I am selling a Zeiss LRP S3 6-36x56 MRAD in excellent condition. The glass is flawless, and there are no ring marks. The scope will ship with the throw lever, bikini-style scope caps, sunshade, and Zeiss flip-up caps.

I am asking for SOLD shipped.

I accept Zelle or PayPal (Friends & Family). Feel free to check my feedback! Buy with confidence. PM me with any questions.

My Athlon Helos arrived today, and tomorrow, Vortex Pro rings.

I am used to lapping my rings, but I thought smarter people here might have something to teach me: is there any point in lapping rings for a .22 that will not be used at distances longer than 100 yards?

I know I'll end up lapping them no matter what. It will bother me if I don't.

Accutac FC-4 G2 arca


Comes with spike feet

Used 3-4 times


300 shipped lower 48 PayPal ff

Alpha Tarac 2.0 Prism

Flip mount 9 moa (2.6 mil)

Great for second zero, 300blk supers vs subs

Pic rail clamp attachment

2.26” height or remove riser for 1.5” height

Sold shipped

Leofoto tripod with head

Super custom tac table and stickers included


300.00 obo shipped lower 48 only PayPal f/f

I'd like to know about the three differences I see between factory match and our handloads.
1. Why do we have to chamfer necks but some of the best factory ammo out there does not? How do they get away with it?
2. Why does factory ammo have a ton of neck tension, but we're all kinda pressured to do 2 thou of tension? I hear from a few people that they run 4 thou and have noticed better groups; should we all be running at least that much then? When I try to pull bullets out of factory rounds to experiment, it's always really hard. When I pull mine, sometimes they're really easy.
3. I heard that a ton of neck tension increases pressure; does it? And by how much? Asking that because I pulled down some old 8mm Mauser ammo from Yugoslavia, and it was soo difficult I had to break the seal (due to the asphalt looking stuff) with a seater first, before any of the bullets would pull. Are those rounds experiencing a massive pressure spike because of that?

AIcs magazine inserts with hook on both sides. Works with any pouch that has loop on both sides. Asking $25 shipped.

Tacom HQ Charlie Tarac and Delta Tarac

Attaches to pic rail and aligns with 1.5” centerline scope mounts

Comes on a Bobro dual clamp mount

Also comes with a single clamp Bobro for running the Charlie only

Very low use, great condition
Sold shipped

Vanquish PMR Rifle​

- Black Vanquish Chasis
- 2024 December
- MPA Elite Action aka Coup De Grace from American Rifle Company
- MPA 25 CM Creedmoor barrel 200 rounds through it
- Glass and bipod are not included.

I will consider splitting up if barreled action sells first.

$2600 shipped or make an offer

I have a like new Tract Teoka HD up for sale. It’s a 4-16x44 in a one inch tube. Has a locking side parallax that adjust down to 10 yards. Comes with the T-plex reticle. Made in Japan and the glass is awesome on this scope. It’s like new and in excellent shape. Comes with box.

$450 shipped to the lower 48. Zelle preferred but will take PP gift or USPSMO.

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

Primary Arms Compact PLxC 1-8X24 FFP Rifle Scope - Illuminated ACSS Griffin MIL M8 Reticle - Comes with the One Hundred Concepts Scopecap Pro with ARD (Mount and RMR not Included), It was mounted and zeroed. Has box and all of the items it came with - SOLD​

Longshot 2 Mile Target Cam LR-3

Comes with 2 cameras and 1 receiver

3 tripods, 3 charging cords

Great condition and function

Very little use

Purchased from Midway

SOLD shipped

A couple items for sale. PM with questions. Paypal F&F preferred, but other discrete options possible.

1. McMillan Game Warden 2.0 for Tikka. Inlet for CTR bottom metal and Proof Sendero barrel. Molded In Camo, Carbon edge fill. Weighs under 32oz. Excellent condition. SOLD
2. Tikka CTR Bottom Metal and Action Screws - $50
3. 2 qty Tikka CTR (308, 6.5) Mags - SOLD

The stock and bottom metal for $575.

I am selling a BT5-H Atlas Bipod, model BT35, with an Area 419 ARCALOCK clamp.

I am asking for $SOLD shipped. I accept Zelle or PayPal friends and family.

Feel free to PM me with any questions.

I am selling the following magazines:

SOLD 3 L3I Elite Rimfire Magazines** for SOLD (shipped)
SOLD 3 Vudoo V22 Standard 10-Round Magazines** with Hoz & Shield +6 extensions for SOLD (shipped)

I accept payment via Zelle or PayPal (Friends & Family).

Please feel free to send me a private message if you have any questions.

Southern Precision Rifles
26" Bartlein SS M24
1-8 twist
5/8x24

Only 40 rounds fired, moving to a carbon fiber barrel for hunting.

$700 $650 with Hellfire brake

Trades:
SA TL3/SR3, Carbon Prefit (22CM, 6CM, 6.5 PRC), NX8 (Mil-R or Mil-XT)

Selling my used B&T SPC9 PDW, comes with 3x 30rd mags, it comes with the telescoping stock assembly with upgraded buttpad as well as the assembly that allows you to run any style of AR brace/stock (which was actually kind of a pain in the ass to get from B&T)
It has a Die Free Co. grip instead of the stock one.

Round count is sub 1k, shoots well, recoil is light and it does run the KCI metal lip mags perfectly as well.

I also have the SQD compact 9mm suppressor on a form 3 (I'm the dealer) if you want it as a package deal.

If you have any questions feel free to ask.

Asking
$1700 shipped for the pistol with mags and spare tele stock.

Just complaining I guess. Anyone notice other forums, particularly accurate shooter, has a forum boss that is a little bitch? If you voice your opinion over there or say something he doesn't like, it gets taken down immediately with no explanation?

