Trump should do this guy next



Along with anyone else prosecuted for political or gun reasons

Midsouth shooters .55gr .224 Varmint Nightmare Bullets.

3 - 500 packs
1 - 344

$175.00 shipped

I have one NIB Pulsar Thermion 2 XG60 that have arrived. I’ll let it go for $SOLD shipped to the lower 48. Let me know if you have any questions. I would take these in partial trade.

Proof Research 22CAL 8TW 24" in sendero lite or sendero
Manners MCS-NS short action and I would take two of these
MDT Hunt 26 with ARCA and folding
Lone Peak Fusion action
ARC bolt for Lone Peak and or an Impact
NigthForce scopes with T3 reticle
6BR new brass in Lapua or Alpha
22BR brass or compnents
Genesis 12GA

Perhaps a bit early, but seems like a good time as any to get a thread going on this.

With the X4 FCS being specifically targeted at 30mm tube scopes with 30mm objectives, what do folks think will be the best options for it in the following categories?

1) 1-X LPVO
2) 2-X Medium Power/SPR
3) any high magnification contenders?

of course the choices will be refined as we know more, but it will help to have a reference list

so far my initial thoughts is that the March Shorty 1-10 will be very compelling if it fits the rings, and those with more of a focus on the low end might prefer the Vudu options.

I'm not 100% sure there's any 2-10 or 2-12 options that have objective diameters small enough?

I have read the existing threads I can find on this 3-18, they seem to peeter out sometime last year. Who out there has some time behind one? How are they doing as far as tracking, reliability, etc? The form factor is what I am looking for and I have always been a big DMR fan but damn the DMR3 is too heavy for whaI I am doing.

If anyone has owned both how does the 3-18 compare to the 5-25?

General thoughts are also welcome from those who have actually used these scopes. Thank you

Some real winners in this one. I was bored at work last night so I watched it. Don't judge me.

Login to view embedded media

Nvision Halo XRF

Unit has never been used, stored in a temp controlled safe. Unit has been turned on and tested for function but never mounted.

Comes with batteries and charger.
All original items included as it came from NVision.

$6,800 OBO Shipped
Prefer PP F&F or Venmo

Trades:
Nox35 plus $

Looking for a 35mm set of rings or mount. Prefer area 419 but I’m open to other options especially if it’s a good deal. Really want to go with medium or low height. Let me know what you have!

I work for a state agency building web applications for public services. I am married and we have a toddler. Wife is a stay at home mom and my job pays well.

America has given me everything and I’ve always wanted and still want to join the Army and serve. It sounds selfish but I want to keep my current job to support my family but serve at the same time. I am 29 years old and would like to get some input from the Hide, before I talk to a recruiter. What can or should I do to stay with my family and continue my full time job and serve at the same time?

Not sure if this will help anything if I join the Army, but I have a master’s in computer science, bachelor’s in electronics and communication engineering. 7.5 years of experience in information technology.

Thanks

So I've got all this stuff and need to raise some money. In this post , I have giraud trimmer, 6.5cm, 300 blk, 308 and 223. There are a total of three trimmer heads but I can't remember which one's. I would assume the 300 and 308 share sizes, so it's one or the other.

Retail before tax and shipping came to 919 let's do 700 shipped.

Also have .308 110gr E tips that are about as good as you can get for 300 Blackout supers. Cheapest I can find is over a dollar, will do .60 cents each unless someone can show me anything cheaper. Probably have 2k. Buyer responsible for shipping cost on these.

I'm listening a bunch more until I raise the funds I need, then I'll probably pull everything as I still use most of this stuff.

I’ve been waiting too long for my custom parts to show up and need a barreled action for coyote hunting. No bull barrels trying to keep weight in kind, no longer than 20” barrel 22 or 6 creed only. Lmk what you have

Pair of Combat Troodons
Both full serrated on top
Merlot has very slight carry wear on clip
Turquoise has never been carried and shows no wear
Merlot $400
Turquoise $425
$800 for the pair

Up for sale is an Amp mate Revised, Dillon variable speed casefeeder w/Large rifle case plate and the AMP Mate Casefeeder Stand Kit. This setup has worked really well for me over the last year or so but I'm no longer annealing large quantities of brass at once. Both units were purchased new and have about 400 cases through them.

$650 Buyer pays shipping

Includes:

• AMP Mate Revised
  • 3x shell guides (large, medium and small)
  • 2x feed tubes (large, medium)
  • Power supply msrp
  • USB Cable
  • Manual
• Dillon Variable Speed Casefeeder
  • w/ small rifle plate
  • Manual
• AMP Mate Stand

lapua 6.5 creedmoor srp brass $115 shipped

500ct .22cal Atips $315 shipped

Obliviously can work with ya on shipping if buyin more than one

Also give me a couple days or so on shipping as life sometimes gets in the way

LIKE NEW, $60 shipped, DISCREET PayPal F&F or Zelle, no trades, thanks.

Uses stainless T3x action 308 bf with SA bolt stop and 20 moa Area 419 base. Comes with CTR dbm and 2 10 rd mags, factory T3 style mag and dbm, and both unopened Sterk swept bolt handle and TRG syle shroud. Action is very clean and in excellent shape. Looking for $950 shipped to FFL

***SOLD***I’m looking to sell an almost brand new
Night force scope. 7-35-56 Mil - Xt reticule
First focal plane. Color is FDE. It comes with everything as if it were new. Box, manual, sunshade, tri-Allen key, lens wipe and pouch, windage beauty ring, thread- on covers to match and the throw lever which is installed .
Has the illuminated reticle, see it on in the picture. One small scope ring mount mark, pictured below, otherwise pristine.

$2700 shipped with insurance/tracking.

Interested in buying a used ZCO 527 with MPCT3x any color is fine.

Would also be interested in any mount you may have with it.

I have a brand new unmounted ZCO 4-20x with MPCT3X I’d do a straight trade on.

I’d sell my brand new 4-20 ZCO MPCT3x for 3500 shipped.

I have a new chamber reamer coming, and rather than burying it in a brand new $800 barrel right off the rip, I need to cut a new test chamber.

Looking for heavy profile 26" non carbon fiber barrels. Stainless, etc, doesn't matter.

Hawkins 35mm Med height rings.

$100 shipped.

Area 419 Hellfire brake. 30 caliber, stainless, 5/8x24.

$110 shipped

I have a used. but in good shape QC (quick change) Curtis Customs Vector Short Action with .308 bolt face.
It’s right handed with 2 bolt Knobs, action screws and trigger pins. It has about 3000-3500 rounds, roughly 2 barrels worth of rounds through it. Works exactly as it should.
Looking for $950 shipped to your FFL.

I would consider trades as well. Looking for higher end binos for spotting hits at 1000 yards.
Something like vortex 18x56 or similar.
If there’s a difference in value I can make up the cost.

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

American Defense 34mm Recon mount like new

$110 shipped

PP FF/Venmo

G&S add 3% and will be shipped signature required

All,

Have a Nightforce NX8 1-8 FDE in Mils with Capped Turrets. Also have Nightforce Ultralight mount 1.2 inch.

Want to trade both for Leupold Mark V 3-18 TMR3 OR Vortex Razor LHT 4-22 in Mils.

Like new two vets recon v2 ls invert tripod with 55mm ball head and area 419 dual clamp (arca and picatinny) only took it coyote hunting twice so still in like new condition. $800 shipped