As new didn’t even put the battery in it. In my opinion still the best “budget” scope in the market. Comes with all original packaging and accessories.

Vortex viper PST 5-25 with EBR 7C reticle
Vortex lo pro bubble level
Vortex throw lever
Vortex defender caps
XLR 1.46” 30mm rings

$$675 shipped

PP F&F/Zelle

In excellent condition only 400 rounds fired through action and barrel. Never tried ammo brands or lots other than cheap Norma tac 22 which shot great. This comes with the upgraded bolt from Zermatt and it runs smoothly without issues.

30moa base
Proof 20” 22LR 1:16 SS competition contour barrel
Triggertech special 2 stage flat shoe trigger

$1375 shipped
PP F&F/Zelle

Individual shipment FFL

Matte black - night vision - 7.5 MOA delta (triangle), DPP

Brand new in box, never mounted or used

$300 shipped

I have for sale a 2014 quick lock, AI AT that has been installed in an Accuracy Obsession chassis with an AX butt stock conversion, GTAC AR pistol grip conversion, and AI competition trigger.

The action is bedded into the chassis just like it was in the original AT chassis. The AX buttstock conversion also required bedding. I bought the rifle used just for this project and have long since sold off the original chassis. It has a Hoptic check pad(plus two spare replacements), a PLF338 3D printed bag rider along with the original AI bag rider. MPA EVG grip. The competition trigger is set to what I would guess is 1.75lbs and has never had a hiccup. It has been 100% reliable so it's kind of a unicorn. The chassis comes with two internal weights. A 1lb and a 2lb. It has full ARCA and MLOK. The rifle will come with one mag. Your choice of the modified AW that has the +2 MDT extension or an unmolested AW mag. No barrel. No scope. The chassis has some cerakote wear marks and the bolt face has some fire checking from the previous owner pushing 308 and Varget hard. I've had no issues with the bolt or entire rifle for that matter. The bolt is stupid slick. Large Primer firing pin. Everything functions and shoots well. The 6.5CM and 6CM barrels shoot really damn well. $3400

Available to the buyer is a total of 10 AW mags.

9 additional mags $500

Proof AI prefit in 308W. 26", 1600rds $600

Proof 26" full bull 6.5CM by Fritz at Black Canyon Customs. 560rds $800

Proof Comp contour 6GT, 24" by Straightjacket Armory. 1200rds $300

Proof Heavy Palma 6CM, 26" by Straightjacket Armory. 680rds. $300

$1200 for both CF barrels. $1500 for all four.





300yd groups
Must ship from FFL to FFL.

brand new, unopened

$80 shipped

Proof 16” 1/7 twist 22 ARC Barrel
110 rounds on it. 60 factory and 50 handloads.
Barrel Only $330 shipped
Package deal: Barrel w/ Odin works ARC BCG 110 rds of fired brass and 50 pieces of new brass. $500 shipped
I also have Hornady dies and some bullets if interested.

Open to trades. Would consider high end 223 wylde ar15 barrels. Prefer 20”. Trying to reduce number of calibers I load for.

Cleaned and deprimed. $200 shipped. Paypal friend or Venmo

Bought these and made 1 dummy round. Never ended up loading 6.5 Grendel,
Redding Type S bushing Full length die set
+ a free brand new Lee 6.5 Grendel full length sizing die
Brand new
$175 shipped

5 boxes of 6.5 / Lapua 123g Scenar bullets
$190 shipped
Thanks for looking
Cross Listed

Looking to sell a Manners LRH SA RH stock with a mini chassis. Stock comes with Hawkins Hunter DBM and two mags. One is like new for a 6.5prc/SAUM and the other has been used/modified by a previous owner for 308 family.

Liking for $800 shipped. Color is midnight molded

Would trade for an Impact 223 bolt/ maybe a 308 family bolt

So I ended up getting a foundation Samson for my Terminus Zues QC. It came with the brass weight/rail. Way too heavy, switched to Aluminum and removed ALL Brass I could find. Still to heavy. I like the stick but it is too heavy still. I could try to sell it ( with both sets of weights) or find a way to remove another couple of pounds. Not sure how much ditching the black top weights buys. Not sure how to safely bore out the butt stock. Any ideas?

