PVA Rock Creek cut rifled barrel chambered in 6.5 CM. No longer have a Nuke so this needs a new home. Round count is 1632 and it still hammers. Mild load its whole life @ around 2740 fps with 140s.

6.5 CM, 24 inches, 5/8x24 muzzle, MTU profile. Coated in black alumahide. $125 shipped

Selling a clean Razor LHT 4.5-22 in Mil. In Warne Mountain Tech rings. Super light very clear nice scope. Push button illumination. Been on my Tikka only shot to zero and load develop.

$SOLD shipped. Pics coming soon. But it looks like all the rest

New, unopened bag of 30-06 brass. 100ct.
$50 shipped

I’m good on base and mid layers for matches. Anyone have some recommendations for cold weather outer layers. I’m in North Texas so nothing crazy around freezing or a little below is the lowest it will get.

I know we have quite a few Hams and radio enthusiasts on the Hide so figured someone might be interested in this receiver. It's a like-new ICOM IC-R75 communications receiver. Has lived its entire life on my office desk and seen little use. Works perfectly with no issues. No scratches, dings or dents. From a non-smoking home. Typical excellent ICOM quality, made in Japan. Really pulls in those weak signals when hooked up to a good antenna. Comes with original a/c power supply, box and owner's manual. Selling because it doesn't get used much anymore.

$475 shipped. Payment via PayPal FF or USPS MO. PM me if you have any questions.

Anyone tried anything like this?
Tired of chasing/replacing batteries and leaky batteries. A USB bank could power multiples.

2 new show model, unfired 1301 Comp pro. 24" - SOLD

Used but like New Nightforce ATACR 7-35 with Tremor 3 reticle. Glass and body are in like new condition.

It will be shipped in its original box and includes a sunshade, windage beauty trim ring, throw lever cap, and tool.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$2601.34

I am looking for a project stock of a Grayboe Ridgeback Rem 700 SA M5 stock. I don't need the bottom metal and barrel channel does not matter as I'll have to sand it out to 1.3" anyways. Let me know what you have.

Can someone tell me the torque specs on my Tikka Superlite T3x trigger? I had to remove it to send the barrel in to get threaded and I want to make sure I reassemble it correctly. Thanks

Just wanted to drop in and say hey from Ohio. Haven't joined any forums recently, and not sure if a post here is mandatory first (tried posting elsewhere and it's still pending).

Anyhow not new to firearns, as I've been collecting for 15 years, but just bought a scar 20s and first time I've considered longer distance shooting. Right now trying to decide on an optic (between a mark 5 or a nf atacr or maybe nx8 as the atacr is a little over budget)

And trying to source how people got an fde atlas bipod as I only seem em in black.

Either way thanks for the add, and hope I can learn a good bit here.

For sale is a 10.5” BAD Workhorse. Maybe has 200 rounds down the pipe. Will ship with Eotech XPS2 and KAC 600 Meter sights. Asking $1000 shipped

For sale is a ODG ceracoted V7 pro. Rifle shoots bug holes with anything quality and shoots shitty ammo pretty dang good, lol. Really consistent shooter. Will ship with original muzzle device. Asking $1200 shipped.

The title says it all; I've got a 3.6-18 PR2 and am looking to trade for the same in Tremor.

I'm interested in learning how to stick weld and would like a decent quality welder for under $500. What would you gentlemen recommend?

Ive done M16 extractor installs before on 700's with standard and magnum bolt faces. The process goes: take a standard bolt face factory 700 bolt, open it up, solder a nose ring, face the new nose, bore the bolt to a .223 bolt face, then cut the extractor groove. This has worked just fine with standard and magnum bolt faces, but when you bring it down to a .223 bolt face, the new nose covers up part of the ejector hole. How do you go about locating and clearancing for the ejector?

Were are getting screwed by Mexico big-time! I had no idea it was this bad. And now that deportations are coming Mexico is freaking out!

There is a new article out on The National Pulse website the details a lot of this. Link below:

Economist Accidentally Proves MAGA Right About Migrants In Mass Deportation Warning.

Mexico has no choice but to fight against deportations because deportations will put a severe strain on their economy. In essence Mexico can't afford it.

One example given in the article, which is probably the smallest problem for them - I quote:

"Economists are also cautioning that mass deportations could reduce the flow of remittances from Mexican immigrants residing in the U.S. The National Bank of Mexico reports that $63.3 billion in remittances were received from the U.S. in 2023 alone."

In order for that money to fly under the IRS radar, remittances would have to be smaller than $15,000 a year per person. Let's say $14,000. This means that to reach 63.3 Freaking Billion Dollars, 4,521,428 illegals would have to send at least one $14,000 check every year!

How many we got here? Not a sells pitch but given there difficulty to source and cost, and it looks like 10 rounders maybe having to go through customs to get them… working on a 3D printed magazine… just wanted to get an idea of how many of us are here, please comment if you have one and need more magazines OR have a good source for them.

Black rattle canned TRex arms Ragnarok outside the waistband holster for gen 5 9mm Glock. Comes with TLR1 HL. I used this with a Glock 17 and 45 with the light and both worked great.

Asking $135shipped OBO.

I Have had my Impact 4000 for about a year now. Overall I'm happy with the product. Recently I took the unit out for some training in winter conditions. 15 degrees F, light snow cover. Noticed almost immediately that battery life MAX was about 15 minutes, no backlight use. Also, when the laser was fired, the screen would go blank momentarily before turning back on and displaying the range. Once the Low Battery icon flashed the consistency/accuracy of the target ranges became very suspect and unreliable.

Has anyone else experienced these issues, or used their impact in very cold weather? I also understand that this is a CIVILIAN range finder and expectation of performance needs to be evaluated in extreme environments. That being said, up here in the northeast its very cold for months on end and I'd like to understand the capabilities of this unit.

Does anyone have experience using a higher end unit (MARS, Wilcox) in cold conditions and do those units perform similar?

Also for reference, I was using energizer lithium CR123A batteries that had been checked beforehand. The same batteries lasted all day in my Vectronix Terrapin/Kestrel. Thanks for any feedback!

WTB: 2 or more MDT control bridge/nv bridge for the ACC Elite Chassis. Prefer Black, but will take any color.

FDE, unused. Mounted and didn't fit my hand.

Passing it on from someone else who passed it to me. Yours if you cover the cost of shipping.

Price: $175

Like new RCBS Matchmaster dies for 6mm GT. Includes the .266 bushing that came with the kit, PLUS a .267 and .268 bushing. I have only used the sizing die to resize 8 pieces of brass. The seating die has never been used. I paid $168, plus tax and shipping, for the die set and $15 a piece for the two included bushings, and the .267 is the only bushing I used. Shipping included in price to lower 48. PayPal or Venmo only, you pay goods and services fees. I am located in Loganville, GA and can do local pickup too. No trades.

Send me a PM if you have questions or want to purchase. I do NOT use post comments to communicate with buyers.

Well it's that time of year again.

Sounds like Primary Arms is bringing out a replacement for thir GLX 2.5-10, not actually a rumor as it was all but confirmed here. Interested to see what this turns out to be.

I did read rumour that Tikka was coming out with a few competition orientated rifles, in particular a new rimfire model. Very interesting to see what this turns out to be.

I have an impact 737R action, a stuteville precision impact pre-fit and a ACE muzzle brake. I know it is good to use vibra-tite vc-3 for threadlocking scope screws. Is it also good to use it on thread while installing the barrel and muzzle brake?