The lame brain just signed whatever was put front of him. Tap the video for sound.

Login to view embedded media

Leupold VX5HD 3-15x44 with windplex reticle in MOA. One scratch on the bell and the windage cap has wear on the bottom knurling. Comes with Mark 4 rings, alumina flip up caps front and rear and a vortex lopro bubble level. Comes in original box with all the stuff that it ships with. The free cds dial has already been redeemed. $750 shipped, pay pal f&f preferred

Brand new never used Forster 6mm Creedmoor full length sizing and ultra micrometer die set ordered directly from Forster and never used. I will include 100 rds of once fired hornady brass to sweeten the deal

$250 Shipped

Kestrel 4dof link $375 shipped. Used this for one season, it’s been stored in a soft case in a magpul daka can its entire life. It’s in great shape. Ships with the soft case in the original box with all the stuff it ships with

Unopened case of RL15.5
Located in SE WI, can not ship.
Asking $500 for the whole case.

More stuff on the chopping block

300rds total

2 lots- 100rds and 200rds

Asking 500$ shipped

Athlon Cronus Gen 2 - 7-42 Tactical Spotter with mil reticle. Brand new and honesty great little spotter, just decided spotting scopes aren’t for me.

Fantastic with night vision and thermal use because of the low base. I’ve included a couple of pics at 15 power at 125 yards.

Pride drop to $600, no trades please

Selling my new/seal action wrench for SR15 & SR25.

125 SHIPPED

Pulled these off my Terminus Zeus QC 6.5cm. I want to switch it up with a different stock and calibers.

Manners T4a Elite
-mini chassis
-short action 700 foot print (Straight bolt)
-pic rail up front.

$1000

SOLD Patriot Valley Arms (PVA) 6.5cm Barrel (Terminus Zeus QC prefit)
-m24 contour
-24” long
-6.5cm
-test fired only

SOLD $650

6.5cm brake (I think apa lil bastard)
-take off from barrel, what you see is what you get

$100

Looking to trade for Carbon Fiber barrels for the Zeus or as blanks in 22cm, 6cm, 6.5cm, 308 or M5 Bottom Metal.

Maven RS.4 5-30x56 FFP CFR-Mil
Riton Conquer 7 PSR
Bushnell elite tactical (g4, h59, T3)
Zeiss S3

PayPal F&F, CashApp, Venmo. PM all questions and offers.

Ultra rare Sage ebr in 6.5 creedmoor. Loaded Springfield upper with stainless barrel from factory. Only 50 rounds down tube. Comes with 2 mags and has springfield scope mount picatinny base, Does not come with scope or bipod. I will take $3450 shipped and insured to ffl or face to face in NC or meet.
Trades or Partial trades:
Scar fde
MDT Elite chassis
MPA matrix pro2 or vanquish
Sig DH3 P320 or Spectre
MPA ds9 pistol
Staccatos
Springfield Prodigy
whatever else might be interesting

So i recently picked up a 6gt and need to work up a load for it but it’s 50degrees. My question is (using h4350) can I do the work up and when I find a node just load some and warm them up before shooting to verify no pressure issues in warmer weather? I can wrap them in a heat pad to bring the temp up to 90 degrees pretty easily. Is this a fairly safe indicator of pressure in warmer months?
Hornady brass
H4350
Cci450
Berger 105

Atlas Nyx for sale. Purchased in fall of 2024. Less than 500 rounds. 4.25” barrel. Sub 2lb trigger. Surefire light included. Three Atlas magazines (17 rounds) with Atlas range bag. Very clean.

Also included are the 2024 limited edition laser grip panels.

$4250 and free shipping to the compliant states.

Exactly what the title says. I don't have the trijicon box it comes in anymore but other than that it's a green MRO with unity mount. Works great, no issues. Just thinning the herd..

$400 shipped

I need to get my Bergara premier Rem 700 SA action rebarreled with 6.5 CM Hart barrel, which has been ordered. Looking for reputable gunsmith in NoVA or within 2-3 hours from NoVA (VA, WV, MD, PA) to rebarrel my rifle (Fit, Chamber, Cut, Crown and Thread). I am located in Northern VA.
I know Clay Spencer is in VA but not sure if he is still taking orders directly.

My time frame is March-April

Lightly used set of Redding competition bushing dies for 300 Win Mag. Comes with all 3 dies and 2 neck bushings

$210.00 shipped

I came across a product line from Savior Equipment today and suffice to say- it's held my attention. I did a quick search here but only see a handful of threads mentioning their rifle cases. but nothing about the two SEMA backpacks they sell (handgun focused). Specifically I'm asking about the below models...







I haven't been able to encounter this brand or product line "in the wild" yet but from what little I'm able to find about it these, I'm really digging what I see. I can envision a niche this would fill for me, seem to resemble a similar line from GPS and address some of the reasons I chose not to pursue trying out a GPS backpack for myself, but I'm just not familiar at all with these and what little I'm finding seem to also be biased reviews.