Area 419 Zero Press
Includes all original accessories
Will also include a quick change plate from Inline Fabrication

Asking SOLD shipped - no trades please

Peterson brass. 390gr hornady a-tip loaded 375 ct. $450 shipped for 75 rounds

I have two identical McGowen AR barrels. 223 Wylde, 7.7", stainless button rifled, Mid-length gas, cerakote black, 5/8 24 muzzle thread.

Embarrassing story: I ordered the first one, installed it, shot it, it shot 3" groups. Called them and sent pictures of groups, they made another barrel and sent it to me. Same thing, 3" groups. Pulled the barrel and installed an ARP barrel, same thing. At that point it dawned on me that the gas block was smacking the inside of the handguard and it wasn't any of the three barrels. The ARP barrel remains in my blaster and I have had these two McGowan barrels sitting in the corner for 4 years. They have some red loctite remains sitting in the threads and have had about 50-100rds on them. Gas ports are sized for adjustable gas blocks.

$125 each styd

Used 29" Zeus QC, Bartlein 1/9.5, Heavy Varmit contour, 300 rounds, muzzle thread 3/4-24. I am going in another direction if anyone needs this barrel.
$450 PayPal (Friend & Family)

Bought this and never ended up building a Grendel. 1000 pieces same lot still in the box.
Starline 6.5 Grendel brass cases
$450 shipped for 1000
Or $245 shipped for 500
Cheapest on the Internet.
Thanks for looking
Cross listed

380* rounds of Hornady factory 109gr ELDM rounds. $500 shipped for the lot

Any smaller qty pays actual shipping

Has anyone switched stocks that have pretty much the same ergonomics and seen a noticeable difference in their performance behind the trigger? I switched from a PRS1 to a TCS for my centerfire comp rifle and for some reason I’m struggling to get the same level of accuracy, now I wondering if it’s just mentality messing with me or something else.

I really noticed a difference yesterday when I was bouncing back and forth between with my other rig that’s still in a PRS1 and the TCS, everything felt very similar but there was just something off just don’t know if it’s mind over matter or actually something different enough to make a difference.

Benchmark M24 contour 6mm 7.5t - $335 styd



Mullerworks 6mm Heavy Palma, 7t -$335 styd

As title states, looking for a 6 or 25cm and 7saum prefit for origin/solus. Would consider savage small shank. ~20-22” CF or lighter contour steel 2.5-3# ideal would consider up to 4lb. Thought I’d see if I can get something of a budget before I place an order.

Brand new, never used Railchanger X with Coletac D-Bag
Asking $170 shipped CONUS

Up for grabs is my full scope, red dot, and level setup in a Spuhr mount. It is ready to plug and play on a new home. I have had zero issues with any of it, just ready to move to a different optic for PRS. The scope turret cap screws show some wear and there are slight rubs here and there but the glass is flawless and the scope tracks perfectly. I believe I captured the condition well in all the attached pictures.

The RMR got a brand new gasket and lens from Trijicon in September 2024

Asking $1600 all in for the package, including shipping
I would prefer to sell it together, so not willing to split at this time

I am located in DFW if anyone would like to meet face to face

Here are the parts and values I'm factoring in:

I picked this up in trade and almost don’t want to sell it because it’s so nice, I just don’t have much use for it.

Built by Viking Tactical:
- lone peak Ti Action
- OMR 1:7.5 20” (will verify length) threaded 5/8x24
- Titanium brake
- Manners pro hunter stock with Hawkins low pro bottom metal and mag
- Triggertech special flat shoe
- comes with direct mount 34mm rings
- right around 100 rounds on it
- I can try and get a weight on the bathroom scale but this sucker is light.

$3,800 shipped obo. Will entertain trades for mil/mil FFP optics, stacatto XC, or Wilson combat project 1.

Like new in box. Zeroed on a 22 creed hunted with once. Then sold rifle.

Comes with badger 34mm rings.

600 shipped to your door.

Extra for out of lower 48.

Pics added below

Lightly used Kahles K525 DLR RSW
Includes Paralax Spinner & Throw Lever
Tenebraex Caps
Neoprene Cover
Box, etc

$2500 PP/FF or trades for NF Atacr 7-35(Mil) or Razor Gen3 (Mil)