Nice Ruger Super Redhawk Alaskan in 454 Casull. Locks up tight. $975 shipped.

One time used. Brand set with box baker wings.
180$ shipped

Area 419 30mm Match scope rings. Medium height. Comes with accessory rail. $190 shipped

SOLD

Leupold Mark5HD PR2 180222. Less than 200 rounds on it includes box and everything that was in the box. Mount could be had for additional$. $1700 for scope shipped

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

Brand new Timney Trigger #402 for a Winchester 70 MOA.

Bought the wrong trigger and by the time I went to install it, it was too late to return.

$100 Shipped
PayPal F&F, Venmo or Zelle for Payment.

Like new Pulsar Helion 2 XP50 Thermal Monocular. Comes with everything you’d get new. Charger, carry case, boxes, etc.

Very little use. Works perfect. Got a new set of XT50 Binos is the only reason for the sale.

$2200 shipped insured to your door.
Call or text me would be quickest way to get ahold of me. 815-878-8255
Located in north central Illinois.

I’d prefer PayPal F&F.

Used but in great condition Wheeler 1" and 30mm scope ring alignment and lapping tools. Made out of solid steel. The 1" set does not have lapping compound with it.
30mm set is sold
$70 shipped for everything or $40 each shipped to sell them separately.

Happy New Year everyone! Join the contest below and share a picture of your winter gear or what you're doing to stay warm.

We'll be running the contest until January 20th, whichever post has the most reactions wins and you can post multiple times.

Winner gets: a Sniper's Hide hat, shirt, and a few stickers

Good luck everyone!

Reduced price down to $300 shipped....Slightly used and in excellent condition Forster co-ax with all the extras it come with originally plus an extra set of s jaws and a bunch of c-clips. Press was cleaned as well as the guide rods cleaned and lubricated after every use. PayPal preferred

TS Customs / CRB Prefit Barrel for Impact 737
6BR - Alpha Reamer - .120" FB
28" Competition Contour
5/8x24 Threads
7.5 twist

$625 Shipped (CONUS)

I picked this up with the intention of building another rifle, but this endeavor will just be an unneeded distraction. I can include some Alpha 6BR brass, new, for another $110. The brass is not available without buying the barrel.

2x rhino mounts (40 each) and 2x baseplates (20 each)

Black sold. 50 bucks takes the rest

What you see is what you get,

Take it all for 85 shipped conus

(2) Brand New Razor LHT 4.5-22x50 MRad

$1250 each shipped lower 48

PayPal F&F

The other day I had some Zelle money transferred to my bank from my friend’s sister living in florida. She asked me to give this money to her sister in Colombia when I fly there.

In Cartagena, I made multiple ATM transactions to collect pesos for my friend.


Upon my return entry into USA , ICE agent asked me if I had any food items to declare. I replied none. Then he saw something on his computer screen and asked me how much money I was carrying.

This caught me totally off guard because in my 30 plus years of international travels for both work and pleasure I have NEVER been asked about money.

I replied with the amount I was carrying (under $10K) and he handed me my passport and I proceeded through customs and into airport for my next flight to DFW.


Strange coincidence indeed

I’m wanting to put an Area 419 12” Arcalock rail on my rifle and wanted to see whether or not a regular Arca clamp will work with it. I have a fatboy tripod with an Arca ball head clamp on it. I have a few other rifles with Arca rails that work with the fat boy clamp so not wanting to change the clamp for just one rail.

Anybody experienced a definitive yes or no when trying to use Arcalock rail with Arca clamp?

Thanks

Selling a black with camo sponge pattern stockys carbon fiber stock.
Fits rem700 and clones. Ejection port opened to match an origin action. Milled for an M5 bottom metal. Has t nuts install for an Arca rail. Used for a few hunts.
Selling for $375 shipped, Venmo PayPal or cashapp.

Looking to get my own 300 Norma reamer and was wondering what freebore would you guys recommend andmhad good luck with for the Berger 245 Hybrids and 230 Hybrids??

