3-24x50

Great Condition, barely used, small scratch on side from tightening the base.

Comes with wicked light shot pro light with infrared and white lens, (3) 5000 ah batteries

$550 $525 OBO Shipped and Insured

Paypal F&F

Springfield Prodigy 4.25 Comp

Great Condition

Comes with Atlas 11lb Recoil Spring, (1) 17 round mag, (2) 20 round mags, AOS Plates for DPP (new), and RMR (Installed), and EGW Magwell

Original Box with all accessories and paperwork

$1,200 $1,150 $1,100 OBO Shipped FFL to FFL

Paypal F&F

I got a 50% off Leofoto tripod kit from NRL22 nationals since I desperately needed a tripod (luckily managed to borrow a friend's but I need my own from here on out). What's the best tripod for NRL/PRS that Leofoto offers? I want to maximize that 50% off and have no idea what the difference between all the tripods are.

For context, I'm 6'0" and one of the stages had us shoot off a tripod (either clamped or off a tac table) so I'm interested in practicing that. Otherwise it'll mostly be used for glassing and general utility (as a table, carrying markers and stuff, etc).

Selling one of my donor barreled actions. Good start for a late M40A1, M40A3, m40a5 or A6 build. Action is stripped with no bolt.

$500 shipped to your FFL

PayPal or venmo

Aimpoint T2 available $665 shipped. Sold

Only mounted once for mockup. Brand New with boxes.

Ships UPS Insured tomorrow.

PayPal FF Venmo

As the title says, Arken EP-5 5-25x56 in some vortex rings. I had it sitting as a backup that never got used. Only took it out the box to put the rings on and then it went back into the box. Sunshade, throw lever, sticker, scope, and rings are all in the box ready to ship for $500.

SOLD PENDING FUNDS

Original Owner

• AICS 2.0
• Fits a Short Action M700.
• Was bedded for a Surgeon 591, so may require minor mod if bedding a standard M700 SA footprint.
• Everything works great, folding hinge is like new, solid and straight.
• Stock was bedded and cerakoted by APA in 2010 and has some scratches to the paint, but the skins are completely intact.
• Includes Atlas BT10 Bipod with AICS adapter as shown.
• $1,600 shipped, or trade for MDT ACC Elite Chassis M700 SA, RH.

PayPal FTF, Venmo, or Money Order accepted.

PM me with questions.

thank you,
Jason

Looking at these two rangefinders don’t have a kestrel and don’t trust the reliability of a constant blue tooth link to my phone so I’ll be using the internal solver. Looks like Leica has a compass and the wind can be adjusted in the unit itself. Does anyone have any input or recommendations? I’m hesitant to go binocular because I’m married to it.
That an for any input.

Brand New
Foundation Samson Dark Distressed
Impact SA inlet/ Genesis Grip
Hawkins M5 DBM
Cheek Riser QD Knob
Wiebad Cheek Pad

$1825 Shippes PPFF/Zelle CONUS

Catch and release for me.

Wanted try a Foundation and really wanted to like it but I much prefer the grip on my different Manners so I'm looking to trade for a TCS. Might consider a PRS1 or 2 if its a unicorn.

Stock is

Foundation Centurion inlet for a 737r in black.
Full brass weight kit and full length arca.
Brass inserts for a thumb shelf (XLR thumb shelf included).
SAP 2 round holder.

Includes Hawkins M5 dbm (not pictured)

Not looking to sell outright at this time.

TacSol Owyhee .22 WMR take-down bolt action.

Cool idea, comes with 3x 9-round Ruger mags (2x will fit in the buttstock storage) and works like a ruger take-down but is a bolt action. Light and accurate. Picatinny scope rail installed. Adjustable fiber optic sights

$975 shipped UPS to your FFL
Not interested in trades

Comes with enhanced bolt/bcg, ergo grip, surefire closed tine war comp, radiant CH. Bought everything new and never shot it. Offloading everything that doesn't get used. Probably wont trade but ill hear offers. One in particular would be a plxc with griffin reticle. $2600

Can come with the nf atacr DM reticle in pics for an additional 1900.

NEW NOSLER BRASS - ALL SIGNIFICANTLY MARKED DOWN - nealy 50% off multiple calibers

New Nosler 9mm +P Nickel Plated - As low as 13.9 cents each
https://ravenrocksprecision.com/pro...DHoOUq-Kal9CAKZ21m9mMVCwGKngWHAIo.TaAw2N

8mm Rem Mag - $89.95 / 50 ct.
6mm ARC - $59 / 100 ct.
30-378 Weatherby Mag - $89.95 / 50 ct.
270 Weatherby Mag - $69.95 / 50 ct.
257 Weatherby Mag - $69.95 / 50 ct.
30-06 Springfield - $47.95 / 50 ct.
25 Creedmoor (SRP) - $42.95 / 50 ct.
338 Lapua Mag - $94.50 / 50 ct.
221 Rem Fireball - $39.95 / 50 ct.

https://ravenrocksprecision.com/shop/reloading/brass/rifle/

Getting interesting near Naples.

