Can anyone provide guidance here? I have no idea how to research the answer…

Looking a set of fury 5000 with AB. Let me know with you got.

Has anyone here had any experience with or know of a long action magazine designed for the 6.5 PRC? I have seen one advertised for the 6.5 CM. If not, has anyone used the long action for 6.5 PRC and how does it feed? My 6.5 CM feeds OK in the long action. Occasionally I get one round that gets stuck.

Looking for 50% or 100% TBAC cert.

For sale is a like new BOBRO 35MM Single Lever Mount, perfect for Leupold MK5's

SOLD

Venmo, Cash App or Money Order ONLY
Please.

Fore sale - bought them but ended up never needing them.

I am planning a “SPR/GPR” build and wanted to see if there were any upper receivers I should consider outside of the ones listed. I would like to use a monolithic, semi-mono, enhanced, etc. upper to reduce flex on the barrel. Ideally I would buy a mega mml but zev, in all their wisdom, decided to stop making them again.

LMT - proprietary barrels
Aero Enhanced
Seekins (these have large forearms)
Icon (former mega)
Ridgeline Defense (can you buy just a receiver?)
Cobalt kinetics
Sons of Liberty Gunworks
Vltor (key mod only?)


What am I forgetting?

Magview B1 (new) & S1 (used) mounts $125 for both. TYD

This is a great chance to try out (or get more):

-30 Cal 220gr FCP (Staring at 19.9 cents each)
-Nosler 64gr BSB (Free Shipping any quantity)
-Primed 45 ACP brass is nearly gone


Coupon code expires tomorrow at midnight

740 pcs by Weight. $235, plus $15 shipping CONUS.

Prefer discreet PP F&F.

Savage Elite Precision in .223

$1550 $1100 plus shipping

Also comes with an MDT Bag Rider, 3 mags, and an MDT M-Lok Data Card Holder.

*Bipod NOT Included*

Has 700 rounds give or take a few. Mainly been a bench/trainer gun. Shoots excellent with reloads and sub half moa with berger factory ammo.

Currently has a Burris XTR II 4-20X50 SCR MOA on it that's set in an ADM Recon SL 20 moa Mount. Will sell the scope & mount seperate for $400 plus shipping or I'll throw the scope and mount in with the rifle for another $500 $300 plus shipping.

Paypal F&F is preferred, can accommodate other payment forms though.

Willing to look at trades plus cash as well, just message me with what ya got.

Do I have any idea if these are any good? No, no I do not. Feel free to discuss in the comments. Nevertheless, I thought I'd share these deals with the Hide.

AIM Surplus has Armalite branded 16 inch Nitrided 416r Stainless barrels on sale for $89.99. https://aimsurplus.com/products/armalite-16in-223556-mid-length-ar15-barrel-12x28

1:7 Twist, 556 Chamber, Midlength gas. Came to $104.71 shipped for me.

While researching these for any information (I found none), I stumbled across even cheaper Armalite OEM barrels.

(Presumably) 4150 (listed as CRMO) 1:8 twist, 223 Wylde, Carbine Gas HBARs for...$50.

Came to $75 shipped. I still ordered one. I have no idea if they're chrome-lined, nitrided, or neither.

I have no earthly idea what I'm going to do with them, but for the price, I couldn't pass it up.

Looking for this in a tremor 3 reticle or tremor 5

This is BNIB never removed from the box and you can see the seal is still in tact.

Will sell for $1750

Just got this back from NF. Zero stop was frozen. Everything good to go now. Glass is flawless.

$1,800 TYD
PP FF

Vortex Razor Gen 2 with EBR-2C MOA reticle

It is in great shape without marks on the glass or scope body. There are no issues with the scope, just moving to MIL reticles so this needs to go. If you are not familiar with Vortex, they have a no-questions-asked lifetime warranty.

$1,450 shipped

For sale - I am the original owner, has sat in the safe for the majority of the time I’ve owned it. Light ring marks, the glass is flawless. Comes with everything but the original box.

---

---

---

---

---

---

---

Looking for a new scope for a new hunting build. Kicking around these 2 scopes. Can you guys give me some pro and cons between the 2? I haven’t ran a nf in about 20 years.
Thanks Bryan

For sale - New 26” 338 Proof Carbon Fiber barrel. $650. $30 shipping

For sale - 20” Carbon Fiber proof barrel. Bought it for a build and decided to go a different direction. $650 TYD

Anyone know of a good smith that has a .458 Socom Reamer? I’m ditching 8.6

APRS3 reticle. Scope body does have some marks on it but glass is clean.
$330 shipped.

I have not seen any threads with load information for this in a AR15 223/5.56. Hodgdon has load data, but I have not seen anything else. But pretty much, it loads with like .2-.3 grains more than 69 SMK Load data for near max.
I just got 100 bullets and will be loading up and testing 10 different loads in a Brux and Shilen barrel (AR15 223/5.56).
I will be testing using Benchmark, N135, N140, N133 and TAC probably to see if I can find anything accurate with it. Since this bullet is new, I feel like good ballpark loads are largely unknown. Unlike 77 grainers, where for 20 years, people are going to say "24 grains of RE15/Varket/N140" are the standard.

Anyone have any good loads in AR's with these bullets so I can get some good ideas of load area? I have every powder, so if its not on that list above, its ok. I will consider other options. I chose above ones, because those are what I would call "top tier possible choices" for the 100 I have. If I had more, I would include RE15, Varget, XBR, H4895 and maybe a couple ball powders like AA2230 and H335.

Thank you for your advice in advance

$70 net shipped, barely used. Any questions let me know.

Used
Just sits in my closet in a case for the past year, so using funds for a new project. Bolt handle has some blem/cerakote missing from use (I can send pics upon request).

- 6 lug model

-327 rounds down the action and barrel.

- Barrel is 24 inch bartlein 6.5 creedmoor rem varmint profile 5R 1:8 RH with a badger fte muzzle break. Threaded, chambered, fluted, nitride finish all done by RWS Gunsmithing.

- Comes with #20 & #30 trigger hangers, extra gap torch bolt handle/knob, and muzzle thread protector.

$1600 1500 shipped. Message me for more info.
I am willing to trade for a LMT MARS H 308 16 inch upper.

Don’t have my 338 any more so no reason for these to be on my bench

48- berger 300gr OTM - $50 shipped
29- Barnes 210 gr ttsx- $30 shipped
Or
buy both boxes for $75 shipped

Traded for
22 cal
Sierra 60 or 69 tmk
Berger 60 gr varmint
Hornady 80gr eldx
Hornady 62 gr eld-vt
Anything else just offer worst I’ll say is no.