Here is the 2025 Iowa Precision Rifle Match Schedule.


Iowa Precision Rifle Match is a long range rifle match series at the beginners club level. We focus on inviting new and beginner shooters into long range positional rifles shooting matches on a local level (PRS Style). At our matches we encourage experienced shooters to coach and help entry level shooters similar to a Pro-Am type of match. The IPRM matches include a Basic and Advanced course of fire. The basic course of fire gives new shooters an easier stage design or target size to help them learn basic shooting and competition skills. The advanced course of fire has more difficulty for the experienced shooters and for the basic shooters to work up to shooting. The ultimate goal is to have these new shooters compete in their first precision rifle matches and help them get better and more confident. We hope they will eventually compete in higher level matches like the Regional 1 day Precision Rifle Series (PRS) matches and possibly the 2 day National PRS matches.

Here is a typical Course of Fire

Like new in box MK6 3-18 with TMR reticle and .1 mil M5B2 turrets. It was previously mounted, very faint ring ‘sheen’, no other marks on the scope. Glass and function is perfect. Comes in factory box with caps, etc. also includes switch view lever in pics.

$1940 shipped, insurance is on the buyer if desired.

Morning. Long story short. Have a good amount of .260 Lapua brass from my last barrel that I was thinking about necking up so I could use it for a friends .308. Never necked anything up before and I have expander mandrels to go to .270 and then .308.

Are there any issues with necking up a case?

All prices shipped.

Kuiu Guide Jacket - Valo - Small - $155

Kuiu Superdown Ultra hooded jacket - Vias - Small - $160

Kuiu Superdown Ultra Vest - Valo - Small - $105

Kuiu Kenai Hooded Jacket - Valo - Small $215

Kuiu Chugach Rain Jacket - Vias - Small $210

Manners LRH - Short action - Right hand
-Elite black carbon
-High Gloss Clear
-Mini Chassis (accepts S/A M5 Bottom metal)
-Left side flush cups
- 4" pic rail
-3.5" arca or full length (properly tapped for both by manners)
-Perfect condition front to back
-Barrel channel cut to fit 1.250 a straight barrel

Asking SOLD - No Trades

Like new but I no longer have the 45 degree RAMP accessories for a side mount optic. Those are available for purchase from Warne.

$75 TYD

200 plus pieces of fully processed lc brass,ready to load
Primer crimp taken out with a counter sink bit,

Sierra 77 gn mk roughly 200 pieces

Sold

Not separating it

Selling a manners TCS in high plains. This has the sikes rail installed. It wil come with the following.

- Steel weight kit including the front stabilizing weight

- Two rear weights with 2 spacers

- Adjustable cheek knob as well as the standard one.

- Sikes clutch

- Action screws





Asking $1450 shipped.

Payment via Zelle, Venmo, PayPal. F&F or add enough to cover fees.

Let me know if you have a questions.

Dillon RF100 set up in Large Primer. Currently works, no issues, willing to facetime to confirm if necessary.

SOLD

Looking to sell my FN FNX .45 comes with everything from factory and has a cheap holster. 3 ten round mags asking $600 shipped to your ffl.

Hey all,

I'm installing a proof CF barrel on a kelbly action. This is my first time doing this and I have a question about torque specs.

Kelbly recommends a torque of 100 ft/lbs

Proof recommends a torque of 80 ft/lbs

Do I use one of the torque specs above or just pick a number in the middle (90 ft/lbs)?

Thank you in advance!

So this is kind of a question and a topic of discussion. I have a 3x vortex micro on my rifle, it's fine, but it doesn't give me much magnification obviously compared to a 6x. The 6x micro(vortex)seems to be stretching the capabilities of the current technology based on reviews I've seen, and capabilities are compromised (subjective I know).

The eotech g45 seems to be fairly well regarded in its balance of eye relief, size, weight etc, but is really expensive. The only other contender I've seen is the Sig Juliet 5x which seems semi capable, but the mount and glass quality isn't near that of the g45.

I would love to see another contender put something out closer to the eotech in quality and hit that middle ground between the g45 and Juliet 5 micro price wise; does anyone know if there is something coming out or already out?

Feel free to tell me a 3x is better or a larger 5 or 6x is better as well. Just coming from my use case and what I would like to see/wonder if something is on the way. Thanks!

Wondering if people are having better luck large primers over small primers with the 25 creedmoor?

One new the other shows minor signs of use
$150 shipped for the pair
Thanks

Norma 6xc lr Primer brass

108 2x fired

252 pieces 3x fired fully processed ready to load, Annealed, fls, trimmed

$old shipped

Have loaded 6xc ammo as well
Pm for details

All same lot. Prefer to sell as a lot sold to @Cmiller5

PayPal friends and family with no note.

New CAMPRO 30 Cal (308") 220gr FCP Bullets - with double cannelure for 300 BLK and/or 300 Win Mag Etc
$99.75 / 500 ct (19.9 cpp) (or $24.95 / 100 ct sampler)
(Load data available on our website)
https://ravenrocksprecision.com/30-...ith-cannelure-300-blackout-subsonic-updating/

Swiss P 300 BLK Primed Brass - Brand new primed brass made in Switzerland (with a norma headstamp)
As low as 33.9 cpp
https://ravenrocksprecision.com/300...ass-norma-headstamp-made-by-swiss-p-updating/

Free shipping over $150, norma (made in Sweden 300 BLK brass also in stock)

Login to view embedded media

Hi guys. I want to suppress two ARs (.223 and .308) with the same suppressor, and since i live in Europe the Ase Utra looks like a nice way to go. My plan was to get the correct caliber muzzle brake for both the 223 and 308, and then use the Ase Utra Dual 7.62 for both. I care most about low back pressure and recoil reduction, as i will be wearing double hearing protection anyways. These are quite reasonable priced compared to the bigboys (hux etc). Ive got loads of baffle suppressors that could be used, but i wish to minimize back pressure and be able to switch between muzzle brake and suppressor without adjusting gas block and minimum POI shift.

