I just acquired the final piece for my GL/SSC build, an actual Colt M203 40mm grenade launcher! This is a factory original Colt M203 40mm, not a converted 37mm. The Daniel Defense GL/SSC handguard is also original, it's not a cut down M4A1 rail. There's a ridiculous number of rare parts being used on this build, such as the Eotech GL40 sight, unique tanodized KAC BUIS set, and the engraved patent pending PRI Gasbuster charging handle. I love this build and I'm happy to have finally finished it, for now. In the future I might add a transferable lower, but for now this is the configuration that it's staying in. It's a heavy rifle, but it's worth it to have something different than every other clone out there:




M203 and lower receiver markings, the lower was made by Intl.Mil.Co. before they got the cease and desist for using the H&R rollmark:



Original Daniel Defense GL/SSC handguard with a NavSea marked rotational WMX200 and LA5:
Here's the rifle without the M203:



Right now I have a CAG used Vortex scope mounted in a Geissele 2099 aluminum/lithium scope mount, but I'm thinking about switching over to the Eotech/Wilcox set that you can see in the photo below. Should I keep the LPVO or switch over to the red dot for this GL/SSC build?



Does anyone else here have a GL/SSC clone build? If so, please post it here in this GL/SSC thread!

Here's the parts list for my GL/SSC rifle. If you guys know your parts very well, you'll know how ridiculously rare some of these parts actually are:

● Colt AF marked upper receiver
● Colt BCG
● PRI Gasbuster machine engraved patent pending charging handle
● Intl.Mil.Co factory SBR H&R marked lower receiver
● Colt lower parts kit
● Geissele SSF trigger
● Daniel Defense 12.5" barrel
● Mk12 gas block
● SureFire 4 prong 5.56 NSN marked flash hider
● SureFire SOCOM 5.56 RC1 FDE silencer
● Daniel Defense GL/SSC handguard
● Colt M203 40mm grenade launcher
● Vortex Razor HD Gen II 1-6x24 with VMR-2 MRAD reticle, CAG used/surplus scope
● Geissele 2099 aluminum/lithium scope mount
● Eotech GL40 tanodized grenade launcher holographic sight
● L3 Technologies LA5 FDE laser
● WMX200 NavSea marked tanodized rotational flashlight
● KAC 99051 tanodized front sight
● KAC 98474 tanodized rear sight
● Insight RMT-400-A8 FDE dual button pressure switch
● Tango Down FDE vertical foregrip
● CQD forward sling mount
● CQD Gen 1 rear sling mount
● Ergo FDE grip
● Magpul Gen 3 PMAG FDE magazine
● LMT Gen 1 SOPMOD FDE stock
● KAC KM98722 SOPMOD stock QD slig swivel mount (not pictured, recently added)
● Aimpoint T1, military used/surplus red dot sight (not pictured, recently added)
● Daniel Defense 1 O'Clock offset picatinny rail (not pictured, recently added)

Looking for one of the above chambered steel barrels for an origin or solus

I am looking at a RimX in a WOOX stock. I have looked on WOOX web site, I can't find any info on adding a Arca rail. Can a Acra rail be added for a bipod. I do see Pic rails for bipods, but no Arca info.

You guys asked for a system that does not require a dedicated belt. Here you are

For sale: Brand new, unfired Elite Sand Accuracy International AXSR in 7 PRC.

I’m moving this incredible piece because I don't even have the time to shoot my AT-XC. I bought it from Mile High this past fall, and it's been sitting unused since then.

This rifle features a premium Proof steel 26" barrel with a 1:8 twist, threaded 5/8x24, plus a self-timing Tuebor 30 cal titanium brake.

It comes complete with the factory box and manuals. Please note that the bipod is not included in this sale.

I’m open to considering a partial trade for an Impact short action with a .308 bolt face and a 75-degree throw. I would also entertain an Atlas or Infinty pistol in 9 or 40. Don’t miss out on adding this top-tier rifle to your collection!

trade pending

Selling my lightly used takeoff barrel from my HK SP5, I converted mine to an SD so this is no longer needed.

