No expiration 100% free cert
$1100 and I will send you a pic via text or email.
Zelle cash app usps mo cert check Apple Pay for payment

Looking to sell Kestrel 5700 with 4Dof
Works as it should, no issues.
Like new, changed my mind on this unit and too late to exchange.
SOLD

I am perplexed with this. Still fairly new so perhaps I'm missing something obvious?

6mm Dasher, 30in barrel. I zeroed at 100y Used a free ballistic calculator to get the dial at 500y, showed 9.1 but what was accurate on paper was 8.5
No problem, environment etc affects.

Zeroing temperature was 68F and this was at 13F, if that affects.

300y - calculator showed 3.7, actual was... 0.5 up

What doesn't make sense is how my actual dial is up by only 0.5 at 300y when I zeroed at 100y
I haven't had a chance since then to verify at 100y again, that's my next step. Is there something am I missing or for some reason my zero changed drastically on its own?


Thank you

Up for sale is a pre-2014 AX AICS R700 LA chassis and several AI accessories/parts. These came with a rifle I purchased that I'm now parting out; see below for full description and prices. The chassis is a pre-2014 AX AICS in sage green, inlet for a Remington 700 long action receiver, and comes with a target adjustable (height + cant) buttstock and rear spike/monopod kit installed (original stock, spacers, and monopod blanking plate are included). Also included are two Pic rail segments with QD sockets and a bipod/sling stud adapter for the handguard. The trigger pocket has been milled slightly but this shouldn't affect function.

Chassis package ($1700 shipped) SOLD
- 1x Accuracy International Pre-2014 AX AICS Chassis (Remington 700 LA inlet, sage green)
- Original cheek rest, butt stock pad and spacer included
- 1x Bipod/sling stud adapter (installed)
- 2x Picatinny/QD rail adapters (installed)
- 1x AI-6892 butt spike module (installed; chassis blank plate included)
- 1x AI-6899 target adjustable butt plate (installed)
- 2x Accu-Stack Short Comb 2.5mm spacers (installed)
- 1x Accu-Stack Short Comb 7.0mm spacer (installed)
- 1x unknown high comb cheek riser


Other accessories (Price + flat $5 shipping; free shipping if purchased with the chassis package)

- Accu-Stack Short Comb (1x 2.5mm, 2x 6.0mm, 2x 7.0mm), $5 each
- 2x AI-4124 spacer kit for spike/target adjustable stock, $15 each SOLD
- 1x AI-4593 spacer kit for AW spike/standard butt, $15 SOLD

All prices include shipping, tracking, and insurance unless otherwise stated. Will consider partial/full trade towards the following items (with cash on either side as appropriate):

• Sage M14 EBR chassis (PMRI standard barrel a plus)
• Sage EBR PMRI rear end
• Sage M14 EBR heavy barrel guide block

I accept most forms of discrete electronic payment including Paypal F&F, Venmo, Zelle, CashApp, as well as mailed USPS MOs; if you have no recent feedback or are new I reserve the right to require a USPS MO. Due to state laws I am unable to accept trades for magazines >10 rounds unless permanently blocked to 10 rounds or less.

I have a Spartan Javelin 9" - 12" hunting bipod that has never been used.

Includes the bipod and mounting accessories. The Picatinny mount adapter is currently installed on the bipod.

SOLD

Used good 30mm scope rings extra low, great shape selling. $100.00 shipped.

Need another pair of pants and always looking to save a buck if possible.

The purpose of this machine is to measure and dispense an accurate powder charge using extruded smokeless powder that is within +/- a single kernel. Of course, speed is important as well. One of the features of the Delta APM is that it takes the kernel density into consideration when delivering individual kernels. This allows the system to feed a pre-calculated number of kernels without having to evaluate the total weight between delivering each kernel, which in turn speeds up the process.

This is a very accurate powder measurement system capable of measuring repeated charge weights to within a single kernel. The FX-120i has become a staple in gunpowder automated measurements and the APM from Jimmy Todd utilizes it to accurately dispense extruded powder to the +/-0.02g. This APM has been upgraded with a Harrell's Precision Classic Culver Measure. The Classic Culver Measure features a double roller bearing construction (needed for repeated use while under tension from a chain drive), Brass metering devices with 4 cutting edges encapsulated in aluminum which is capable of chopping through any kernels that stop other volumetric measures on automated devices. The Culver Measure has a 6 to 120 grain capacity.

I have attached the user's manual for more info and you can contact Jimmy who will help with any questions you might have setting it up.

No trades, please. 5% Discount for Cash. Local face-to-face transfer is preferred but I can box it all up and ship it if needed.

Price: $1000.00 for everything in the picture
Location: Centennial, CO
Contact: DM me [Lou] with your phone number and any questions. I will message or txt you back and if you want to move on the sale we can talk over the phone and work out a payment.

Ok guys need your advice. Just did a load work up on my 6gt and I’m getting a little primer cratering. The gold primer is Hornady factory ammo and the silver is cci450 I used for the reload. Both look very similar but I’m not wanting to wear out primer pockets early. Brass is Hornady. Load is
Berger 105
36.9 gr of h4350
Cci450
Hornady brass
2935fps

I found 2 more of the speed nuts, $50 shipped for the pair.

