LNIB Used for 1 club match. JAllen Gen5 black with internal weights and extra grips. 1150+shipping obo

SOLD - New Lapua 223 Rem brass. 303 pieces total. MTM ammo boxes are included. $75.00 shipped per 101 pieces. Check or money order.




Lapua 260 Rem brass. Pulled from Berger ammo. 220 pieces total. MTM ammo boxes are included. $120.00 shipped per 100 pieces and $24.00 shipped for the 20 piece box. Check or money order.

I’m trying to free up space and get rid of stuff I’m not getting the normal time to accomplish. Like produce 308 ammo.

X2 500ct boxes(same lot) one opened to exact 250 and the other to measure ogive. 750 total

$200 shipped, Venmo preferred.

Love,

Sam19kilo

Rifle - Asking $3900 Shipped to your FFL, I am selling for a buddy of mine who thought he wanted to play the PRS game.
Defiance Tenacity Action
Proof Barrel - Chambered and assembled by Area 419, 300 rounds fired
Hellfire Muzzle Break
MPA Matrix Pro Gen 1 - Midnight Bronze
Trigger tech Diamond trigger


Area 419 Bolt Handle
Gray Ops MPA Speed Nut - 2 of them
MDT 10 round 6mm Dasher Magazine

Extras - if wanted
299 pieces Alpha 6mm Dasher Brass - once fired, cleaned and annealed.
Sierra 107 Matchking bullets - 700
Whidden Bushing Die - SAC .265 bushing
Wilson Inline bullet seater
PMA tool bore guide

I just opened up a brand new BCG that I bought from KAK and it has this on the bolt face. I have never used their dual ejector BCGs before. Is this supposed to be on the bolt face????

SR5 G2. Has some scratches because it's been used, and is missing one of the leg retention screws. Works great just needs a small screw that will fit to keep the leg from sliding all the way out.

$200 shipped

AMP cert for $400 off an MKII or a bullet seater. Good till the first of November.

$150 to me.

Selling for my step dad, he bought it and it’s way too much of a gun for him haha. It’s like new, has 33 rounds through it. It shoots very well, he got lucky and got a good one lol. I was able to shoot 4, 5 shot groups with it the other day and all but 1 were 1 moa or better with hornady eld ammunition (1 group was like 1.2moa).
$1700 bare gun
$2300 with Athlon Midas Tac Gen2 UHD 5-30x56

People need to see this. Actions have consequences. Life is not always pretty.

Prove me wrong

Can't seem to find a frank and Marc upcoming schedule. Thanks for any help

Fascism is used every day by everyone, mostly by politicians, and especially lately. What does Fascism really mean, and why is this term being used all the time?
Well, story short, its Italian, first used to describe Mussolini's mission in the early 1900's. And I quote:

"fascism /făsh′ĭz″əm/

noun​

1. A system of government marked by centralization of authority under a dictator, a capitalist economy subject to stringent governmental controls, violent suppression of the opposition, and typically a policy of belligerent nationalism and racism.
2. A political philosophy or movement based on or advocating such a system of government.
3. Oppressive, dictatorial control."

So, no one in our country is guilty of that. Not yet anyway.

The term has become so diluted that now everyone can be called a Fascist. So, the term now is meaningless. These days every politician using the word and 99% of the population probably has no idea of what it really means and where it came from.

For more, if you can read, read this:
https://www.merriam-webster.com/wordplay/fascism-meaning-and-history

WTB A QUALITY MADE XM-3.

Spuhr SP-4036 mount for S&B Ultra Short models. This mount is now discontinued in Spuhr's catalog. Fits most other model scopes as well that have less than a 2" wide turret housing. (Spec sheet included in pics below). Optional Spuhr accessories available, as listed. All parts come as shown.

***The Spuhr mount and Raptar rail w/ space are SOLD. Only the RMR Interface is available***

Price:
1. SOLD for Sphur SP-4036
2. SOLD for Spuhr A0019-D Low Raptar Rail w/ A0001 4mm spacer (w/ screws)
3. SOLD for Spuhr A0010 Trijicon RMR Interface (no screws)

I want to buy a Sphur SP 4808 34mm mount, if you know of one available please contact me.

I am looking for a CZ 457 shop to test barrels with, action only, barreled-action, or in a chassis. Willing to trade for a rebarrel job.

Brand new 2x Aero 20” 308 MTU/M24 1-10 twist barrels.

Black $250 shipped
SS $225 shipped

I’m selling a Modlite Piglet plhv2 light head ($180 shipped) a modlite 18650 body ($50 shipped) or both as a combo for $190. I’ll also throw in a modlite stand off adapter with whoever purchases one of the items first or if bought as a combo. All products are new and still in oem packaging. Venmo only

GAP is building me an M40A1 clone complete with MST-100 scope. Does it effect the value of my rifle if I paint it?

What gives? I can edit other posts outside of px, but my initial for sale posts within the px doesn’t give me the option to edit them.

Do I need to have a certain feedback or post count?

