Unbecoming!

Login to view embedded media

I saw this on TV this morning at a news conference.
LASO Sheriff Luna and LAPD Chief McDonnell are both carrying 1911's.
Stainless, beavertails, ambi safeties , exteneded mag wells, fixed sights.

Selling my hunting rifle. Weight as pictured is 5lb 8.6oz. Has seen 60 rounds total. Don't give up velocity and suppressor compatibility to get a lightweight setup. Velcro on stock is from a 2 round holder. I can remove it if you don't want it on there.
Components are as follows.

Defiance anTi (nitrided)
Proof 22" barrel (60 rounds. Threaded 5/8x24)
TT trigger
Christensen FFT stock
Christensen FFT bottom metal

Buying this new from JA Outdoors (using an anTi-X because they don't sell the anTi) comes out OVER $3700. Save a grand and buy it all in stock.
$2450 Shipped
Please ensure your FFL will receive from an individual. Not looking for trades

More stuff up for grabs.no trades needed at the moment. Payment by PayPal f&f or add the fees. Prices are shipped.

I’ll have pics up soon!

Vortex 30% off cert from euro optics. Not gonna get around to using it. SOLD

Arken sh4 genII 4-16x50 mil/mil scopes in great shape! Box,bikini cover and sun shade all included. SOLD!

arken stuff…. A new set of flip it’s for the 56mm objectives,rigid mount 34mm 20moa,bubble level,throw lever. 70.00

Magpul prs genii in fde for an ar-15. Doesn’t have the rail cover. 120.00

Vortex diamondback tactical 4-16x44. It’s in fde color. Optics planet deal….. moa/moa…. SOLD

Vortex matched precision rings. 30mm lows. Also has the diving board mount. SOLD

This guy tried to intercept my payment for a legit purchase from a legit member on the hide. Watch out Brothers!!!!

Looking to sell my 10.3" DD MK18 barrel with gas block and gas tube. I recently pulled this barrel out of my upper and estimate it has at most 600 rounds on it. Crown appears to be in good shape as does the overall appearance of the barrel..... the gas block did get scuffed/ scratched up when I removed it as pictured. Sale includes the barrel, gas block, gas tube and gas block pin.

Asking $250 shipped

Preferred payment would be Zelle or PayPal

Does anyone know why the logo rings are special. I had someone that wanted them specifically a while back. Cloner boner stuff?

These are heavy I guess steel instead of ultra light

Gents,

Need this manual or zero instructions if anyone knows how these work. What I don't understand is this, 'once zeroed how do you reset the vertical stadia reticle feature which shows elevation in the lower right of the glass'. Neat scope - works well with a clip on thermal module I have - just need to figure out how to get it zeroed correctly.

Core

Looking to move this annealeez brass annealer. Sale includes everything pictured. Unit works fine however the digital display isn't perfect. It doesn't light up until you press a button so in order to set the machine you press the button, dial in the desired number and then it will maintain this. I can send a video to interested buyers.

Would prefer Zelle or PayPal payment

Asking $200 shipped

Hawkins one piece 34mm 1.27 height mount 20 moa with night bridge. Paid 343$. Will take 235$ shipped and insured.

I heard the USS Clinton's home port will be Epstein Island

The USS William J Clinton, and the USS George W Bush

Hey all - I'm running an AAC SPR M4 (which weighs 18 oz) on an 18" PSA .223 Wylde upper. I have no illusions about getting under 2MOA out of a PSA factory gas gun, but 2 or even 3 MOA is all I need out of this gun, which is for coyote at 150, maybe 200 yards, or less. I had a heck of a time getting it zeroed when I first put it together but finally got it to group well enough and took it hunting.

Since then, I have had two inexplicable misses and more troubles when zeroing a new scope. I have finally only today discovered (after years of frustrations) that the cold-bore shot is hitting 10+ MOA low. I know it's hard to believe that I didn't discover this until now, but when I was zeroing it, once I was able to get a decent 5-round group I was no longer concerned with where the first round may have hit, so I didn't realize there was an issue. Of course in hunting the first round is often the only round!

I talked to a smith about it today who said the problem was likely the skinny factory barrel, which was probably drooping under the weight of the can until it was heated up by the first round, then maintaining POI decently for subsequent shots. He recommended replacing the barrel with something thicker and mentioned Aero; they've got two rifle-length 18" .223 Wylde barrels, one fluted and one not - any way of knowing if they will be strong enough to clear up this first-shot-low issue? I like fluted for weight but not if it's going to contribute to this problem in any way. I wish I could give some specs on the current barrel but the item's page is showing 404 when I look at it - I could always reach out to PSA for the specs to be sure.

