Selling a 25PRC barrel. Cut for a terminus Zeus QC action. Gunsmithing was done by Garrett Preece at Preece Precision. Barrel has about 600 rounds down it. M24 contour. Muzzle threaded 5/8x24. Barrel has been an absolute shooter but I decided to change to a 25 Creedmoor for NRL Hunter comps next season.

24" barrel, 1-7.5 twist. Blank came from Preferred Barrel Blanks

Cerakoted OD Green, does have a few scratches in the cerakote.

Asking 420.00 shipped.

I have a used but great condition Gen 1 ATX chassis.

Only works with the AI short actions like the AT/AX

Black
Gen 1
Folding
Long bridge

SOLD shipped in the lower 48
Discreet PayPal friends and family

Demo Unit
- from first production run
- all original accessories included


Login to view embedded media

Pending Sale

Lenses and exterior are pristine. Clockwise Mil knobs, P4f ret. Includes the Butler creek caps.
$ONE MILLION DOLLARS shipped, No Trades.
PM me if interested.

Ok guys I am a Bolt gun guy. I am looking to buy one or the other seekins SP10 6.5CM or Wilson Combat super sniper. I will be running this primarily for Predator at Night with my Pulsar thermal on top. I have researched high and low and really need honest opinions seeing as I know very little about gas guns. I know I want a quality rifle but tell me why one over the other?

willing to buy and/or trade a Grayboe Phoenix stock.

I understand the party line is that upper to lower fitment on an AR rifle doesn’t effect accuracy.

However, has anyone ever tested this?

I am envisioning someone who isn’t me taking an AR and installing the smallest takedown pins possible, to maximize rattle between the upper and lower, testing the accuracy, then installing the largest pins possible to minimize rattle, and shooting the same course of fire, and noting the results.

Or some other similar experiment etc as everyone is smarter than I am on the subject.

Has anyone done anything like this?

-Stan

I recently picked up at an auction a bolt gun. Literally one photo but decided I’d throw a risk out and put a bid in…I won. So it came and I’m trying to figure out just what the hell I have now. Looks to be a Surgeon action, McMillan stock and carbon wrapped barrel. There are no other markings on the barrel besides 22-250 REM on one side and Valhalla on the other. It has the appearance of a proof barrel and measures 24”. I’m trying to figure out without disassembling the rifle what the barrel manufacturer is. I can’t seem to find a Valhalla barrel anywhere and Proof won’t respond to my questions. Any idea?

Hi, I thought I had these sold to the person who bought my Krebs but they ended up not buying them in the end. In the interim I had packaged everything for shipping and I'll be fucked if I'm going to unbox it all. So, for sale is a great package deal for you AK shooters which consists of 1,220 rounds of ammunition and 12 PMAGS (a $970 value). Get the whole shit and caboodle for $750 $650 $550 shipped/insured to your door.

7.62x39MM Ammo

• 700 Rounds in Sealed Tin w/ can opener
• 180 Rounds Loose
• 340 Rounds wrapped (17 packages x 20 rounds each)

1,220 Rounds Total

Unsealed rounds were opened on April 10, 2024 and have been stored in a temperature and humidity-controlled environment

No Shipments Where Not Legal



MAG® 30 AK/AKM GEN M3®

30-round GEN M3 reliability for your AK

12-30 Round PMAGs for your AK. Only 6 of these were ever loaded with ammunition (I don’t know which 6 now). All are in perfect condition. Bring your range day to another level!

No Sales Where Not Legal!

TECHNICAL SPECIFICATIONS

Got a like new 34mm Area 419 scope mount with pic rail and send it level attachments.
34mm/1.26”/0moa cant
$300 shipped

Manners Long Range Hunter
R700 SA or clone
70/30 Carbon Fiber/OD Green
Elite Hunter Shell
MCS-M5 SA Mini Chassis
Proof Sendero Contour
ARCA Attachment and Atlas B-15 Rail
Purchased brand new from Manners
In amazing shape. No issues or modifications.
DBM not included
Asking $1100 shipped.

Hi all,

It's been a minute since I've been on this site and after years of the tactical game, I've started down the rabbit hole of scout rifles and "general purpose" rifles. My scout game is covered with both a Steyr Scout and a Ruger GSR and I recently purchased a Tikka T3x Arctic which is a lovely beast. However, I found myself with a left over West German Schmidt & Bender fixed 4x scope that is amazingly bright and sharp and thus the hunt began for a host rifle for this scope.

Last week I picked up a .308 Tikka T3x Lite. 22.4" Stainless, 1:11 twist, synthetic stock, etc. My initial thought is to have it cut back to either 18.5" or 20". I envision this rifle to be a handy "ranch" rifle so to speak. I plan to drop it into a used CTR stock I just bought off eBay so that I have 10 rd. mag compatibility with my Arctic. With a fixed 4x I don't imagine shots over 300-400m. I found a reputable gunsmith in the area who will cut my barrel back, thread and even mount his proprietary muzzle brake (Scott @ Live Oak Accuracy outside of Dallas). However, because the barrel diameter being pretty thin to begin with, he'd have to thread to 1/2x28 instead of the more common 5/8x24 for .308.

