Need 100 pieces of new or once fired 25CM Alpha brass. I'll consider 6CM brass if you have it. Only need the 100 please. Will only deal with buyers with good feedback, and have been members of the hide for some time.
Thanks

Had this for about a year, but going in a different direction.

$1800 all together ($1650 if just the scope)

shipped & insured CONUS

Don't need any trades

PM me if interested

I am looking for preformed 22 Dasher Brass if anyone has some available for sale. I don’t think any manufacturer has made new 22 Dasher brass. If not I would like to purchase 200 pieces of 22 Dasher brass that has been formed by reducing a 6 mm similar cartridge. Also looking for a 22 Dasher full length resizing die if such thing is available. Please PM me with any ideas. Thanks, Doug

Going to Arizona soon. The wife and I will be traveling in our pickup and pulling my 6x12 cargo trailer. Going to spend four nights in Sedona, then to the Grand Canyon for a day and night, then home from there. Concerned about stuff I've read about reservations regarding firearms. From most of the stuff I've read the general consensus is to have any and all weapons unloaded, cased, and out of reach. Mostly concerned with Arizona, Oklahoma, Utah. I have permits from MN, FL, and UT but sounds like that doesn't matter. Need some solid advice from those that know!

Unless I misunderstood. This YouTuber says that the parallax knob is for dialing to distance. Someone correct me if I'm wrong. About the 5: minute mark. Login to view embedded media

SOLD

KRG W3 Folder with enclosed forend, Rem 700 SA inlet

No modifications, dremeling and or cutting and in excellent condition.

She has the following upgrades:

- Enclosed forend with integrated arca rail
- overmolded cheekpiece
- Adjustable (side to side) cheekpiece mount
- Angled bag rider

$1199 shipped to your door

This is a chassis only sale. Scope, rings, barrel, action, trigger, bipod NOT included.

SOLD

Item gone

So with my alpha brass I have found the bottom of my cases to not be flat and the shoulder to be .01 away from first firing.
After first mild load the brass smears the cartridge wording slightly as that base flattens against the bolt face and the shoulder elongated to my rifles chamber.
Putting a straight edge on the bottom of my brass revealed the concave bottom. Is this normal with alpha brass? I also get heavier than normal bolt lift.

As a quick disclaimer- I've got more 1911's than any sane person should own. Primarily my collection consists of mostly Colts and also has a good representation of Ed Brown's, Dan Wesson's, Les Baer's and a Tisas's thrown into the mix.

I say that only as a reference point that I'm far from "new" to the 1911 pistols. That said- I have one (and just one) that's "acting" unusually for me & within my self proclaimed "vast" experiences.

On to the behavior I'm trying to diagnose- I have a recently purchased Colt Mark IV Series 70 that's completely stock internally at this point but does have aftermarket "medallion" walnut grips. So that's what I'm working with here.

The "behavior" that's screwing me up is that while assembling/disassembling it the slide locks up after relieving recoil spring tension by first taking out the recoil spring plunger. And I mean it locks up completely.

I'm 100% certain after playing around with it at this point is the barrel is moving... ("out of battery" doesn't sound right given the assembly/disassembly process but it's absolutely the barrel "moving" and that's how I was able to work through this to get it both taken apart & put back together.

So I figured out "what" is happening and "how" to work through it, but for the life of me I can't figure out the "why" this is happening. I have way more 1911's than Snow White had dwarves but this is the 1st time I'm seeing this.

Could it be the link size causing this?

Again- I've got her taken apart & put back together but this is the first time I've run across this... "eccentricy" Has anyone else seen this?

-LD

Selling my Alpha Dasher die from SAC. This uses the modular bushings (not the Redding type).

Comes with a .265” and a .266” bushing and has the decapping expander mandrel installed.

Asking 350 shipped. What you see in the photo is what you get. I cannot find the shims. Selling because I sold my dasher and won’t be shooting matches for the foreseeable future. Can throw in a lock ring of some sort if so desired.

My local gun shop has become a Class III dealer and I want another suppressor. On paper, both the Rugged Obsidian45 and Gemtech Lunar-45 meet my basic requirements for a pistol suppressor to be used with .45ACP and 9mm.
Does anyone have first-hand experience with either of these suppressors and, if so, what are your thoughts?

Thank you, Richard

6 box's 156 Berger Elite Hunter. Asking $325 shipped

I’m considering getting an AI at-x or at-xc. However, on the at-x I am seeing people label them as gen 1/2/3.. what’s the diff between them? Google doesn’t seem to be much help here as it tells me there aren’t different generations of the at-x.

