SPUHR WITH RMR sold




All shipped to Conus

Only trades would be for 35mm match rings or mount.

Selling my Seekins precision HAVAK HIT rifle in 6.5 Creedmoor with a custom carbon6 carbon fiber barrel. The barrel is chambered in 6.5 creedmoor and is a 1.2 strait taper bull profile, 1-8 twist, 24 inches, quick change, and threaded 5/8x24. The rifle has the FDE colored chassis, full length arca rail, and TriggerTech diamond trigger. Rifle is in like new condition, has 110rds down the barrel, and loves 140gr Sierra match kings & Hornady 95gr vmax ammo. I regularly shoot 1/2 moa with either factory round. Located in Houston if local, looking for $2150 shipped for the rifle. Also interested in trading for so nice glass Nightforce, Schmidt, Leupold mk5hd, etc...
I’ve gotten the same questions multiple times now, so just to clarify: This sale is for a seekins hit rifle with 1 barrel, the barrel is chambered in 6.5 creedmoor, it is a custom barrel made by a company called carbon six. Carbon six makes custom carbon fiber barrels.

I have the original barrel from my Gen 1 Vudoo V22 which was pulled with less than 1K rounds down the barrel. It is an Ace 1:16 twist Kukri contour finished at 16.5" long with thread protector and barrel on bore guide included, asking $125.00 shipped.

I have a used Bartlein barrel 22" long, heavy Palma contour, 1:8 twist, spun up by Preece Precision using the Saw2 reamer for an Impact 737 action with less than 300 rounds. Been beat up a little bit but plenty of life left in this pipe, asking $250.00 shipped.

Nib Geissele 15” SMR MK15 DDC MLOCK FDE
$250
Will trade for impact or origin barrels

If you have one you would sell let me know.

Thanks

Excellent condition (Looks like new) Scar 20s FDE 6.5 creedmoor (reciprocating charging handle) also included as pictured is a brand new atlas monopod. I bought used and haven't shot it but looks to have an extremely low round count. $2900 shipped to your ffl.

**PRICE IS FIRM**

will consider trades on semi auto rifles and pistol caliber carbines. Only bolt rifle I’d consider is a 300 prc.

I just pulled the trigger on a Hellcat Pro, should be here in a few days.

Curious to know if there are any resources to find MP3 files for additional calls - apparently it comes with 200, but can hold 1000 so can't hurt to add a few specifics.

Thanks!

Swaro/Kahles 55% off cert.
$1100 shipped to you.
Price is firm.
Paypal f&f or add 3%

Looking for a 308 bolt only for a Terminus Zues action.

Selling this barreled action.. had it setup to be a dedicated night gun but maybe trying a different plan. Specs below!

Action: Impact Precision 737 SA right hand- roughly 800 rounds through it $1250 by itself

Barrel: 18" Proof Research Sendero Carbon Fiber 7.5 Twist chambered by Radix Precision - roughly 800 rounds on it $500 by itself

Trigger: Bix n Andy Dakota $150 by itself

Muzzle Device: Rearden SPB 5/8x28 (fits plan b, Rearden Atlas, etc.) (included with barrel)

or $1800 for the whole setup shipped to your FFL

Debating on just shooting 6mm from now on. Seeing if there is any interest in a barrel.


2. TS Customs 28" m24 profile
5/8 threads
1-7.5 twist
400 rounds
Asking $400 shipped

Great condition Zeiss Victory RF 10x42 binos with box and everything. Used them a couple NRL Hunter style matches and loved them- in my opinion the best RF ballistics binos out there when you consider how good the glass is. Only reason for selling is I've got the 10x54s already and feel like these would sell easier. DM for more information.

$2700 ($3999 new)

Not sure if this is just me and my guns but here is what I see after firing and resizing with a Redding Elite type S bushing die set.