So now I'm waffling on which direction to go. Should I simply have it cut? If so...to what length? I'm leaning towards 20" to keep it the same as the Arctic, but 18.5" is kind of the old school "carbine" length.

Do I have it threaded...and then have to live with a very specific muzzle brake (albeit a very effective and well made one)? If this option, I'm thinking 18.5" which would put the finished length at 19.75" or thereabouts. Scott did offer to make a thread adaptor which would allow me to use other muzzle devices, but I'm hesitant to use a can with a thread adaptor. But it does provide options for other muzzle devices, flash hiders, etc.

Then there's the piece about gambling with accuracy. The Tikka is guaranteed MOA...do I risk negatively impacting accuracy by cutting? I have faith in Scott's work and reputation but I tend to follow the "if it ain't broke, don't fix it" approach to life.

So, I'm torn...which direction would you go if faced with this dilemma?

I'm planning on putting together a 6mm arc with a barrel between 10 and 12". I've never fired anything with that short of a barrel and don't know what to expect. Would a muzzle brake make it more pleasant or increase concussion? Unfortunately, suppression is not an option, and I may have to pin and weld, so I have to make up my mind before I can try it. This is mainly a "just because" project. Plinking and hunting if velocities will allow. I imagine doing a fair amount of prone shooting with it.

Does anyone have any wisdom to share?

Any of you have experience with these older Sig 556 Swat Patrol rifles? Purchased it new years ago and it's been sitting in the back of my safe. Kicking around the idea of selling it locally to fund something else. I just logged onto GB and searched for completed. Only one popped up and sold for $1650 No Reserve. Ad states that the Swat Patrol is rare. Not sure how true that is. There were 16 bids on it and sold 09/08/2024.

I am trying to step up my game for precision long range. I have had pretty good results from my reloading but want to explore ways to make it even beter. One of my first thoughts was to have a custom sizing die made but not sure how to go about that.

Would i just fire 5-10 rounds using new brass and send them to someone to have a custom sizing die made?

If this is not off base, should i do that with normal loads or hot loads?

Looking for advice and pointers of who can make the custom die.

$150.00 shipped


Excellent condition

$125.00 SPF

Works great

Walther PDP 4” with Walther Dynamic trigger
Trijicon RMR RM06
2 mags
Low round count and great shooter.

Trade for Tikka T1x 22lr, Tikka T1x chassis, PDP Acro version, will consider other trades as well.

$900 shipped

Here is a review of a my B14R I recently had rebarreled by Crossroads Precision Rifles LLC. I went with a mullerworks 1:13 twist in an M24 contour at 25 inches in length, with no muzzle threads. MDT XRS chassis and trigger tech special. Vortex strike eagle on 40 moa mount.

I spent the first few days trying different ammo— SK std+ and SK Rifle match multiple lots that I already had- the best being one of the lots of SK RM, but I wasn’t yet satisfied so I tried ELEY Match (black box) in a couple of different lots and have found what this gun really likes.

I shot 12 — 5 round groups at 50 yds between the 2 best lots.

The best group average 0.244” over 6 groups of 5 shots, second place averaged 0.288” in the same number of groups.

I was surprised at my average velocity in these 2 best groups 1120 and 1117 - on Garmin Xero. SD was 5.5 and 4.2 on those lots.

I then took it out to 100 yds and shot a couple of groups that average 0.632.

I am more than impressed with this rifle.

No cherry picking was done — all of the groups are accounted for — best single 5 shot group was 0.188 and the worst was 0.470 (courtesy of a flier that was 38 fps slower than the average)

Just bought this but it’s not gonna work for my application like I had hoped. Barely used, handful of rounds. Only superficial wear on the finish but otherwise in perfect functioning condition with very light use. Comes with directions and a bunch of screws for adjusting and setting gas flow from factory.

This is their premium adjustable titanium lightweight model yours for $185 shipped. PPFF, Venmo, USPS MO. Cross posted

Trades +/- $ depends on item

Aero M5 308 stripped upper
Aero 12.7” M5 handguard
308 BCG
12” 8.6 BLK OR .375 Raptor AR10 barrel. Faxon, Tromix, ? etc
SA or SLR .750 adjustable GB
Vltor A5H3 buffer
Springco green buffer spring

I am in tears...that pose. "Real Man" LOL

I'm looking for a used RCBS Partner Press. Doesn't have to be pretty just needs to work good. Want to use for a dedicated bullet puller.
Look forward to the replys.

Thanks.

All prices include shipping in the CONUS. Venmo is preferred and all items are crossposted multiple places


KAC mlok barrier stop 60

KAC bipod mount SOLD

Geissele SD-E SOLD

PMM SCAR black rail elimination panels 100

Hodge Slok 11.5 cerakoted a coyote brownish color and a Hodge BCG 285

MDT elite grip black 80

CAG Eotech XPS3-0 with Unity riser SOLD

TBAC CB brake 5/8x24 SOLD