Login to view embedded media
Maven has some of the sexiest looking scopes on the market in terms of build quality, materials, and styling. But don't let a hot body fool you. Like an exotic sports car the Maven RS.4 has serious engineering under the hood.

The RS.4 is Maven's scope for PRS competition or long range Western hunting. It offers many features optimized for long range enthusiasts. Maven offers it in MIL or MOA with a variety of Christmas tree and specialty reticles. I got the CFR-MIL reticle which is similar to the PR2 reticle on the Leupold Mk5.


The turrets are oversized and large diameter to provide quick turns to adjust dope and fine adjustments. The turret have a hidden tool-less locking top to allow the user to reset them. Under the elevation turret you'll find a black metal ring that can be dropped to engage a pin on the turret base to engage a precise zero-stop.


All the nobs and rings turn smoothly. The turrets offer precise tactile clicks that audible. The reticle illumination is powered by a CR2032 coin battery and is split between red and green settings with an off in-between brightness settings. The illumination dial layout is a little unusual with the highest settings in both red and green are on the same side of the dial. Unfortunately it's illumination is only so-so. Only the very central cruciform of the reticle is illuminated with a faint glow on the Christmas tree. The RS.4's brightest isn't noon-day daylight which a liability for certain lighting conditions.


The RS.4 has ED glass which gives it excellent sharpness, clarity, and color balance. Chromatic aberration was greatly minimized in all but the highest contrast conditions. Even in those extreme cases, I noted an orange fringe rather than a purple or green one. The eyebox was a bit unforgiving, even with the magnification dialed down to 10x. At 30x it's very tight, so it's imperative the shooter have a firm and comfortable cheek weld on their rifle.


The RS.4 is a beautifully designed scope with long range shooters in mind. Especially the kind of shooter who step out of their custom Cybertruck wearing their ironed T.A.D. outfits and matching Canadian Goose parka.

ONLINE RETAILERS​

Maven affiliate: https://alnk.to/7X4TGjC
Maven Custom builder (use code: moondog): https://alnk.to/3J6z2Dh
Amazon affiliate: https://amzn.to/3MByMgU

SPECS​

:: Originally posted on my blog https://moondogindustries.com ::

Posting for a friend of mine.
6k for entire package

ATX configured with AXSR stock and bedded

(2) 24” Bartlein 6.5 CM barrels

The one on the rifle has 930 rounds on it. The other one has roughly 400.

(1) 24” Bartlein 6 CM barrel. Roughly 1400 rounds on it so almost burnt out but still performing well.

(1) 20” Proof 308 barrel. 1350 rounds on it.

(4) AI weights

Hoptic 2 round holder

3 magazines FDE and Black

Top forend cover full length

Pic attachment and a 20 moa full length rail

Like new Burris XTR III 5.5-30 in a Spuhr SP-4901 mount. Extras include diving board, race turret, throw lever and DFAT to 55mm ring. Original box and all accessories for both the scope and the Spuhr. SCR-MOA reticle. $1000 shipped and insured. Can accept paypal FF, Venmo, or Zelle. Price reduced for quick sale.

This Winchester model 70 was custom built by American Precision Arms ( APA ) who no longer offers complete rifle builds. All of the custom built rifles from APA started around 5K back when they were offered! This model 70 long action is chambered in .300 Win Mag and the action was trued up and blue printed. It was matched with a 22" Schneider A3 heavy barrel that is threaded 5/8-24 tpi so your favorite suppressor will thread on perfectly. The bottom metal is a CDI detachable box magazine style that takes AI magazines for reliable feeding. The rifle comes with one 5 round AI magazine. The stock is a McMillan A5 and the rifle and stock have a custom camo paint job, the Harris bipod is included. Don't let this custom APA Model 70 get away from you.

To purchase this gun, you must message me though the board here or contact me through my web site email:


[email protected]


We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, we are in Tulsa Oklahoma, and Our bank is a locally owned bank in Tulsa Oklahoma.


Price:$2750.00

WTS: Mcmillian M40A3 smear stock (A4). New release smear. Two screw cheek riser. Sniper fill. Precision pillars. Inlet for right hand r700 or clones with M40 barrel and M5 bottom metal. 2 inch pictanny rail added to the fore end. Will Include sling stud.

$950 shipped conus

PayPal f&f

Driving a 21 taco with 90k miles on it. Currently commute about 45 each way to work. Need something with better gas mileage. Drive to and from a national forest for work, needs to be able to go in snow. Looking at a new forester. Retarded idea or not completely retarded?

