As the title states, looking for a Hawkins m5 DBM for a Long Action. Needs to fit a 300WM AICS Mag

Bought a new boat and need to clear up some money.

Selling a vortex razor gen2 4.5-27 mrad with the ebr7c reticle.

Asking $1,500 shipped. Add $100 for Nightforce mount.

Or is the lower fine? This is in the magwell. Will the crack get worst or can i use the lower long term without cause for concern? Should i buy a new lower?

By luck or fate or just the power of Thor I have finally acquired a M40A6 chassis….. however…..the top rail was cut and cleaned down and refinished just behind T26. Not sure what the thought process was, but the original owner said something about railflex under certain conditions. Either way, now I need solutions. Do I attempt to find a whole new top rail? If so any ideas on that? Or do I go with a custom fabricated base that matches in height and is the appropriate length to appear monolithic?

Also, not necessarily a clone purist, any thoughts on a good action? I have considered GAP just aren’t sure if they are still doing A6s.

Any help would be appreciated. Thank you.

I’m looking to buy or trade for a scope.

I’m thinking vortex razor gen III 6x36
Or zco 5-27 or similar to these scopes.

I have cash, vortex spotting scope,
Or the new Zeiss LRP 15x56 binos with reticule, vortex furry AB binos to trade.

Hey guys,

I coul get a Hensoldt 3,5-26x56 for my Sako M10. I have a mint S&B PMII 5-25x56 sitting here with a p4fl reticle, LT, MTC.

My question is, is the Hensoldt still cream of the crop or is it outdated. I noticed polish units using it on their M10. The price is significantly higher compared to a S&B.

Any real world experience on these two scopes? Or general comparison between the Hensoldt and the PMII's.

First class rifle deserves first class scope, however, im not sure if its worth 6000 Euros...

Best regards

Daniel

For sale:

Vortex AMG 6-24x50 mil scope. Mechanically 10/10, visually it has some dried loctite on the body, I didn't want to try and scrape it off and risk scratching it. You won't notice it once mounted. Comes with original box and all the stuff that came with it.

$1600 obo

Leupold Mark 4 12-40x60mm VXSS Spotting Scope
-Non-commercial M151 Optically Enhanced 53756-U1-U2 model
-Excellent condition, no field use. Only mark is from installing a BO SLICK (see pic)
-Comes as shown with soft case and a roll of camo wrap
-Reticle is not inverted
SOLD

Schmidt & Bender PMII Ultra Short Riflescope, 5-20x50 with a 34mm tube with the H2CMR FFP Reticle. Comes with American Precision 34MM rings and Tenebraex lens covers.

3500 shipped

Text 361-649-7065 for any additional info.

No prenups or divorce papers, ever. Plus you can order the fetish that really blows your skirt,..

Unertl 100mm spotter and tripod on marketplace


No connection to seller

Purchased (2) from Caruso and haven’t found the need for the second so passing along the solid deal he gave me.

Following payment I can break the seal on FaceTime if buyer would prefer.

Price is $2675 including FedEx insured shipping

LMT MLC Upper 700
16 inch mid length CL barrel 325
Dead air one port break included with barrel
Small rail scales included with upper
Lmt ambi CH 50
LMT EBCG 425

1350 shipped or as labled

Pencil in time for next years shoot.



https://www.facebook.com/llasalfiredeptment/

No affiliation, just looks like fun and for a good cause.

Thank you,
MrSmith

Selling just the upper with bcg but no bolt and a PRI gas buster CH.

$1400

Vortex Impact 4000. Professionally painted black.
$1250

NIB Ballistic Advantage barrel hanson profile 13.9" with low profile pinned gas block mid length. they are about $225 new at Primary Arms. $200 obo

Bix N Andy TacSport Pro X 2 Stage Rem 700 for sale

Like new, curved smooth trigger.

Price: $old

I accept PayPal Friends and Family, USPS Postal Money Orders and Checks for this item. Please see my feedback, many happy customers.

Most of you probably remember the Battleship Game played as a youngster. Well I watched a video of a couple of gentlemen playing the shooting game at 300 yards. So I thought that it can also be played with rimfire rifles, pistols or air guns at an appropriate distance. Here's the video:

Login to view embedded media
A couple of PDF files of the target that I produced are attached. You will notice that one version of the target has the numbers on top with letters on the side and vice-versa. I noticed that there are variations of the game in some online photos. So I have produced two versions of the target depending on the game you have.

When printed actual size on 8.5 X 11 paper, each square is 3/4". I would have liked to made them larger but couldn't due to the constraints of paper size and MS Publisher.

I suggest that you print it on card stock to get clean bullet holes in the paper. If you have a printer that can accommodate larger paper such as 11 X 17 you could select "fit to size" on the options and get larger squares to shoot at. Nevertheless, a .75" square should not be a problem for a precision rimfire rifle at 50 yards. For 8.5 X 11 paper or card stock remember to select "actual size" in the print dialogue.

The rules are modified for the shooting game and printed on the target. Put some money on the game for added stress.

I am open to any suggestions for improving this game. You will have to purchase the game board separately

For sale: Primary Arms SLX 1x Microprism ACSS Gemini for sale

Price: $170

I accept PayPal Friends and Family, USPS Postal Money Orders and checks for this one. Please see my feedback, many happy customers.

Holosun HE510C Green for sale like new, only taken out of box.

Price: $old shipped

I accept PayPal Friends and Family, USPS Postal Money Orders and checks for this one. See my feedback many happy customers.

In as new condition not loading BR anymore

$75 shipped
PP F&F

Just the upper, no bolt, or CH, liberty precision eclipse brake.

Rounded up 400 down the pipe. Rattled canned but in great shape.

$1400

I'm wanting to install a dimmer on a three pole switch but when I opened the switch cover and pulled the switch, there is not a ground wire attached. This in a multiple switch box.

Any help would be appreciated.

Pics-

Current switch



Edit: added pic of entire box exposed. The green on the other dimmer is connected to a bare ground wire.




New dimmer. Same manufacturer as the current switches.




I'm also wanting to add dimmers to single pole switches but those switches are in similar type box and wired exactly the same as the first pic. I initially installed a single pole dimmer but lost power to some outlets and lights I'm assuming are farther down the line from the single pole switch.

Brand new manners TCS MAX Elite saltwater camo. Never used. These have the micro chassis and accept any bottom metal. Bipod not included.

$1350 for the chassis
$1550 with a new Hawkins BDM

Message, call or text me. 815-878-8255