Running .223 rem with 75 elds.

On a loaded round , outside neck diameter is .248”.

After sizing (.247” bushing), my outside neck diameter is .246”. Then I run a .223” (actually measured at .223”) mandrel. The outside neck diameter is then .247”, but if I measure the inside neck diameter, I have .222”.

Is this considered .001 or .002” neck tension? Bullet diameter is .224.

Any suggestions?
Starline brass, annealed every firing.

As title says. Bought directly from Leupold. Has been fielded a few times but in super nice shape. No disappointments. Comes with box, sunshade, manuals, caps. Rings are 35-32 ARC. ( 1.26") $1600 shipped and insured for everything. PayPal F&F or Venmo. PM me directly on this, please.

Yes, I did a search, no results. Does anyone have a gen3 yet?
Compared to gen 2, is it worth the swap? I shoot lefty often so the left side charging handle isn't necessarily a good thing. The sealed upper is, and they are hella maneuverable due to light weight up front and very light weight on the back end. Having run lots of piston guns, I am a BRN180 fan, but not sure about the gen3 just yet.

1. MDT short mag metal 7 round (holds 8 no problem. sold
2. MDT short mag 3 round metal $70 sold
3. Accurate 300 WSM metal says ten- holds 8. $50 shipped. sold
All work great just leaving the caliber.
Paypal friend or Venmo

Stumbled across this on EBay and man it brought back memories.
I had one of these back in the 70’s when I was a young lad terrorizing critters in the woods of south Louisiana.
Wish it was a little cheaper, but looks wonderful.

Hey there, hopefully you guys can help me. I recently bought a McMillan a5 stock for my Remington 700 .308that’s cut for a mtu barrel. Now that I have the stock on the factory barreled action (sps varmint) it looks kinda goofy being so small. I’ve recently looked at getting a new barrel for it and debating between a krieger m24 or waiting to try and find an actual mtu in stock somewhere. I can get the m24 shipped to me today but not sure if it would also look really small in the mtu cut stock. Any info or help on this from anyone?

Looking for the best place to get a barreled action. Preferably a 22-24 inch barrel threaded 5/8x24, right hand action, with or without a trigger. I have a chassis already in 700 platform LA

I currently have a bergara premier in 300wm and I put it in a AG composite stock . It’s a good 1/2-3/4 moa gun but with a 26” barrel and gen 3 razor it’s ridiculously heavy . I saw where I could buy a barreled defiance action for a reasonable price , and was wondering if I threw that into a AG stock would I have to get it bedded or sent to a gunsmith to make it work ?

Hey boys,

I’m looking for a gray PSO 1M2 or POSP 4X scope with an AK style mount (not SVD).

Thanks!

Selling off more business inventory


I don’t remember the brand, two blade styles round end or squared off


Each is 50$ 45$ shipped

I have a barely used PLRF-25C that has prob 10-15 minutes of use on it, always kept in the nylon case. Perfect for ELR range finding as I have personally gotten this out to 7400 yards on a stop sign on the side of the highway. Comes with the original box, all cables for hooking to PLGR/ DAGR if you happen to have those items, plus cables for hooking to laptop all shown in pics. This does not have Bluetooth.

Looking to trade for a high end spec WP PVS-14

Selling off my business inventory.

2x AKC Italy Knifes

Asking 200$ shipped for the pair

.

Just wonder for people having experience with Lapua's 338 norma magnum brass, how many firings would I expect to have if
1. I don't do hot load, would probably stay around 10-20% under maximum charge
2. Annealing after every firing

Would 10 or more firing something realistic for 33 cal magnum calibers with annealing?

Thanks

For sale as title says. Pristine condition- mounted and zeroed only. Comes with everything Nightforce sent from the factory. Perfect. $2400 shipped and insured. PayPal F&F or Venmo. PM me directly with question, please.

Selling off some inventory from my GlowForge business that I am shutting down.

I can engrave these if needed but I really don’t want to.

Selling 2 survival hatchets they have a compass, knife and window breaker attachments, fire flint striker in the handle. Blade has a hammer on the backside.

Asking 100$ shipped for the pair.

GONE

Hi friend
Eotech and mount for $550 ship.
like brand new, without any issue just use it once at the range.
Payment accept: Vemo, Paypal,Zelle
any question 310-357-6026
thanks

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.


First Spear Slick - Ultra Lightweight Plate Carrier -SAPI Cut, Medium, Coyote Brown, new never used - SOLD

More Information HERE

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.


Sold

Selling off one of my duplicates. This rifle had enough rounds through it for me to feel comfortable of it performing (1 case Black Hills and 1 case Hornady TAP).
LMT MARS-HS with 15.3" handguard with LMT MRGG-S 20" 1:7.5 6.5 Creedmoor barrel. Barrel has a Surefire .260 buzzle break, sku: SFMB-260-5/8X24 with a Surefire 260 RC2 mounted on it, on a form 4 in Colorado. Rifle has D. Wilson Arca rails cerakoted to color match. Also included will be a Harris bipod with RRS Arca/picatinny adapter.
Optics package is a Nightforce ATACR 7-35 F1 with a Tremor 3 inside a Nightforce 34mm 1.54" mount with a RAP-I bridge, and a Trijicon RMR HRS mounted on a 34mm Laure ring.
Night vision is an L3 PVS-24LR with a min 2600 WP spotless tube, with about ~5 hours of use total.

Rifle will ship in a Pelican 1760 to your FFL. NV will ship directly to you.

Looking for 18.400 shipped, will consider a partial trade for ARGUS APNVG goggles.
24LR- 10.5
NF ATACR/RMR package- 4.0
LMT MARS-HS- 3.9

Thank you,
Nick

I have a Proof 6.5 MTU SS Blank. Looking for a 22cal blank for trade.

What ones have you had luck with I see them from $300-1000+

Maybe she only speaks jive.

Cumswalla Harris would have at least blamed it on Trump.

Login to view embedded media

For sale Manners PRS TCS Competition stock. GAP Camo. Mini chassis. RH. Short action. Adjustable cheek piece. Weight tunable butt stock. Flush cups on both R & L sides/front and back, as well as bottom of stock. MCS Steel Arca rail with 3 out of 5 weights. Extra butt stock weights and spacers for length of pull. Price $1300 shipped TYD.