I have ~425 pieces of 300 Winmag brass, and I cleaned, annealed, and inspected all the brass.

Winchester- 128 pcs
PPU- 49 pcs
Nugent- 52 pcs
FC- 68 pcs
Hornady- 65 pcs
Norma- 11 pcs
Remington- 52 pcs

.60 cents individuals
$30 + shipping for 50pcs
$55 + shipping for 100pcs
$200 + shipping for ALL

I came across some older brass that has never been fired. This is Norma brass head stamped 6mm NORMA BR but it has been necked up to 6.5 BR. It is primed with Remington 7 1/2 primers (SRP). It is quite dirty. I’ll sell it as is for $0.60/round ($60 for 100 rounds) or if you want me to deprime, tumble, anneal, resize to 6BR, and reprime I’ll sell it for $0.85/round ($85 for 100 rounds). Minimum of 100 rounds either way. I have 1000 rounds. PayPal F&F. Let me know if you have questions. In last picture the left one is a piece cleaned and resized to 6BR compared to the original piece on the right.

Up for sale is this Noveske Gen 2 complete factory lower. This lower was built on 12/12 2011 and was part of a complete factory rifle. These Gen 2 lowers were low production and are hard to find, and this one is pretty much pristine. Forged and Flared. Geissele SSA trigger, H-buffer, TangoDown grip, B5 Gen 1 SOPMOD with add-on QD cup. $850 shipped to your FFL. PayPal F&F or Venmo.

Lightly used. $250 Shipped.

No Trade. PayPal F/F, Venmo, or Zelle

New Member referred by a buddy. Hope to pick up some knowledge from this group. I look forward to chatting. Happy New Year

Looking for a little help developing accuracy loads for my JP precision LRP-07 in 6.5 creedmoor. It shoots just about everything well I just haven’t found that magical load yet. Trying to find it without destroying to much brass. If you don’t want to publicly post your load PM me.
Thanks, Nick.

Manners L/A LRH - Black Carbon High Gloss

- 700 L/A foot print
-Mini Chassis
-New
-Sendero barrel channel
-Fits M5 long action bottom metal
-Left side flush cups
-4”pic rail
-High Gloss clear coat

Asking $1095 - No trades

Bought for my wife but she doesn’t use it. Very light use. Color is military green. Asking $40 shipped obo

As title states. 50 pieces. 26 are primed (CCI450s) and 3x fired. 24 are unprimed and 4x fired. Trimmed to 1.550”. Annealed with Burstfire. $35 shipped.

Manners S/A Pro Hunter TUC Forged High Gloss - Reduced

-Rem 700 S/A footprint
-Mini Chassis
-New
-Fits M5 short action Bottom metal
-Left side flush cups
-High Gloss clear coat

Asking sold - No Trades

Looking for a beat up mag, prefer 5rd but anything works magnum magazine going to try a 3.850 magazine first. Looking for a cheaper one as I don't know what this old chassis takes

Hello all, I have a cool billet, PSA Sabre-10A1 in moss green, 14.5" 6.5 CM with a pinned and welded Silencerco ASR mount up for sale. I bought this back in October but never got around to shooting her. Now my wife has caught the precision .22 bug so we are simply rolling funds into a .22 rifle & kit for her. This is a beautiful rifle, fit and fishes appear to be excellent. As mentioned I have not had a chance to shoot it. It has not had an optic mounted to it either. I have 3x extra Lancer mags which will be included at my asking price. Reach out with any questions. No trades at this time.

$1350 delivered, payment via PP F&F or Zelle

Sold

What do you get for the large-headed man in your life? Why this very lightly used XXL black Ops-Core FAST bump helmet with sordin muffs and agilite battery pack! I used this once for varmint hunting and then ended up selling the property. It is great for a varmint hunting setup or if you want to larp a bit I won't judge. (Helmet is not ballistic, just to be clear.)

$700 500 shipped conus. Open to reasonable cash offers but no trades please.

Cross-posted so first I'll take it wins.

I can take paypal f&f, zelle, and check.

Does anyone use the MPA BA scope rings? Not a lot of feedback (especially negative).

Selling my:

Arken Optics SH4 GEN2 4-16X50 VPR-MIL with rings​

Sold the rifle it was on, going to go ahead and sell the scope now with rings

$260 shipped lower 48

For sale only is a used M5s. Has one small scratch that can be seen in the picture. Love these sights but my astigmatism always gives me a fits me with them, so I’m selling. No box or sticker, tool only . One spacer for the extra high and the lower spacer pictured.$600 shipped

Remington 700 308 in XLR folding chassis, 24” barrel, Full Length ARCA rail, Elfman trigger, Omega ASR brake, Caldwell Bipod, Warne scope base, 10 round AICS mag, 200 rounds through it. Meticulously maintained no issues just making room for new projects. $1750 $1650 $1500 Shipped. No Trades.

3-18x44 with H59 reticle and M5B2 elevation turret.

Excellent condition throughout, with light ring marks. Leupold flip caps.

$1500 Shipped insured continental US, Paypal F&F or Venmo. Add 3% for Paypal G&S

MPA BA 30mm Mount
1.060” Height
Good Condition

$SOLD

Very lightly used FoxPro Hammerjack two and carry case.

$200 150 shipped conus. In the interest of economy I may break down the cardboard box for shipment unless seller objects.

I can take zelle, paypal f&f, or check.

Not interested in trades. Cross-posted so first time-stamped "I'll take it" wins.

MPA Matrix competition side rails in black. Includes MPA weights qty 4 and Gray Ops aluminum inserts qty 2. All mounting hardware included. Very good used condition.

$Sold shipped

SOLD two Thunder Beast Arms Corp .338 "BA" Muzzle Brakes for 3/4 x 24 muzzle threads.

MPA BA Comp for 700 SA. Tungsten in color in good used condition.

Update*
Weight Kit, Rails and Rail Weights have been sold. Price updated to reflect remaining components

-MPA Full Weight Kit -Sold
-MPA Competition Side Rails -Sold
-MPA Steel Rail Wights x 4 -Sold
-Gray Ops Aluminum Rail Inserts x 2 -Sold
-Area 419 14” MPA ArcaLock Rail - -Sold

-MPA BA Comp Chassis Only -Sold
-MPA Night Vision Bridge
-MPA 2 Round Holder
-MPA Bag Rider with Flush Cup

AREA 419 .30 cal Sidewinder muzzle brake with adapter for 5/8"-24 muzzle threads.
Was installed on a 6.5CM. Excellent condition.
Have effectively used this same model .30 cal brake on 6.5CM, .300 PRC. & .300NM.
$125.00 shipped to CONTUSA.
Zelle or PP/FF

I was thinking a well tuned AR15 should cycle 100% with the minimum amount of gas needed (from adjustable gas block) right? So shouldn’t you always pick a low weight buffer and then turn down the gas on gas block? How’s that effect the cycling compared to a heavier buffer with more gas? How’s recoil impulse change or does it? The only difference I see is with lighter buffer and less gas it would run cleaner…… are the principles the same when suppressed?

Light buffer + lower gas = ?
Heavier buffer + more gas = ?

Are they equal??