Excellent set of Seekins/Vortex 35mm 1" rings. Asking $120 shipped

Q Side Chick for sale…time to clean out the safe. It is nearly new in the box, with all of the original contents. I bought it to install a RazorTi titanium receiver, but it didn’t fit because of the top rail and larger bolt knob. After trying a different bolt knob, I disassembled it and put the SideChick back into the box. You can see a slight rub mark on the inside of the shoulder stock where the knob rubbed. The chassis is like new otherwise. Please let me know if you would like more photos.

If you’re not in the NH area, I’d be happy to have a dealer of your choice examine and verify the chassis on your behalf…before the purchase.

Price ***Sold and Shipped***, shipped lower 48, USPS Priority, tracking, insurance, Sig required.

Not looking for trades, Payment: Venmo, Zelle, or Cash if local

SOLD

Autotrickler V3 with AMD scale. Includes all of the Area 419 upgrades. Also includes Area 419 cover. Does not include powder pictured. Everything works flawlessly. Just not shooting/reloading any longer.

$1250 shipped.

View attachment IMG_1242.jpeg

I’ll have a line on multiple Harris HF5800 radios, basically the PRC152. Wanted to gauge interest and see whether anyone would be interested. See the Radio details below. Will have pictures soon if enough interest is generated.

Condition: all used to varying degrees. Some pretty fresh.

Types:
- The regular green 152, internal GPS, multiband 30-512mHz
- The waterproof (black) devgru models, internal GPS, multiband 30-152mHz
- VHF only models, no internal GPS, 30-110mHz (most likely would be a package offer for 5 radios)

All radios have:
- working encryption modules; AES128, AES256, CITADEL128, CITADEL256, operator programmable
- operator programmable frequency hopper, both fixed frequency hop and wide-band hop
- over the air encrypted cloning
- all functions are unlocked and FFP programmable.
- all functions are tested and fully operational. There’s simply too many specifics to go over all here, so if you have questions on specific functions, ask.

US Persons only!!!

The pricing will be $2k-4k depending on the model and condition.

This is the British SA80 conversion kit by Ally and Kaufman for the Brownell's BRN180 upper in 5.56. It is an excellent copy and fits perfectly with no modification to either the kit or the upper. I did have to make a copy of the SA80 flash hider to accept the SA80 bayonet. The Brownell's upper has a standard 1911 Picatinny rail so I had to make an adapter for the original British SUSAT sight that has a 19mm rail. My copy of the original flash hider, pinned and welded to the barrel, brings the overall length to a legal 26.5 inches. The rifle handles and shoots great.

Actual SA80



Ally and Kaufman SA80 kit with Brownell's BRN-180 upper








SA80 bayonet. This a shoot thru design that fits around the muzzle. The blade is offset.













British Army fighting knife, broad Arrow marked


British Army issue Kukri

Thinning the herd on my lasers, I've got two of these in Tan and one in Grey. All units are LNIB, indistinguishable from new, full kits, just been sitting in my safe for probably 8 months now.
$2500 each FIRM.
Tan has sold. Grey is still available.

Selling a couple Vortex Strike Eagles 5-25 with EBR-7C MRAD illuminated reticles.

Scope #1 (first three pics) is in like new condition. It was mounted once and stored in the safe. Comes as shown in factory box (rings are gone).

SOLD
Insurance not included.

-

Scope #2 (last four pics) is in good condition with some field use. It has a couple small blemishes on the scope body but nothing serious. The lenses are flawless. Comes as shown with the throw lever and rubber cover.

SOLD
Insurance not included.

No trades please.

I’m sure no one new she hated white people and celebrated their murders until today- I’m sure in every other aspect of her job she was amazing and professional and a hell of an earner .

Spuhr SP-3016 cantilever scope mount. 30mm 1.5” height 0 MOA cant. Built in level bubble. Was briefly mounted on an AR-15. Immaculate shape. This mount has been discontinued and is hard to find. Box and papers. $SOLD shipped.

For sale:
Like new Area 419 Scope Mount 1.53" (39mm) height, 34mm scope tube size

This is the unimount, comes with case, star drive bit, ring juice.

Price: $old shipped

No trades

I accept Paypal Friends and Family, USPS Postal Money Orders, checks with a wait. Please see my feedback, many happy customers.