There is very little talk about these, has anyone experienced these or have anything to say about the Ase Utra flow suppressors?

For Sale

4 x Autel Evo2 v1 drones

3 of them are thermal (one of which is an enterprise package)
1 is a 6k day drone
The enterprise comes with a smart controller and a speaker and lights and a beacon (these last three are modules that plug in to the foretop of the drone).
.
I have 1 other smart controller that will work with any of the other 3. Whoever buys it first gets it.

I have 2 v1 live decks (pics pending). Go to whoever buys them first.

Total 14 batteries. Each drone will come with 3 batteries (how many they normally come with). The other 2 go to whoever buys them first.

Each drone will come with a stock charger. There’s a fifth charger that goes to whoever buys it first.

Each drone will come in its original factory hard case.

The 2 v1 thermal drones have FLIR camera, the enterprise has an IRAY camera.

One of the v1 FLIR drones has a customer remote chest carry rig.

If someone is interested, PM me. Tell me where you are (zip) and I’ll estimate shipping online with UPS (you can replicate to make sure I’m not cheating ). Then we will add that to the price. Shipping these dang hard cases isn’t free !

UPS Ground Shipping estimates

(A) V1 Enterprise $114
(B) V1 thermal $103
‘(C) V1 6k day drone $53
Thermal drone $3000
Day Drone $900
WIth hardcase, 3 batts, charger, extra props, regular controller
Smart Controller $500 (Enterprise comes with smart controller only, but has additional add on attachments)
Live deck $250 each
Extra Batt $150 each
Extra charger $25
Fox Fury $120 (exolander)
Fox Fury (lights) $25 each
Extra remote ($100)
If an accessory won’t fit in the hardcase, I’ll pay the shipping for that.

I’ll put up a few pics, but won’t put of pics of everything - too many pics. If you need more pics, PM what you need.

V1s are have no built in RFID. Bring your own RFID strapon.
V1 are a little less nanny on atti mode and hurrying RTB under certain conditions.

(I’m going all in on buying parts and assembling my own - to gain more interoperability)

PM for questions

Thanks for looking !


==
V1 Ent with Smart controller


==
V1 FLIR with customer chest carrier


==
V1 FLIR


==
V1 6k

I have two ARC M-Brace mounts for sale. Both are 0 MOA and both have a bubble level.

The 34mm is 32mm height

The 35mm is 38mm height

Both have never been mounted but I misplaced the brown wrap for the 35mm.

$225 for each, shipped to lower 48. PayPal FF

URSA NorCal - Sunday, January 19, 2025

Location – Clear Lake area (same as prior, coordinates 39°14'21.0"N 122°50'50.0"W)

Setup will be done late Saturday or early Sunday morning by our NorCal crew. Target(s) will be in place at minimum 2000 yards. IRIS hit-indicators will be in place and be the sole control for official hits and misses. The initial target distance for NorCal is 2147 yards, all California-legal firearms and ammunition are allowed, no weight restrictions, and no fees.

The Match Director will decide how many shooters need to be signed up to move forward with this event. Unless the event is formally cancelled (as announced on this and other posting sites), assume it is going forward.

IF you want to shoot multiple rifles, you need to complete a registration for each one. If you expect to be shooting with us more than once, I suggest you do yourself a favor and build a text file in your word processor and then just copy and paste. NOTE: IF you seriously think you will score 5 in 10 or better, please DO take the time to enter ALL the info requested in the Build Sheet section - will save me e-mailing you to get missing info and hasten getting results posted on the URSA site (News and Stats pages) and the non-Cal Guns sites. Thanks.

If you want to shoot this event, you MUST sign up ONLINE (see below). Registrations MUST be received no later than 1 PM the day before the event. There will be NO onsite registrations. Registration is required for all shooters, spotters, and anyone that will be on or in the general proximity of the shooting line. NO exceptions!

The URSA Official Course of Fire is at FAQ 13, near the bottom of this page on the URSA website - https://www.unlimitedrange.org/operations.html All shooter should review the course of fire prior to arriving at the venue. Substantial additional data regarding URSA events are included on the same web page.

Sign-Ups: URSA uses the online program, Zoho Forms, to capture shooter Liability Releases and Build Sheet data, and spotter/other Liability Releases – Liability Releases are signed and dated at the event. Please use the appropriate link at the top of the Activity/Event Schedule page (http://www.unlimitedrange.org/activity event schedule.html). If you have any problem with the online form, please e-mail me ASAP ([email protected]). BTW, the form asks for limited “address” info (only city, state, and ZIP), we do NOT need your street address.

Looking for a LH SA complete bolt w/ a 223 head. PT&G doesn't offer anything LH . ??

Been waiting over a month for a response from omr with no luck. So I pulled the barrel myself which I’m sure will void whatever “warranty” they promise. emailed them about a chamber cut terrible which they responded once. asked about shipping and it went crickets. How does something like this leave a shop? Anyone else have feedback from this place ? Definitely a custom rifle

I was reading it, went ti refresh and boom gone...............

Question - I have a 9 mm suppressor that I swap back and forth between my SBR and my Glock. When used on the Glock I install a Hub device with a piston but not when on the SBR. Is it ok to leave the piston in place and use it on the SBR? I have never seen this discussed. Thanks in advance for the input.