Amp mate case feeder stand kit
$shipped con us F&F or add the fees

I've got a brand new in package pair of Crye Precision G3 Combat Pants in M81 camo. The size is 32 Regular. These were from OP Tactical's latest drop a week ago. I was lucky enough to snag two pairs, a regular & long. I tried both pairs on and decided to keep the long pair. Instead of messing with the return process, I'll give some on here the shot at them as they're stupid hard to come across in normal sizes, without giving a kidney for them. I'm asking $450 shipped, just enough to cover all the shipping and payment fees and break even on the $375 price tag.

Looking to part ways with a lightly used origin SA.

Details:
Origin SA
26” proof competition contour 6gt 1:7.5
Vision brake
Timney HIT trigger

Full barreled action has 160 rounds of factory ammo down the tube. Just looking to free up space. Prefer to keep entire thing together.

Asking 1500

New member from Nebraska….US Army vet (Ft. Bragg…1987-1991)

Apa fat bastard gen3. No screws, 5/8-24 30 cal - $125 shipped

MDT acc premier 700sa right-handed for sale. Comes with action screws.
shipped con US F&F or add the fees. SPF

Strike Eagle 5-25 EBR-7C mil reticle in Warne rings leveled and ready to shoot.
Not a scratch on it as it's wrapped. Only 200 rounds down it.

$650 shipped F&F or pay the fees Con US

New Custom Build #4

(1) New Ridgeline RD15 FDE Build kit.
(2) Geissele 18" Cut Rifled SPR Barrel.
(3) Superlative Arms .750 AGB
(4) VLTOR A5 H2 Buffer System with JP Rifle Length Polshed Spring.
(5) Geissele Enhanced BCG
(6) Geissele FDE Ambi Charging Handle.
(7) Tuned Geissele SSA-E X Trigger.
(8) B5 Precision Stock.
(9) B5 Grip.
(10) Dead Air Xeno Muzzle Brake and Suppressor mounting system.
(11) Atlas BT65-LW17 GEN. 2 CAL BIPOD with Arca adapter.
(12) Vortex HD Gen 3 Razor with Bobro QD Mount.





Surprilitive Arms .750 Set Screw AGB has plenty of clearance.



Assembly was basic and straight forward. make sure to think ahead on what and how you'd like to assemble the RD15 Builders kit.



Both the Barrel and Handguard are mandatory thermofit's, just remember that when you Torque the Barrel Nut down it will expand the Handguard Mounting Area of the Upper receiver requiring heat to expand the handguard for proper installation.




Anti- Rotation Pin Instalation.


Extra Gas Vent Ports.


Looking Forward to sharing the initial Range Report.

More to come.

Jake

Everyone and their mother has a different cleaning regime. Different products, different process and different definitions of what cleaning is.

For many years my cleaning process for precision rifles has been follow boretech instructions. Maybe do a cycle or 2. Gun shoots well again and is good for 100-300 rounds before next cleaning.

Then I got a borescope. And I realized how much hard carbon builds up in the grooves , especially in the first 10 inches of a barrel. I suspect I am not really cleaning the barrel fully each time and just adding layers of hard carbon and copper. When I clean I am stripping most of the copper and leaving in carbon? Maybe.

Now what really matters is how it shoots. Is the gun predictable? Does it hold zero , velocity and shot group size over a 250 round weekend?

I am not so much interested in your cleaning regime as in your philosophy on cleaning. I am positive with the right chemicals I can strip this shit out, but do I really need to?

And it goes without saying the accuracy demands, round count and requirements for something like a PRS shooter is much different than F class or Benchrest.

Do most of you feel like getting all the loose shit out of the bore is cleaning? Do you think you need to strip it down to steel to be clean? What have you experienced performance wise doing different methods?

I recently went back to Sweets 7.62 since its a much more effective solvent than Eliminator or C4, as well as using oversized brass brushes (6.5 for 6mm). It seems to pull more shit out but the brushes also wear out super fast. I might get 4-5 cycles of wet patch/scrub with brush before the brush is wore out and i feel little resistance in bore.

Trigger Tech Special Remington 700
Right Handed, Without bolt release for Remington 700 clones
Single Stage
Straight Flat shoe
Brand new in the box
$ shipped F&F or add fees conus

Action and Barrel has 200 rounds on it so it's just broken in and ready to go to a match. It’s smooth as butter. Shoots FGMM lights out.

- MPA 3-lug Short action for remington 700 clones
- MPA Match barrel, 26”, 1:7 spun up by MPA. Threaded 5/8x24.

$ shipped Conus F&F or add the fees.

I go through the ARs I compete with and replace cam pins, firing pin retainers and this year I decided to change buffer springs. My main competition rifle is five years old and though it only has about 3500 rounds in it I figured why not.

Main rifles have mil spec carbine receiver extensions and all have 4oz Spikes Tactical carbine buffers. I ordered three Springco blue springs and swapped them out. Blue slings were about 1” longer than the ones I pulled so I thought at the time I made a good choice .