Price: $350 shipped

SOLD American Rifle Company "Archimedes" short action / right hand receiver

Grabbed this and a 3-18 and decided to keep the 3-18, never left the house.

$550 shipped
Zelle for payment

Athlon Argos BTR Gen 2 6-24x50 like new with Vortex 1.26 rings SOLD
Bressor Condor German spotter scope, 20-60x85 like new $175

Great shape

$225 shipped
Zelle for payment

Login to view embedded media
Supposed to be at 489 Van Zandt road went to 511 Van Zandt and shot homeowner 5 times .

The warrant was for a stolen weed wacker

The stolen weed wacker Belongs to a county official - so the death squad went to the wrong address !
Shot home owner at wrong address at 11:57 pm- did not call in shots fired or for medical assistance for 9 minutes-

When looking for a hard case, I found this online. Had some positive reviews, although I needed to trim up one of the latches with a Dremel. It was difficult to open/close. A rolling hard case with pic and pluck foam for $108 is pretty attactive. I used a couple cans of plasti dip spray to secure the foam once it was "plucked". The rollers make a hard case more appealing. Just Google "Vevor case", and it will come up.

please delete

Like new Pentax PF80-ED with 20-60x (8-24mm) variable eyepiece. $775 shipped. Never seen the field. These are well regarded in the benchrest and birding world. Excellent for spotting trace with the optional wide angle eyepiece.

Also have a new fixed 26x (20mm) wide angle eyepiece thst is excellent for spotting bullet trace. Selling this separately for $215 shipped or combined with the above for $950 shipped.

Will look at trades +- for desert tech srsa2 parts/accessories, handguns, rimfire firearms, turkey gun, etc.
You can also click on my username to see other items i am trying to move. I'll combine shipping as much as possible.

---

I have a Razor Gen 2 4.5x27x56, EBR 7c reticle MOA

Scope is in excellent shape, no nicks or scratches, glass is excellent. Very lightly used.

Comes in original box with a vortex throw lever.

1650 shipped

Been here many times before gather dope to improve my shooting and decided to take the plunge and join the community. I have lived in Austin Texas and Alberta Canada for a couple decades. I now reside full-time in Alberta, close to the mountains, my true passion as a lone wolf. It has been a real shift from the gun freedom of Texas to the Canadian gun environment.

That said I love shooting pretty much anything that fires a projectile. As a lover of long distance shooting I will be focusing on PRS, Rimfire Comps and range shooting. Currently building a MPA Comp rifle with Insite Arms out of Lloydminster. Great guys and they have been very helpful so far. Looking to cross paths with others in the southern Alberta area and will be shooting at the Rocky Rod Range in Rocky Mountain House. Will be shooting in the PRS foothills regionals in Regina and Medicine Hat to start with.

Thanks for allowing me to join the forum. Shoot straight, shoot long, live free.

Gents,

As the title says, I'm looking for this chassis. If you have one you're not using, I'd like to have one.

Thanks

***SOLD***

Bought this for a Flux Raider but didn't like the size of it so went with an RMR setup. Optic is LNIB, only even been mounted.

$120 shipped

***SOLD***

Never got around to using it so it's been sitting on my work bench.

$70 shipped

Removed these from my SBS. Barrel was cut/crowned to 12.5", cerakoted graphite black, had the Vang Comp port system, and gold bead sight installed all done by Vang Comp. Chisel Machining 870 stock still looks new, has RMR mounting plate on top and kick-eez recoil pad, compatible with any Remington 870 as far as I'm aware.

$400 for the barrel
$300 for the stock

***SOLD***

Purchased this for a previous build but ended up using a different chassis. I did cut out a notch in the top of the handguard to make it compatible with the receiver I was using.

$220 shipped

***SOLD***

NIB Scalarworks SYNC mount for Remington 870

$100 shipped.

Sig P320 X5 grip module. Removed the FCU for another purpose and have no need for this module..

$120 shipped