I’m fine with paying for top quality equipment. Right now I’m using the Frankford arsenal trimmer. I’ve been eyeing a gen 3 Henderson. With all the extras it’s around $1100. Ouch. I understand it’ll save a bit of time over the Frankford, is there any noticeable difference as far as es and sd go?
I personally just trim, debur/chamfer one time and then only chamfer/debur if the brass gets dinged up.

Cleaning out a few things and found this.

MBE Evo 2 Bag Rider

$70 shipped

50% off Burris Coupon. Must be redeemed directly with Burris. 50% of MSRP

$300 mailed. PayPal Gift or FF

Decided to go a different route and selling this stock.

$1100 shipped

Brand new
LRH
ELITE HUNTER IMPACT PRECISION SA
MCS-M5 SA MINI CHASSIS
M-24
ADJ BUTT SPACERS 1 INCH
ET GAP MOLDED LRH / PRO HUNTER
3.5" ARCA RAIL

OK, looking into spending some money on a newSafe. Currently have one from tractor supply but with a pending divorce and my wife potentially keeping the house and me moving to a condo. I would just leave the Safe at her house and upgrade to get something better with stronger fireproof. What brands should I be looking at, is liberty as good as it used to be? Here’s what I currently have. I would like one at least this size or larger.
Don’t mind the homemade rosary beads for my grandmother who passed away a few years ago.

Leupold Mark 6, 3-18x44 with TMR reticle.
This has the M5C2 turret with zero stop.
First focal plane.
Pristine, no ring marks.
Mounted once on my .308, sighted in, and then just sat in the safe.
$1,450 shipped.

Wts KAC micro sights rear is NEW
$220
Wts TPS low 34mm rings $55

Selling my Solus Obsidian to consolidate my actions. 180rd through the BA. The bolt lift is nice and light on this one vs the standard Solus. Shooting 0.5” with factory and 0.3” with hand loads. I can provide load devs. Pricing is as follows:

**UPDATE: The everything is sold**

• Obsidian Action, Area419 bolt-knob, 419 bolt-adapter and factory bolt-knob: $690
• Add the Solus 22” 6.5cm Barrel: $200
• Add the TT Single Stage trigger: $100
• Add the Solus Action Wrench: $70
• Add the 17in ODG Competition Chassis, NVG mount, 4x SRS m-lok weight: $670

You know how it is, the action must go first. Shipping and insurance are on me to US50 but your FFL must be able to receive from an individual or add $40 to ship the action. The only trades that I'm looking for are barrels for CDG/Maus/Arch, American Rifle Co actions and a XLR C6 buttstock.

Honestly forget where I got this, but I'm downsizing. Brand new in box, 35mm, 20 MOA.

Looking to get $175 shipped or make an offer, payment via Zelle or USPS MO

Limited Quantity of SwissP 223 Rem 69gr Styx Action Available - As low as a dollar per round

Norma 300 SAUM Brass - Ships starting Friday

First is a brand new/handled Mausingfield M7 SA. 308 BF. 20 MOA rail. One of the last few purchased from ARC before they went out of stock for good. Has been handled but never fired. $1200 OBO shipped to your FFL

Next is 500ct Berger 105gr Hybrids. Lot #3168. $225 shipped.

Anyone else watching this? this is by far the worst presidential interview I've ever seen. she's unbearably whiney. Bret is ripping her a new asshole in the first 10 mins
anyone wanna bet the poly markets tomorrow morning are 70/30?

Bought this for a project and decided to do something different.

This is brand new never had a barrel installed.

Short action standard bolt face

$875 shipped

Been sitting in the back of my closet for a good while so I could use the money elsewhere.
$450 (400 rounds of the 500 left)

Have two 100ct boxes of Berger 105gr hybrid bullets, same lot

$85 shipped
PayPal ff only

This came on a B&T can that I have, I don't run a lot of surefire muzzle brakes so I swapped it out for what I do use.

Description
5.56 SF Titanium HUB Adapter

(SD-ADPSFTI-556)

The Rotex-SF HUB is fully compatible with all 1.375x24TPI “HUB” compatible suppressors on the market today and is constructed of Titanium and stainless steel components. This HUB is compatible with all B&T Rotex flash hiders, as well as all SureFire SOCOM flash hiders, muzzle brakes and WarComp hybrid muzzle devices. The HUB is simply threaded into compatible suppressors and snugged up with a spanner wrench. HUB assemblies can be semi-permanently attached using Rocksett or other thread locking compounds should the end user desire. The Rotex-SF HUB ships standard with all Rotex and SRBS rifle suppressors.

Fully HUB Compatible (1.375x24TPI)
Constructed of Titanium and Stainless Steel
B&T Rotex Flash Hider and SureFire SOCOM Muzzle Device compatible
One-Hand Mounting System
5.56x45mm Compatible
Not Compatible with the SFA2-556 SF Muzzle Device

$225 shipped

Been debating selling the beast. Premier Heritage Tactical 5-25x56, MOA with MOA-ER illuminated reticle.

Standard turret wear. Functions perfectly and glass is clean. Comes with PR caps but no box.

$1750 shipped.
$2000 with NEAR mount.

Trade of interest: ATACR 7-35, Mil-C. TT315M or P, gen3xr. ATACR 4-20, Mil-XT. SB 6-36 RAL7005, MSR2.

Look for a Foundation Centurion for an Impact 737R

Preferably with Arca / DBM and weight

PP F&F payment

MP your offers

Looking to sell my TL3 SA AI cut action I have 308,223, and 224v bolt heads for it. Brand new bolt in the action 20MOA rail $1250 shipped with all three bolt heads.

Looking to sell my LNIB Altas PRS bipod in FDE. You can see the condition in the photos.

Looking to get $300 shipped to your door.

Immaculate condition price is 90 shipped, buyer covers PayPal fees

Up for sale is a small piece of history, In the early 2010's, CAG wanted .260 rifles to match their surgeon CSR's, SAC & Armalite came up with this rifle. This is a truly hand built, custom, semi-automatic rifle. For the ultimate in precision, performance, and exclusivity, the Armalite CAG Trials Rifle, a rare collaboration between SAC (Specialized Armaments Corporation) and Armalite, chambered in .260 Remington. This rifle was meticulously crafted for the demanding selection process of CAG, and to my knowledge, only four rifles were ever produced. If you're a serious collector, operator, or enthusiast, this is an opportunity to own a piece of military history. The rifle looks to be only test fired, there are a few small knicks and marks from being stored in a safe. The only other one on the market that I have seen, is currently for sale for $25k.

SOLD Shipped. Comes as pictured with a KAC 10rd mag.
Venmo F&F or bank wire only.

Please inquire for more information and pictures.

I have a MDT 34mm One Piece Mount up for sale. This is the High version that is 1.54" in Height and it has 0 MOA Cant. (Brand New in Box.)

These Mounts are built like a Tank and are more reliable than the Spuhr Mounts.

Only $old Shipped.

Lightly used, comes with 2 torches. Works great, have had for a year just went a different route.

Asking $400 shipped.

Selling a Manners EH1A RH Rem 700 SA with Gen 2 Mini Chassis. Elite fill, Molded in Moss color, Sendero barrel channel. Star nuts installed in stock for Area 419 14" Arca rail or Area 419 pic rail. Area 419 Pic rail will be included with stock along with SAP 2 rd holder. 875 tyd. Pm if interested.