Campei Flagrei make’s Vesuvius look like a party favor.

Meh… southern Europe can fend for itself

Sirhr

Proof Elevation 300PRC 22”
Manners LRH High plains
Hawkins M5 DBM bottom metal CIP length
2x MDT CIP 300PRC magazines
Hawkins hinged floor plate
Pelican 1750 with closed cell foam cut to fit.


Approximately 40 rounds through this.

$4200 shipped and insured.

Trades:

-Manners LRH NV SA 700 footprint high plains
-Area 419 zero press standard V2

NIGHTFORCE X-TREME DUTY ULTRALITE UNIMOUNT 1.5" COMPACT MAG 0 MOA 34MM A361. Excellent used condition. $150 shipped.

$2950 Shipped.

PayPal F&F, postal money order, or check (will wait to ship until it clears) works best for me.

Tangent Theta 3-15 hunter model. Mil version. The scope has been hunted and shot with alot. Has some scuffs from rubbing on buckles on a pack, and little dings and nicks on high points. Glass is flawless and just came back from Tangent Theta for a service.

IIRC someone here called this a couple weeks ago . So is this the Event that the Gubment uses for more Patriot Act type Bullshit or some unhinged Democrat ( there are unhinged ) acting like a Democrat ?
Occam's Razor or SSRI Falayvaaa ?
FBI investigating 'targeted terror attack' in Boulder, Colorado, Kash Patel says

ADG, that makes all the brass, appears to be coming out with their own action via their Facebook with a replaceable bolt head.



Comments states

First prototype. These will be available sometime Q4. Remington 700 footprint, integral recoil lug, integral split pic rail, user replaceable bolt head, stainless action and bolt, available with a nitride finish option as well. They will be available in short and long action. Weights will be coming after testing finishes up.

Please read entire post.

For sale is a 20in Bartlein Carbon Fiber barrel for RimX action. This was a part of the SH group buy back in early 2020
(https://www.snipershide.com/shooting/threads/bartlein-carbon-fiber-22lr-rimx-prefits.7006313/)

It was chambered and threaded by John at Keystone Accuracy in PA.

FULL DISCLOSURE - I've had problems with this barrel on my specific setup. The problems were intermittent when I first got the setup complete in 2020 but I then moved across the country and didn't shoot it again until 2024 when I moved back to VA.

It was having regular failures to feed, extract, and stuck rounds in the chamber using Center X, SK, and Mag22.

After speaking to Ray at Zermatt in December 2024 (emails avail if needed) , we believed that the chamfer on the mouth of the chamber was too large. So I connected with Keystone Accuracy and John rechamfered and set it back.

After getting back from Keystone in Early 2025 the issues got better but still persisted intermittently and I didn't have the time or energy to deal with it further. It could have been some stacking of unknown tolerances with my prior chassis (krg Bravo along with this barrel).

I have now changed the setup with a different barrel and stock and I am now issue free.

So in the slim chance someone wants to dive into this, please recognize it may continue to need to be addressed.

/dear diary post over.

Barrel spec:

20in
~2.5lbs
Tennon is 1.18in
Muzzle before threads is 0.89in
Approximately 500rds through it

These were $800ish new if I recall my invoice correctly.

Selling for $300 shipped. Would be willing to trade only for match 6.5creed ammo or 7.62 175gr FGGM.

Prices are shipped, willing to sell as a package for less or prices individually below:

Dillon S000022 XL750 Progressive press, new in Dillon Box - $SOLD
Dillon 22059 Quick change kit for XL650 / XL750 (QTY 2, new in box) - $SOLD each
Dillon 10443 Machine cover for XL650 / XL750 (new) - $SOLD
Dillon 17950 Roller handle assembly (new) - $SOLD
Dillon 21101 conversion kit for .222 Rem Mag , .223 / 5.56mm , 22 nosler for XL650 / XL750 - $SOLD
Dillon 10096 Carbide .223 rifle dies (3, new) - $SOLD
Dillon 14406 Pistol dies 9mm (new) - $SOLD

Brand New
Giraud 6.5 creedmoor cutter head with blade.
Still wrapped in the paper towel and taped from Giraud
$50 shipped

My mom inherited this Mauser from her late father, none of the family wanted it so she took it. I looked into it a bit and found that it is a desirable one, but missing some parts such as front sight hood and cleaning rod. Are there any companies that sell replacement parts or manufacture new ones? I’d like it to be as close to 100% as possible. Thanks