Issue 1. Shot about 60 rounds down a 14.5 with 5.56 RC2 ran fine. Cases drop 3’ away at 4 o’clock. All good. I put the rifle up dirty with an ECI in it. Pulled it out to get it ready for some shooting after our 3 x 1000 today. Remove the ECI, hit the bolt release and nothing. Bolt didn’t budge. I pull the charging handle back a couple times and nothing. I smack the stock with my hand and the bolt dropped. Cycles fine afterwards and shot fine but this was odd. Never seen this before. Tube and buffer are smooth, no scratches, no excessive fouling.


Issue 2: Today I bring my 15.1” RECCE out with AEM5. First time I have shot it with the new spring. I can’t get through 4 shots without the bolt skipping over the case and jamming the rifle. Did it four times. Buddy had his 14.5 with him with standard mil spec spring. We swapped them and it Ran through 30 rounds with no issues.

I’m not shitting on these springs but I’m not happy . It seems like the one in the 14.5” bound up and the one in the RECCE was too strong/fast and wouldn’t reliably run with my USGI 30 rounder or my buddies 20 round colt mag.


Anyone else ran into anything like this with these blue springs?

Just got an elk tag and pulled an old 300wm out of the safe, it probably hasn’t been shot in 7 years. I noticed the muzzle threads are messed up, I sent it to be threaded years ago and there is no relief cut between the threads and shoulder so a suppressor or muzzle device doesn’t have a square shoulder to index on. Anyways I want to order a new barrel for it and am thinking about going the 7prc route. Everything I read says going from 300wm to 7prc is just a barrel change, I read they share the same bolt face. My question is will the 7prc cartridge fit in an old AI mag designed for 300 wm? I also need to decide on barrel length and profile, I’m kinda leaning towards 22” sendero, but open to any advice.

The Green Goblin...



(1) 20" Craddock Precision RTR 22 ARC Barrel (Rock Creek Button Cut) 1-7 Twist / +2 Gas System / Heavy Profile / .875 Gas Block Journal / 5/8x24 Threads.
(2) JP Grendel Bolt.
(3) New Old Stock LaRue 5.56 PredatAR Rifle.
(4) VLTOR A5 H2 Buffer System with JP Polished Rifle Length Spring.
(5) Fixed .875 Gas Block
(6) Full Ambi Controls
(7) Magpul PRS Lite
(8) Tuned early Production Larue MBT.
(9) Nightforce FDE ATACR 7-35 F1 MIL XT.


Shoots Hornady 88gr ELDM and 75gr ELDM Black Factory ammo very well, Suppressed and unsuppressed. Hates the 62gr ELD-VT

Only 40rds down the the barrel, the 88's look very promising. I'll put another 100rds down the barrel and update as the barrel breaks in.

I'll most likely start Load Development with the 75 ELD's, with TAC and XBR.

Barely shot through, took off of a Geissele upper. A couple of marks from initial removal. Asking c $90 shipped.

Did Grayboe stop making stocks for the T3X? I don’t see it as an action inlet option anymore.

Like new Vortex Precision Matched Rings 34mm 1.26" tall

$old.
Discreet PayPal Friends and Family or Venmo gift.

Drum Roll.... It's Microsoft "Copilot". And it's included in every new Windows update. It fully tracks every fucking thing you do in all of your devices. Including online credit card transactions. That includes everything, ammo purchases included...

I've been tracking that shit for a while now and it's out of control! It tracks EVERYTHING. Of Course they'll you it doesn't

So, I went and tried to disable it. Guess what? It can be done but it takes a deep dive. Furthermore, if you have the same MS apps in say Apple devices, you can't get rid of it without fully deleting your MS apps for good.

The only way to do it is to erase that apps in Apple. If you put them back in they start tracking again. I finally got that stuff out of all my Windows software - one machine at a time, but I'm sure the damn Copilot will all come back on any auto/manual update you choose to do on your windows software.

The way to fully take it out of Windows at present is to go the System page and completely delete Copilot from there.That's working, for now. Have to do it on every device.

And, there is no way to take it out from Apple devices that are running Windows apps without permanently removing those apps.

Talk about "Big Brother. Frack!

Brand new MK Machining 34mm Ultra Low Profile Billet Scope Level

$old.
Discreet PayPal Friends and Family or Venmo gift.

New 5x5 Precision Heckler Ergo-Vert Grip for ACC Elite

$old.
Discreet PayPal Friends and Family or Venmo gift.

Nice Leupold Mark 4, M1 turrets, fixed 10x. Glass is excellent, mildot reticle and comes with scope rings and Tenebraex caps pictured.

$900 shipped, PayPal F&F, Venmo, Zelle, USPS MO SOLD

Brand new MDT ACC Elite Interior Forend Weights (pack of 5 weights)

$155 shipped.
Discreet PayPal Friends and Family or Venmo gift.

Like new Area 419 Vector X Arcalock mount

$old.
Discreet PayPal Friends and Family or Venmo gift.

Good condition first focal plane NXS. 3.5-15x50, MD2 reticle and high speed mil turrets. Zero stop. Glass is in excellent condition.

$1450 shipped, PayPal F&F, Venmo, Zelle, USPS MO. SOLD

Vortex Fury 5000 AB LRF Binoculars with Aziak Equipment arca clamp. Comes with all original accessories and box.

Glass on front and rear are immaculate. Rubberized body is flaking in high wear areas but does not affect function.

$875 shipped.
Discreet PayPal Friends and Family or Venmo gift.