This thing is a beauty. I’ve never shot an AR this accurate. I don’t know what fairy dust GAP puts on this, but it works. I’ve only shot factory Hornady 108s out of this and it shoots sub 0.5 MOA (close to 1/3 MOA) all day long. I’ve attached a group to show that. This will come with 3 Duramags (10 round, 15 round, and 20 round). They all feed flawlessly. This is a factory GAP-15. I bought this for my wife to get into shooting with me and she prefers pistol so I need to put this money elsewhere. The only scuffs are right by the mag well from shooting off of barricades. The barrel has 491 rounds through it. Please let me know if you have questions.

Selling this for $2600 shipped (individual to FFL). The Area 419 Arca rail and Fat Bastard 6mm brake aren’t included but also can be if interested. I’ve got RCBS Matchmaster 6ARC dies and N540 that can be added if interested.

This is the link for the build (MSRP of $3388): https://www.gaprecision.net/gap-15.html

Defiance Deviant SA w/ 4 barrels

- 308 is a match contour (under 50 rounds)
- 6.5x47 Lapua is heavy palma (10 rounds)
- 6 Creed barrels x 2 are heavy palma (one is unfired and the other has less than 50 rounds on it)

These are all stamped Exodus Rifles. The gunsmith was Joe Walls who now runs Walls Rifles in Florida. I am the second owner. I took this setup in a trade and as much as I would love to keep it, with a new home and job I can’t justify it. I have shot the 308 and 6.5x47 barrels (the 6.5x47 is currently on the rifle) and they absolutely hammer. I shot both AA11 and the Berger 185 Juggernauts out of the 308 and it shoots every 5 shot group under 0.5 MOA. The 6.5x47 shoots just as well.

I currently have the 308 and 6 Creed barrels packed up but if you’re serious and want pictures, I can get them. They look just the same as the other barrels. I posted a picture of the 6.5x47 barrel in a Manners LRH and the 308 barrel in an MPA Vanquish. Let me know if you have any questions.

Whole setup to your FFL (individual to FFL) for SOLD.

The trigger is not included but I can add for another $250. I can include a generic action wrench for another $50.

Rifle is built end to end and delivered by Stutville at StutvillePrecision.com

Action : Impact 737R

Stock: Foundation

Trigger: Bix n Andy Tacsport Pro

Scope vortex 6x36

3 Barrels all chambered by Stutville for the Impact 737R action

Barrel #1; 6CM (~150 rounds) 26 inch

Barrel #2: 6 Dasher (~150 rounds) 28 inch

Barrel #3 6 Dasher (New never fired) 26 inch

Case : Pelican V800 Case

In addition, I'm throwing in 4 6 dasher alpha brass cases and an Area 419 sizing die (these two items alone are almost $1000 value)

Asking price is $4799 + shipping non-negtiable. This is almost 50% discount compared to what I paid for this build.

View attachment IMG_3841.jpeg
View attachment IMG_3847.jpegView attachment IMG_3849.jpeg

Prices do not include shipping unless you buy it all!

***NOTE:*** I will NOT PM you first, you must PM me if you’re interested. This is first and foremost an effort to stop you from getting scammed by an account with a similar username as my own, but it also weeds out the lazy noobs who are unwilling to take some initiative and start a conversation first lol.

With that out of the way, I have the following items for sale which are primarily (though not exclusively) for reloading .223R/5.55x45 stuff. If it’s not listed below, then it’s not available.

-RCBS Bullet Puller w/ standard .22cal collet $25
-RCBS Universal & Heavy Duty Decap die w/ 3 spare pins $15
-Sinclair Hand Primer w/ small anvil only $80
-Hornady Stuck Case Remover $14
-Sinclair flash hole deburring tool $15
-Hornady Comparator set $14
-Sinclair #2 case tray $10
-Frankford Arsenal Bullet Puller $13
-Sinclair clear drop tube $10

Please note, USPS charges something like $11.20 for small flat-rate Priority boxes and it only goes up from there. Unless you want to pay full shipping, I’m not terribly interested in selling you one $10 item. Bundle things up to make it worth both of our whiles!

This will be cross-posted, so the first public “I’ll take it” followed by a confirming PM to establish comms will have first rights. Thanks!

Hey all. Brand new, unfired SR25/AR10 barrel in 6.5CM. 14.5 inch, rifle gas, gas
Block is .750 and barrel is threaded 5/8x24.

Made by HTX concepts SR25 Cartel.

$599 shipped conus.

Potential trades: +/- some cash either way obviously

Area 419 cantilever 36mm mount
Trijicon RDS
TBAC bipod.
Ckyepod single or double pull
Garmin chronograph
KAC SR25 mags
URX 3.1, 4 or 6 rails
Sig P229 or P226 pistols
Terminus Zeus actions
TT diamond AR10 or R700
Proof carbon blanks
Terminus Zeus QC barrels
Manners NS mini chassis
TBAC SR muzzle devices
KAC QDC muzzle devices
.264 bullets 130-147

Looking for a CZ 457 1.18" straight barrel. L3i or similar. Let me know what you've got.