So I turn to the Hide to see if anyone has come across one of these personally or (even better) owns one and if so I was hoping to see what you thought of 'em. The elements I'm particularly interested in relates with the build & material quality/the realistic usability of the space/ the practicality of it's size (since it is a rigid design)/ and also- the weight. I find it to be rather odd that, at least as far as I can tell on their website, the weight of either bag isn't specified.

I have found that Midway at least provides the shipping weight (7.6lbs for the compact & 19.6lbs for the pro sized!?). Which doesn't seem to jive with what their marketing videos portray with the 'Pro' being about 30% larger. And truth be told I don't put much stock in the stated shipping weights from Midway nor does the shipping weight accurately translate to the product weight. But I'm sure you can see what that particular element has me scratching my head and why that'd be a significant consideration. I'll also say that Midway seems to be offering these at a much better price than by purchasing them directly from the company.

I will say the boxes they ship in are also rather unique (which I also dig) in that the interior of the cardboard boxes seem to contain shooting targets at each section. Pretty cool.

But yeah- anyone here use/see/handle either or both of these bags, and if so, what were your thoughts? I 'want' to love them and give them a chance but was hoping there would be some experience here to speak to their opinions. Thanks in advance.

-LD

6mm 110gr - 286 count - All same lot - 2 unopened 1 with 86 in it. $160.00 shipped

Purchased a 40x action that’s US marked above the serial number and clip slotted as well as drilled and tapped for iron sights on the right rear of the action body that was from the best of my knowledge all done at the Remington custom shop and was NOS from their closure that was picked up by PTG, the entire bolt assembly is all PTG which I did myself and is a one piece bolt with small diameter firing pin, m16 style extractor and swept handle. My question is, what would this action have originally been used for?

For sale Nightforce ATACR 7-35x56F1 Mil-XT Black. Open box, never mounted. Not looking to trade.

Will ship FedEx, insured.

Looking for a GTAC Engineering grip adapter for my AI AXSA. Preferably black

Also looking for a 6mm Creedmoor and a 6.5 Creedmoor barrel, as well as a 5/8x24 TBAC CB brake

Thanks
Nick

For someone who's planning on shooting 180gr or less from a 300wsm, is a 1/9 twist too fast?

Hey all,

Selling my ZP5 3-15. It's mostly brand new. I took it out once to a friend's ranch to do a bit of LR shooting and then it's been with me hunting a couple times.

I rarely use the rifle this optic is on and the few times I've used it, I've realized more and more I do not really care much for this reticle. I also have another FN SPR that is needing glass so I've decided that selling this could go towards replacing it with something that has a reticle that works for me plus have a bit leftover to put towards glassing my other SPR. There are 3 very small blemishes that I have pointed out.

1. The time I took it out LR shooting I didn't realize that my rifle was ejecting the spent brass onto the windage turret and erector housing. I've done my best to photograph the slight damage it has. It's only cosmetic and does not interfere with its functionality.

2. There is also a very small ding to the scope bell. It took a bit of the finish off but I cannot tell that it is dented in. It appears to only be surface.

3. It also looks like the the objective lens has a very small scratch that runs horizontally. I just noticed that right now while photographing it. I do not think I have ever noticed it before while looking through it.

I am asking $1,800.00 plus shipping & insurance. I prefer cashier's check, money order, USPS certified check and will ship once funds have cleared and been collected into my account after depositing said check.

I still have factory box and the things that came with it.






**edit to add**

Due to high presence of scammers, I will not message you. If you want this item, you can post here and then YOU MESSAGE ME to avoid a scammer making a fake account that mimics mine and messages you pretending to be me.

Vudoo custom carbon sinister build .22lr
No wait times and under direct pricing

Gen 2 Vudoo action black cerakote
Vudoo 40 moa rail
Large bolt knob
1 mag
Bartlein carbon wrapped threaded barrel 1/2x28 w cap 20” kukri profile
McMillan carbon fiber game warden 2.0 stock in woodland camo
Trigger tech diamond pro trigger curved & tuned
1 mag
Hard case for shipping rifle that they sent it to me in for shipping purposes only



100% feedback on the hide and references gun just don’t get used it’s mint round count was to sight in shoot a group with center X ammo and cleaned only (10 rds)

If your in the market for a factory Vudoo rig here’s a gem below their current pricing as well as no waits and the original company build has XL Vudoo T shirt atlas rail in package and Vudoo tool

$SOLD Plus label /insurance to your FFL that accepts from individuals with license in the box
If its needs to be FFL to FFL we can discuss. Feel free to make an offer

I won’t sell the barreled action or just the stock save the time asking

Scope and rings have been sold and previous listing deleted

Not sure if this is the right place for this but I doubt anyone else other than a precision .22 shooter would try and set up the EL Range for rimfire

I have been trying to set up the Swaros for NRL22 and can't get them to give correction (it just flashes "MRAD")... has anyone had success in getting them set up for .22? I'm curious if the data range is outside of Swaros software?