Many thanks, all - as mad as I am that many hunting trips have been compromised by a rifle that I was sure was properly zeroed, it is a massive relief to finally have an explanation! I'll rezero and hunt without the can for the rest of this season and hopefully have everything straight before next year.

Thank you for the advice!

I put together a MK12 Mod 0ish upper. I like my mod 1 better so never used this. Build as follows, 0 rounds on it. Asking $1200 shipped.

-GREY GHOST PRECISION FORGED UPPER RECEIVER
-BCM FORWARD ASSIST
-BCM DUST COVER
-BALLISTIC ADVANTAGE PREMIUM 18” SPR BARREL 1:8 223 WYLDE
-PRI GEN 3 MK12 MOD 0 HANDGUARD
-PRI GEN 3 MK12 MOD 0 SEAN SLEEVE
-PRI FLIP UP FRONT GAS BLOCK
-PRI M84 GAS BUSTER CHARGING HANDLE
-CRYPTIC COATINGS MIL-SPEC BCG
-DEAD AIR KEYMO MUZZLE BRAKE

For the BL550 press, it does not come with shell plate, correct? Just confirming as they didn't mention this in the "at minimum you need these things also" list.

Which means, I need to get a shell plate or a conversion kit. The kit includes the (metal) powder and the pins. Do I absolutely need those as it mentions that this powder funnel is to "activate the automatic powder dispenser", and I am manually measuring and pouring the powder in. Perhaps I need this so the powder doesn't pour everywhere and out the case? For the pins, I watched a couple guys on YT and they didn't had any pins attached to the plate.

Looking for loading 6mm Dasher with either as a single stage or manually index the press. That's the only caliber I am loading ATM.


Thank you everyone

Some good comments about how did the USDA let this go on for so long. There is supposed to be an inspection at each shift. So this wasn't the recent listeria issue; over 6 years!!!!!!!!!!!!

I'm wondering what Publix is doing now? Shitting their pants (pun not intended)? Looks like Dietz and Watson will be the new "go-to" for me.

Mini Fix action and bolt (223/300blk) - $1800

*Folding stock and tool are sold*

Login to view embedded media
Post from Zeiss today. Looks like they’re available now. Excited for these!

See attached photo. I have this FLIR, it has a 640 core however the display is really small and hard for me to see so I rarely use it. I have finally rigged up a little battery powered monitor and an analog to digital converter so I can run the thermal image on the display. Id like to set the entire thing up on a small ball head tripod and maybe mount the monitor / battery / converter onto one of the legs, or maybe get one of those articulating arms?

Both the FLIR and the monitor have tripod holes in the bottom. The converter requires a small amount of power, it can either be powered by drawing from the monitor's USB out, or I have discovered I can use a little battery / power hub to power it.

Would really like to be able to keep most of the stuff attached to the tripod so I can just grab the whole rig and strap it to my backpack.

Gen 2 Ruger American ranch 16” fluted 300blk with vortex viper pst 1-4 mil reticle, vortex rings, adjustable kydex cheek piece, rearden SPB muzzle brake, extended mag release, Harris 6-9” bipod and 10rd pmag. By far the quietest gun I own, only about 100rds through it. $715 shipped to your FFL. Selling as a package, will not separate. NO TRADES.

I’m not sure why but I was under the impression that reloader 16 was temp stable. I’m shooting it in a 6.5 Creedmoor and I lost 75 FPS from 100°F to 55°F today. I know that even the temp stable powders lose a little bit, but in my opinion, that’s pretty drastic what say ye sniper hide?

They're upping their game, or maybe they already have been doing this.

I posted PM sent on a FS item, and was contacted almost immediately by sumilily with a shitty cut and paste of the OP photos/image. It was reported immediately.

I hate fucking scammers and crooks.... well and Dems and Socialists too.

Can you guess what kind of dogs they were?

Shh, audiance...
Here's a clue, a picture of the owner.

‘Tragedy beyond comprehension’: Boy, 8, dies after dog attack near DeLand, sheriff says

The Volusia Sheriff’s Office said an 8-year-old boy was killed by a pair of dogs north of DeLand.

www.wftv.com

from the Live Free or Die State!
New to precision long range shooting but a longtime gun owner and active on the range. I joined mostly to learn, but to also engage with members to discuss anything from politics, to best cartridge for xyz, to deep-dives on ballistics. Eager to jump in the deep end!
Cheers,
Michael

just sold 1, and found another BNIB..

See post below with what I have left.

Looking for a set of badger arc or NF 30mm low rings. Anyone got a set gathering dust that need a new home?