New to being a member here, have read alot of posts in the past for info though. Thought I'd join and contribute to the site finally. Hopefully I will be able to learn some new tricks from the members.

Live in California, been shooting and hunting most of my life. Recently getting into longer range shooting and reloading. I really enjoy any pistol shooting and precision rife. Thanks for having me, see ya out there

I have a Steiner c35 clip on, that I would like to trade towards a rh25/pfn640. I will also hear other trade offers. Thanks

R700 short action with standard bolt face,also PTG magnum bolt and a spare firing pin assembly. Serial number starts with RR.Plug aftermarket recoil lug. Plus bolt release piece and spring. Two complete bolts plus an unused (not sure the manufacturer-its the one with the blue ring. ) firing pin assembly. can only ship to an ffl- from an individual. Paypal friend or Venmo $475 shipped.

Hi everyone,

The 2025 Competition Dynamics season is posted. This year we have the STEEL SAFARI, BURRIS OPTICS TEAM CHALLENGE, SNIPER ADVENTURE CHALLENGE, and the TEAM SAFARI. Dates and signup at http://competition-dynamics.com/

I’m curious if anyone has bought the RR version of these and run them without the end brake attachment? I was wondering if it’s worth having the RR version for earpro shooting target sessions but then having the option to leave the end off for maximum suppression, say hunting with my kids?

I have a Vox-S with the Rearden Atlas Mount and it is currently torqued to 35 ft lbs with anti seize. Everything works great. I only shot a few mags through it.

With that being said, should I use Rocksett? Is it a necessity? More harm than good? Just trying to decide if leave it as is or put a drop or two of Rocksett on threads and torque to spec. Thanks.

18” PVA, 6.5 Creedmoor, 8 Twist, Marksman contour, Nucleus Prefit with shouldered Barloc cut - $325 Shipped conus

Less than 200 rounds on it per the orignal owner. I bought this and never even torqued it down to use it on my action.

Comes with a spacer that should allow it to shoulder to arc actions without the Barloc. (Say should as I never ended up using it)

5/8x24 muzzle threads.

Pm me with any questions, trade offers etc

As the thread title states.

I have a set of perfect condition Seekins rings. I am asking 110.00 for the set. Paypal, Venmo, etc. Send me a message.

I’m putting my Tikka T3x in 6.5 PRC up for sale. It can be had in any combination of what I have below. The rifle has less than 10 rounds through it and is like new.

T3x Stainless 6.5 PRC in factory stock - $700
Stockys VG - $425
Rokstok - $650, new and never mounted. It came to me a little rough from UM
UM Rings 30mm low - $100
Maven RS1.2 NIB - $1100
Leupold VX5-HD 171714 - $750

Selling a used bcm mcmr 13 inch handguard. It’s been on my rifle for about a year and has some marks from where I had a qd sling attachment and a piece of pic rail installed. Other than that it’s in great condition. Will come with all the hardware needed to install it and a sling qd attachment as well as a piece of mlok pic rail. All the installation hardware is brand new. I replaced this handguard with a fde mcmr and just reused my old hardware. Asking $110 shipped. Venmo only.

Condition: Excellent, well-maintained with minimal signs of use.

Specifications: 80mm ED objective lens for sharp, high-contrast images; durable, weather-resistant design; compatible with various eyepieces for versatile magnification options. Includes XF Zoom 20-60x Eyepiece.

delivered and insured (REDUCED)
PP F&F (or you pay the fees) or Venmo

I have some CCI primers excess to my needs, looking for face to face sale local to Colorado Springs area:

CCI #400 Small rifle primers total of 5,000 asking $370.00 ($74.00 per brick)
CCI BR-2 Large Rifle primers total of 2,300 asking $OLD!

Does anyone here have experience with the Ops Inc style collar system?

I'm putting together a Gordon-type, and I wanted to run this BOM by someone before I start accumulating parts:

H&R C7 Upper Black
Criterion HYBRID 12.5" Barrel
Non-F marked FSB, .750"
OPS INC™ MK12 MOD ? SPR Collar... long or short? Is it just aesthetic? I think short.
Ops Inc Brake - LONG (AE just dropped a helpful video on this and I prefer shims to time)

I want it to be setup like the 9-hole Reviews Gordon vs clone correct with the 3 piece collar... and even though I'm using the lightweight OCM5, I'm not sensitive to barrel weight and prefer a more rigid, heavier barrel for anything that gets a suppressor on the end.