People complain about others not contributing to the site and they wonder why people don't. I've never seen a group of such sensitive men in my life. The testosterone levels over there need to be studies for extremely low levels.

I recently picked up one of the new Custom Shop Ruger 10/22 Rifles at a damn good price.

Looking for a cheap optic (Under $500) to top it off and came across the Helos BTR GEN2 4-20x50 APRS6 FFP IR MIL.

I have no experience with these Scopes, but on paper it checks all the boxes and at $450 seems like a solid option.

If anyone has first hand experience with the above scope I'd love to hear your guys's experience and opinions on it.

I ordered a Manners stock from a vendor, and it arrived with some damage to the front end. The shipping box was in pristine shape and to my untrained eye it looked like it may have left the factory that way, so I pinged Tom here via PM with some pics and just let him know he had one that may have slipped by QC and that I would work with the vendor to get it returned.

Tom called me on Friday evening after looking at the pics, while prepping for a show in Atlanta and the blizzard this past week bearing down on KC. He walked me through why he thought it probably was shipping damage, perhaps on the way to the vendor, and refused to let me go through the somewhat slow process of working a vendor return. He pulled the same stock they had ready to go up in their online store and had it UPS'd to me this week, with a label to return the damaged stock directly to him.

Thank you @tmanners for the excellent customer service, and taking the time to work a customer problem that wasn't necessarily on you to handle.

I am selling an Area 419 weighted Arca rail. It is in great condition, with only minor wear spots in the channel where the bolts are mounted. I am asking for SOLD, including shipping. I accept payment via Zelle or PayPal (Friends & Family). Please feel free to PM me if you have any questions.

This always seem to to be one of the most divisive subjects, where everyone thinks they have a secret trick but nobody can prove why their method is any better.

Having watched the era of the homereloader annealing cases begin and reloaded my first seveal thousand cases in an era before it started. I always wonder when people talk about annealing and what it does for them. How many rounds they reloaded before they started annealing. How many firings they were accustom to getting out of a case. How often they were splitting necks. As compared to the present.

I routinely made it to 15 without loosing more than a couple to split necks before I started annealing. I rouitey had acceptable verticals out to 1k without annealing.

I would guesstimate I split less necks now by a little. I split a couple necks in some 7-8x 6 arc brass recently. I went ahead and annealed the brass and haven't split another they are at 11 now.

Could the temperature range to get acceptable results is much wider than people think? As evidenced by the fact that everyone says their process works. Is it much easier to do than people make it out to be?

In my opnion the most important part of the process is dealing with oxidation inside the neck afterward. After that most of us aren't shooting the diffrence anyway. I know half of sniperhides brass isn't making it past 4 or 5x before the pockets give out.

Thoughts, rants, dissertations, adhominem, poems, shit slinging, monkey sounds and slap fighting, all welcome here. I don't judge.

GPO CENTURI 3-12x44i Super Compact G4i Riflescope

At only 9.9" and just 18.9oz this scope is making a big splash in a small size. This quality riflescope is something you need to check out. Whether you’re navigating tight terrains or seeking precision in the field, the CENTURI 3-12x44i stands as the epitome of compact versatility and optical excellence, offering the ideal solution for those who demand both value and high performance in their optics.
Super Compact Technology at 9.9" long
SFP Capped ¼ MOA reset turrets
G4i illuminated I-Control reticle
GPObright lens coating technology
PASSIONdrop hydrophobic lens coatings
DOUBLE HD objective lens technology
Magnification throw lever

Unleash the CENTURI 3-12x44i Super-Compact Riflescope—crafted for high magnification and extreme compactness. At 9.9 inches, it boasts double HD glass, a G4i illuminated micro-dot reticle, and a fast-focus ocular, perfect for ultralight and compact MSR rifles.

Elevate your shooting experience with the CENTURI 3-12x44i Super-Compact Riflescope, meticulously designed for shooters seeking higher magnification and unparalleled compactness. At a mere 9.9 inches in length, this riflescope embodies the perfect fusion of value and performance.

Experience exceptional optical clarity with double HD glass elements, ensuring every detail is vividly captured. The G4i illuminated micro-dot reticle provides precise targeting, while the fast-focus ocular allows for swift adjustments. Tailored for short ultralight rifles and compact MSR rifles, the CENTURI riflescope delivers on every field-use feature sought after by North American shooters and hunters.

If you're looking for a quality hunting scope this is a scope you should be considering.

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

- SOLD - AI AX chassis for Rem 700 SA and clones. Like new condition, only 20rds have been through it. 15” handguard. Comes with the full length area 419 arca rail and anarchy outdoors thumb rest.

- SOLD - Ace stainless 6.5mm 5/8x24

- SOLD - Gen 3 APA fat bastard .22cal 5/8x24


- Brownells 18” 6.5 Grendel AR15 barrel, 1/8 twist, 5R rifling, mid length gas, threaded 5/8x24. Has a few hundred rounds through it. $100 shipped

- 300 BLK complete SBR upper. Aero M4E1 receiver, 10” BA barrel, 9” American Defense (ADM) rail, SOLGW gas block, standard BCG / CH. Excellent condition, only 40 rds through it. $400 shipped


Prices are shipped to the lower 48. PayPal FF, Venmo or Zelle for payment.

I am selling an MDT Precision Bottom Metal for a Remington 700 Short Action with a Badger M5 profile. This top-notch bottom metal features a barricade stop, a flared magwell, and an adjustable magazine latch. I had it on my Bergara rimfire, which I recently sold, so I no longer need this component. I am asking for $SOLD, which includes shipping. I accept payment via Zelle or discreet PayPal Friends & Family. Feel free to PM me with any questions.