I have 300 WM, .308win, 6.5cm and they all seem to fire a few times with neck sizing only then after the first 2 or 3 firings I would assume they would be my chamber size. So my 300 WM like 2.010 on my SAC comparator with a Mitutoyo caliper. I spray lube and I set my sizing die(on a Forrester CO-AX) until I get a 2.010 measurement(They are 2.014ish) when I start. I run 10 cases and I get 2.009, 2.006, 2.011, 2.012...

I cant for the life of me figure out why I get such a weird range of sizes with a fixed die in a decent press. I assume the cases arent all the same size when I start.

Below is my numbers from 50 rounds of PPU brass(I know its crap, It was factory ammo I bought for the brass when 300wm was hard to find). Its weird that the numbers get worse from min to max after sizing I would expect .0005 to .001 range after my process.

Any constructive thoughts would be appriciated. I know I need to invest in Lapua brass, I can't find any when I look locally.

Seriously looking at the Seekins Havak PH2 ,it will be a bench gun 6.5 CM or 308.
Seen a lot of good reviews but I also see a lot for sale in the used rifle market.That always gets me wondering why so many used ones for sale.dont want to drop $1800 + and regret it because I didn’t do my homework.Would appreciate any input.
Thanks

I have 2 XLR Envy Pro Chassis for REM 700 SA with complete weight kits. I am pricing these for a quick sale. Both are the newest version with adjustable magazine height. Nothing at all wrong with these I am just switching brands and I will have 3 more available when the new chassis start showing up. I also have several grips you can choose from. What you see is what you get. Thumb rest, bad riders and complete set of weights will be included for each.
Best price on SH

$850 each shipped to lower 48

$450 shipped

New never used
black multicam
Shipped

Selling Triggertech out of my Weatherby MarkV Backcountry. It’s adjustable 2.5-5lbs
$130

I noticed both Defiance and Impact have new bolts, maybe they didn't like when I said nobody needs a 2 lug 90 degree action for more than $1500 in 2024 moving forwared

I like you can get a bolt vs a new action though, smart.


It's crazy that it took these guys this long to go better than 90...

$210 shipped each with level (one sold)
$85 lrf bridge (with a mount) (sold)
I have 2 1.5” 35mm 0 Moa ARC Mbrace mounts with 2 levels and 1 lrf shroud. The shroud has been kryloned

Looking to sell or trade.

Mainly looking for a 34mm mount with lrf bridge, 0moa

A couple other things I need
34mm mount 1.3” ish with lrf bridge
Badger arc 35mm c1 max
Badger arc 35mm c1
2x badger impact bridge
Rearden md’s
Ir lasers
Bump helmet
Ir lights
Safariland g17/x300/Sro

Will consider others

Let me know what you have.

Plus or minus cash depending

Thanks

Selling a new Manners flat top stock in T2A-GAP (the old style) ELITE fill

NOTE: No inlet no hardware, 100% flat top stock

$725 Shipped CONUS

Looking for a 58” Armageddon gear rifle case. Don’t care on color. Just looking for in good shape. Tired of lugging around my hard case.

Looking for a light short can for a 16” 6.8spc bolt gun and 16” 22br bolt gun. I wear ear pro even suppressed except for 1-2 shots while hunting.

I’m currently running a tbac 30BA 9” and a KGM R30K. Like both but would like another shorter can similar to the R30K to replace the TBAC.

Interested in the Abel theorem S, tbac dominus, and diligent defense enticer S ti.

I would probably pick the dominus other than I haven’t seen them in stock. Any suggestions between these or other suggestions?

I have a new barrel machined for my Defiance Ruckus Action. Now i am mounting it. The process is simple. I have the barrel vise, action wrench and go no/go gauges.

My question is whether or not I need to remove the firing pin and or extractor from the bolt first before checking the go no/go gauges

On my Zermat Arms Origion Action, i had to remove my extractor before checking the go no-go gauges and wasnt sure if that was consistent for all actions.