I think the collar requires .750, and the Criterion has that at the gas block... but it steps down slightly- is this a NO GO?




TIA for anyone who can help steer me in the right direction!

ISO Bushnell elite 3.5-21. H59 reticle or other. Used preferred.

“SOLD” Kahles K328i DLR SKMR+ Reticle. The scope is in brand new condition and will come with a set of Kahles flip up scope caps, Box/neoprene cover. $$$ shipped to the lower 48 , UPS adult signature required. PayPal F&F for the form of payment.

Possible Trades considered:
Same condition ZCO 4-20 10 MIL with MPCT 1X, 2X or 3X.

I will only sell to established Hide members that I can verify through their previous transactions and feedback.

@koshkin @wigwamitus or anyone else who understands this stuff - can you explain how any of the lower end (non-Risley prisim) thermal clip ons work with their base magnification not being 1x/unity? I see that the Armasight Jockey 640 is actually a 1x thermal, so by my understanding it would work well with a daytime optic as you would have all of the 1024 x 768 pixels of the screen to work with as you zoom in beyond 1x on your (presumably) LPVO. They claim it's good to 6x, which I imagine is probably at the very limits of usable.

Being outside the US with limited options, the DNT series of Hydra thermals sure look interesting, especially at the price they are going for. I did up a quick table below to see if I can understand how they work as none have a 1x/unity base magnification.


So the first couple of rows are the specs of the sensor and the display. I'm assuming that to get back to 1x for clip on use, the image on screen is reduced in size inversely to the base magnification - so using 2/3 of the screen for the HS635 and only 1/3 of the screen for the HS225. By my reckoning, that means that at unity, there are about 683 x 512 pixels for the HS635 image of the sensor versus a paltry 341 x 256 for the HS225.

Assuming I have that right, it would also seem to indicate that the HS635 would offer higher magnification before things become fuzzy on the daytime optic? I looked at the Jockey pixels and assumed at 6x (max recommended) you would have about 171 pixels horizontally (wow) so working back from that I figure the HS635 might get you up to 4x on the daytime and the HS225 a lousy 2x.

Am I understanding this correctly or am I totally off base? Seems like the better options for scanning (moderate base magnification) are lousy for clip on use and the good clip ons would be lousy scanners...?

SOLD

Athlon Helos BTR Gen2 2-12x42
Specifications in attached pictures.
Used but good condition.
No ring marks but some scratches on tube.
I have the box but no paperwork.
It's used, price reflect this.

$old
PayPal F&F, Venmo or Zelle for Payment.

Login to view embedded media

Responding to call of man with a gun, they saw a man and shot him to death, the man they shot was bold enough to be sitting under a gazebo in a public park. Unarmed and committing no crimes . That in its self is so suspicious they probably should have shot him on principle

Getting closer - at least they found a man !

The man they were looking was the truck they were were looking for dead by suicide. But can’t expect them to find both the correct vehicle and then the right person on the same call . 50/50 at best like the raffle!

For Sale:
F3R Mount
34mm
1.25" height.
0 moa

Used, good condition.

$200 shipped. PayPal F&F, Zelle or Venmo.

Came with a rifle but I'm partial to curve blades.
$215 shipped

Does anyone remember in the early 2000’s Unertl (or maybe it was leupold) had scopes with a cam adjustment built into the turret. Similar to the rear sight adjustment on the M16 with 100m detents.

I think IBA had these on M40 clones in that time period as well.

Where to find info/ history of these?

Overwatch precision gen 1-4 Glock trigger parts. All descriptions listed on boxes. Trigger spring is 6lbs. Ended up getting rid of most of my gen 4 Glocks. Not looking to part out.

45 shipped conus

What’s a durable and accurate chronograph? I can’t afford a top dollar upper end chronographs. Looking for a dependable and reasonably priced unit. Your pros and cons on the graphs will be helpful. Thanks

CPS

$575 SPF

Comes with what you see in the photo.

300wm 50rds down the tube, no modifications. Saw the woods 4 times, dropped a couple deer.

Groups well.

Great rifle very lightly used.

Comes with 1x carbon magazine

$sold