Hello, so I zeroed my rifle in AZ when it was hot (105 degrees) today I went to recheck my zero and it was 65 degrees . My bullet at 100 yards dropped 2 inches. Is this normal ? I’ve always hunting and shot my rifle in California on the coast, the temps were never much different.

I’m shooting a 300 wing mag 185 grn Berger rounds.

SOLD

1st time poster here. Asking $1600 shipped to your FFL for all this. Selling my barely used Tikka T3x CTR 6.5 CM 24” KRG Whiskey 3 setup. Thought I would get into LR more, but moved and have no where to shoot this now. Setup is practically new. Feel free to reach out with any questions. My Reddit GAFS flair is +51 for u/endokfile20 if that helps.

Just got it new Was trying to fix a low telephone line.



Last 1 I lost was 1000x more durable

Chambered in 6mm ARC. Never been in competition. Clean and ready to go.

- Zermatt Origin Action
- Prefered Barrel Blanks 26", 3r 1-7.5, ss
- Area 419 arca mount
- Atlas CAL bipod
- Trigger Tech Diamond 2 stage
- Vortex Viper PST 5-25 x 50
- Area 419 match brake

-MDT - ACC chassis, forend weights, m-lok weights, butt weight, scope mount, vertical grip, dampeners, baker wings, elite cheek pad, bag rider

$5500
Can ship to ffl

Does anyone know if ARCOMP 5.56 loads are more or less prone to create carbon rings in AR rifles than other powders?

sold

Looking to buy an American Rifle Company action wrench for the CDG. Let me know if you’re trying to offload one.

Item sold deleted

I am looking to order a new stock from McMillan and was set on the A5. I'm currently using an A3-5 but I didn't order it with some options I'd like now so I'm going for a new model. I have a bit of a love hate relationship with the butthook but figured it wasn't a huge deal either way so I settled on the A5. I like the wider forend on the A5. Somehow I missed that McMillan now has the A5-7 which is basically just the A5 without the butthook. Does anyone have a good argument for or against the butthook? I do like it sometimes to help pull the stock into my shoulder but it also interferes with certain rear bags. Anyone have pictures of theirs? I'm also looking at the A6/A6-7. Anyone have experience with those?

As titled - Talley makes a set for Winchester 70s generally but it would be great to get a set with a 20moa cant if anyone knows of an alternative!

A pic rail is off the table for aesthetic reasons, but if there's a dovetail that passes the owner's standards for appearance that would be a great rec too.

Thanks for any help in advance!

I have a bunch of brand new cans I’m trying to get rid of. Make offers or if pricing seems wrong send a message.

1. Q Jumbo Shrimp 6.5 $500
2. AAC MK13 SD .300 $700
3. Dead Air Wolverine .30 $600
4. OSS 7.62kt $650
5. Silencer Co Osprey Micro .22 $250
6. Griffin Optimus Micro 5.56 $450
7. OSS 5.56KT $650
8. Gemtech Aurora II 9mm $250
9. CGS MK9 $450
10. Silencer Co Specwar 7.62 $650
11. Sig Sauer SRD 22X $325
12.Ruger Silent-SR .22 $300
13. Tactical Solutions Aeries .22 $220
14. Dead Air Odessa 9 $575
15. Q Erector $325
16. Surfire Socom 762 RC2-BK $1000
17. KGM R30 $525

Selling my 12x50 razor HD’s $750 shipped

I have a lightly used Steiner C35 Night Hunter Thermal clip-on for sale. Excellent condition and low hours. $2300 shipped. Comes with eyepiece for handheld scanning.

Includes charger, battery, all power supply and cables as new in packaging

– ALL SERVICES HAVE BEEN DISCONTINUED INDEFINITELY!
This includes recores, mount conversions, barrel threading, custom parts. We will not respond to inquiries about service work.

Click to expand...

Was just planning to send in a YHM .30 Phantom QD for some "upgrades" and found out ECCO is completely out the Service Work side of the business.
Unfortunate because I was extremely happy with the results of my last re-core I had them do, but I guess, it is what it is.

I just sent off an email to Shaw Armament to see what kind of info I could get since it looks like they still offer it. Just a heads up for folks still considering ECCO, they are done.

Anyone else have solid recommendation of a shop that could be worth calling.

Anyone out there running a B-14R steel barrel in .17 HMR? How is the performance/accuracy? I want something a more lethal and flatter than a .22 LR for close range varmints. I like the R700 compatibility.

Please PM if you have one you're looking to get rid of.

I would like to build a composite metal deck in a new ICF house. The steel deck will be supported by Watkins hangers and steel joists, which are very strong. However I would like to keep the weight of the concrete to a moderate level, so I am investigating admixtures to improve bullet resistance to pistol rounds, .223, and 7.62x39 ammo.

Normally 8" of concrete is needed, I am hoping to have good bullet resistance in 4" or less. Any recommendations? The house is in a very nice neighborhood, I am mostly thinking of a "what if" situation and trying to be prepared.

One of a kind - Custom Staccato XC for sale.

• Custom gunsmithing for that taran tactical pit viper look.
• Custom tuxedo brushed stainless finish.
• Custom machined guiderod bushing
• Custom machined guiderod
• Phoenix trinity - Aluminum grip
• Fusion firearms - Stainless magwell
• Atlas flat trigger
• Trigger job - 2lb pull
• Trijicon SRO 5 moa
• Surefire 300
• Original case
• 2 - 20 rnd magazines (factory)
• 1 - 17 rnd magazine (factory)

$old on another firearm site

I posted this in the RPR thread a while back but haven't got any replies yet. I'm hoping someone can give me an idea to fix my problem. I have a RPR in 308 win. and have recently purchased 500 rounds of plastic training ammo that the german military uses for practice. It's NATO 7.62 x 51, runs a 10 grain plastic projectile at around 4500 fps, and has a plastic case except for the very rear of the cartridge where the rim and primer are which is brass. It's pretty cool stuff with a max effective range of 100-150 yards. I think it's going to work great on rodents. The problem is that the fired casing won't extract, as in the extractor won't grab the rim. The fired casing is loose in the chamber and would probably fall out if the bolt was open and a guy hit the stock with his palm, of course I don't want to do that nor do I want to run a cleaning rod backwards down the barrel after every shot. I measured the rim of the cartridge and it's about 10 thousands smaller than 308 win. Any thoughts ???

Complete AXMC large firing pin magnum bolt (300wm/PRC and the like) 50ish rounds fired, like new. $975 shipped or trade for complete SFP mag bolt.

Brand new unopened iray TL25SE 384 res thermal scope. $1400 shipped insured.

Got a certificate for a free Sig Xten comp. Won’t need it as I just got a custom G40. $800 and I’ll email you the pdf version or add $10 to ship original.

6.5 mm stainless. 5/8 Adapter included.

$110 shipped

I have 3 vortex 30% off certs. All of them have the same 7-25-25 exp date. $100 each. I will send code once payment is received or mail it you if you prefer. Just let me know what you want to do

PayPal F&F.