I really want to run the 245s optimized to run through a CIP magazine. I have zero intention to run anything else other than these 2 bullets from Berger, much appreciated for your experience and thoughts!

Schmidt & Bender 3-20x50 pmii lp2.be p4fl2-moa, original box, cleaning kit, manual, receipts and all. Comes with original tenabraex flip up caps. Glass is super clean, body has a couple knicks as you can see in pictures. Everything else is flawless. Can provide any other pics upon request.

Priced to move, asking $1900. If my price is off feel free to offer. Scope will come with all original equipment plus some 34mm Seekins low rings, and a vortex bubble level if interested. Payment through PayPal f&f, or cash for meetups local to WA. Can ship out today expedited shipping on me.

All of that being said, I’m open to trade for a Nightforce ATACR 7-35x56 MIL-XT or other MRAD offerings, or a Gen III Vortex Razor 6-36 MRAD. Can add cash on my end if price is off.

*Was just made aware there is somebody impersonating me trying to collect payment from people commenting here. Please be vigilant and report that account please*

*SOLD*

I’m putting a m40a1 together on a repro smear and was curious if who knows the screw sizes needed for the m70 bottom metal? I’m trying ti and source screws but I don’t know the thread pitch, length etc.

I’ve spent a fair amount of time combing the older m40a1 build threads and most the builders people used have retired. I’d like to have this coated in black oxide. Any suggestions who to send this off to when the time comes?

I am looking to obtain the Zediker books, primarily related to reloading. Website and Facebook appear defunct. Amazon unavailable. I believe Mr. Zediker may have passed? Any leads on getting his books?

Zeiss conquest hd 15x56 in as new condition.
Six months old and only made 5 range trips.

Looking for an impact SA RH magnum bolt. Looking for either 90 or 75. Don’t really care - going in an NBK

Let me know what you have. I can trade a 308 bf if needed. If not interested, I’ll purchase

New lapua 300 prc brass 100 box.
Unfired.
SOLD

ALL SOLD

2 x Aero Precision Barrel nuts with wrench - $50 40 shipped each
2 x Aero Precision Solus Trigger Hanger kits - $25 15 shipped each

New/never used

I saw this and was wondering if anybody has used one before. Maxim Roller delayed buffer for an AR9.
Says it has a softer recoil than a regular blow back. Also says you have to take the weight out of your bolt.
Seems like it might be a cool upgrade for not a ton of money.
I have shot a JP5 and the Sig MPX and liked them both because of how little they move when running.
Login to view embedded media

I was looking for a load for 190gn SMKs. I wanted a powder with a little more top end than H1000 or 4350. Since I couldn’t find any Reloader I decided to try N560. It looked good on paper (Sierra loading manual). I did find a recommended load of 67gn which is .3gn below starting load. I loaded up a few rounds to try out. Components were: 190SMK, N560, once fired Federal Mk 248 brass, and FGGM magnum primers. The group and velocities were pretty close until the last shot where I shot my suppressor cover – that dropped the velocity 200fps. Average mv was 2869.5fps. According to the manual this is what I should be getting at 72.6gn. Primers were flattened but still had rounded edges and no cratering. I loaded up 10 rounds of 67gn and a ladder going up .3 grains per step. This time I brought a new 300WM that had about 40 rounds through it - basically the same barrel – both 23.6”. This time the average mv was 3126.6, ES 10.8, and SD 3.5. The primers were flattened and slight firing pin cratering but no wiping or heavy bolt lift/extraction. 3126fps is higher than any published load in the Sierra manual. Needless to say, I didn’t shoot the ladder. The 10 shot group was 1.2” including 2 fliers. Minus the fliers the group was .34” @ 100yds. Unless it was due to more resistance from the barrel, I haven’t a clue why the velocities were that high or why the difference between the two guns. My other 300 has less than 200 rounds through it so I wouldn’t think it would make that much difference. Since it is military brass I should be able to go 1gn below starting load without worrying about a flash detonation unless that is what is causing the primer flattening and cratering. Does anyone have experience with N560? Velocities, SD, and ES were measured with a Garmin C1 Pro. Thanks E_T_G