First off, I'm going to acknowledge the "how in the hell?" question that people over on arfcom have been hitting me up with. I initially had five of these Swarovski EL binos and have sold two. I did some work for a dealer and we came up with an idea that helped us both. He'd over bought on these and they aren't moving fast enough. So he offered them as partial payment at a significant discount. So he cleared out inventory, doesn't have to come out of pocket as much, and I get to sell these to increase me profit on the job. And yes, I'm making a profit on them. That doesn't mean I can just give them away, but they are significantly cheaper with me than with anyone else. Onto the sale!

My rules: I do not accept payment via goods and services. On request, I'll link you my profile on arfcom where I have 287 positive feedback spanning almost 14 years.

Edit: I'll accept paypal, venmo, or cashapp for payment.

NOT looking for any trades at this time.

Three BRAND NEW Swarovski EL 10x42 binoculars. These are all unused with full warranty in place. $1500 shipped each.

Swarovski NL Pure 10x42 binoculars. These were taken out on two hunts. Insanely clear and amazing in every way, but it's honestly more than I need in a set of binos. $2500 shipped

Swarovski Z6i 2.5-15x56 4AI illuminated reticle. This scope got zeroed and then sat on a rifle for a few months before I kind of fell into a Z8i. No lens covers for this one. $2000 shipped.

SOLD Leupold Mk5 3.6-18x44 Tremor 3 non-illuminated. Model number 173299. This is brand new in the wrapper. I thought I was going to build something for this, but that never materialized. $1600 shipped. SOLD

Schmidt & Bender Klassik 2.5-10x56 with illuminated reticle. I went from this to the Z6i and then to the Z8i. This was mounted and never zeroed. Very light ring marks that are only visible under perfect lighting. $1300 shipped.

Eotech HHS V. This is an EXPS 3-4 with a G45 5x magnifier behind it. Brand new in box. Just another thing I picked up thinking I would make a build around and never did. $1,000 shipped

REM 700 SA. Installed briefly in Impact trigger hanger, but new and never even left the house. 0 rounds on it.

$265 shipped.

Payment via PayPal F&F, Venmo, or Zelle

Like new MPA Mount. 34MM tube, 1.250 height, 20 MOA cant.

$185 shipped

Price include shipping to US50.

#1: Area419 6.5mm Hellfire + Hellfire 5/8-24 Barrel Adapter SOLD.

#2: Area419 6.5mm Hellfire + Hellfire 5/8-24 Barrel Adapter SOLD.

#3: TBAC SR NTB (non-timed-brake) 5/8-24 Thread SOLD.

#4: Dead Air E-Brake KA180 Nomad 1.735” SOLD.

#5: 3x AICS Mags (1x 10rd Accurate Mag, 1x 5rd Accurate Mag, 1x 10rd Magpul) SOLD.

Price include shipping to US50.

#1: 4 boxes [80rds] of 143g ELDX 6.5CM SOLD.

#2: 6 boxes [120rds] of Norma 130g Golden Target 6.5CM SOLD.

#3: 8 boxes [160rds] of Federal Gold Medal MatchKing 69gr 223Rem SOLD.

#4: 2 boxes [400rds] of Winchester M855 62gr 5.56 SOLD.

#5: 2 boxes [400rds] of Winchester M855 62gr 5.56 SOLD.

#6: 2 boxes [400rds] of Winchester M855 62gr 5.56 SOLD.

My account just got approved and I wanted to check in.
For those who care in between the Lakes and White Mountains (Pemi FG)
Hope to talk more soon

I pulled this barrel at 1780 rounds. No loss in accuracy or speed. Would work well for practice or rechambering or barrel work practice.

Cut for impact action
CRB barrel. 28" comp contour
3/4 muzzle threads.
.274 neck .120 FB

Cerakote patriot blue

$120 shipped.

Mags have the binder plate. All in excellent condition and hold 5 rounds 308, etc.. $115 shipped.

Decided to pull a safe squatter out that's been on vacation for several years now. Kimber 82G that picked up over `10 years ago. The stock was messed up (Several vise gouges). Filled in the holes then had the stock hydro dipped. Harrell tuner with Weaver T36 scope. 5 shot cold bore group at 50 yards SK Rifle Match. It's fun to go old school every now & then.

MDT ACC Elite Chassis for REM 700 SA

full internal weight kit, 4 external weights, bridge, dampeners, 5x5 grip (installed), elite grip, gas peddle. New with boxes. $1800 shipped.

Brand New with Boxes

$1800 Shipped Conus

PP F&F or Venmo

Brand New in Box never fired
SR-25 lower receiver


$1800 $1600 shipped conus to FFL

PP F&F or Venmo

Scope glass in perfect shape, one scratch on parallax turret other than that perfect shape.
$1650 shipped. PPFF or Zelle

New Radian Raptor AR15 charging handle in black. $65 shipped CONUS.

Hey there!

I've got a cabelas covenant 7 currently living on my 308 and I'm thinking about possibly upgrading to an Arken EP-5....


HOWEVER, the more I read about the Arken, the more I second guess this move.


Has anyone on here compared the two? I don't really have any complaint with the Cabela's scope, especially being that I got it for a steal (I work PT behind the fun counter).


Anyone care to chime in on this? I could always wait and get something like a vortex pst or a razor next year - just dont want this to be a waste.


Thanks!
-Chomps