I have a nearly new Gen 3 HD 6-36 Razor HD in EBR7D reticle. Purchased new from CS tactical. All is included, manual, tools, throw lever -batteries not installed. Mounted and shot and taken to range total of three times. Glass is perfect, body has to be 99.999% No scratches. if you can see ring marks your eyes are better than mine. Throwing in some excellent MKM scope caps.

Asking $2300 shipped

Low ballers and Nigerain princes will be ignored. I only sell premium gear that is 100% functional and in excellent condition.


Thanks for looking.

I'm really wanting to run this rail for my AR308 but for the life of me I can't find this rail anywhere and CMT won't respond to emails.

Help a guy out if you can

https://www.cmttac.com/index.php?route=product/product&path=95_98&product_id=183

UHPR 13.7 MOD 2-HP 308 RAILS​

or

https://www.cmttac.com/AR10-RAIL

UHPR 15.0 MOD 2-HP 308 RAILS​

Sako TRG 22 chambered in 6.5 Creedmoor like new in its factory box. The TRG 22 in 6.5 Creedmoor is no longer in production, making these rifles extremely hard to find. This TRG 22 is the all-black stealth configuration featuring a black stock and bolt with blackened barrel and action. The solid vault-like action is machined from special steel alloy. It has a TRG42.COM 1913 rail on the top of the receiver just waiting for your favorite scope. The sturdy bolt with three locking lugs feeds rounds flawlessly from the centerline of a detachable staggered 2-row magazine. The bolt lift is at a 60° angle for fast bolt throw on secondary shots. Don't let this SAKO TRG 22 get away from you. The rifle has been fired but as you can see in the photos it is great shape and is ready it's next owner and next trip to the range or hunting!


To purchase this gun, you must message me though the board here or contact me through my web site email:


[email protected]


We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, I am in Tulsa Oklahoma, and our bank is a locally owned bank in Tulsa Oklahoma.


Price: $2750.00+ shipping

Relocating to Anderson/Greenville area of SC. My current gun club has decent 100/200/300 yard rifle ranges (as well as shotgun/pistol ranges and IDPA style matches). Know of any full featured gun clubs in the Anderson/Greenville area?

Thanks!

HS precision made M24 stock. This is an actual unissued M24 stock with the smooth coating. Buttpad has been swapped out to an HS precision marked one. Inlet for sunnyhill bottom metal.

Includes sunnyhill bottom metal. The bottom metal is the same as the M24 BM with the exception that it’s the civilian version with slightly thinner trigger guard. Fits into the stock perfectly.

$800 shipped for the stock and BM. Payment via PayPal, Zelle, Venmo, USPS MO. SOLD

13" Expo Wedgelock rail, no visible wear, lightly rattle canned. Comes with barrel nut, all hardware, and wrench $150

11.7" SLR ION HDX MLOK - F rail. Well used showing some knicks and scratches here and there, still perfectly functional, comes with all hardware, barrel nut, and gas tube alignment piece, $150

Burris Signature Rings, 30mm, 1.0", $40 shipped

I have lots of 250 pieces Hornady once fired LRP brass. I have 1500 pieces of 6.5 CM and 1000 pieces 6mm CM. $100 shipped per 250.

Im not sure if this is the right place. I didn’t see a gear type subsection. I’m looking for another pack to take on my day long LARPing trips. My hunting pack is too big and my hiking pack is too small to carry spotting scope, warming layers, kestrel, etc. I’m looking at the attakpak website as I really like the fact that the belt is detachable from the pack as a stand alone unit. I generally carry my bono harness, smaller pack, and battle belt.

I generally play at around 9-12k feet and finding a good pack has cost me a lot of money over the years. Any recommendations in mind?

Want to buy

HK usp compact mags 8 or 10 rounders

Let me know

Thanks

I have a Like New in box Schmidt & Bender PM-II 5-25x56mm Illuminated P4LF-MOA Reticle in the FFP.

Item Number # 677-911-982-A8-A2

Comes with Factory Box and Flip Up Caps. Glass is Flawless and it Tracks Perfectly.

$OLD Shipped.

SOLD to VSP968

For Sale- Nightforce ATACR 7-35x56 F1 Mil C with Sunshade. $2200 shipped in lower 48.

How close to the scope body is the field of light coming through the objective lens?

I’m wondering how long a sunshade would have to be to reduce FOV.

Does any scope manufacture make a white reticle? If not, why not? I get that many scopes have the ability to turn the reticle to green or red, but why not just a plain white crosshair reticle. Educate me. I shoot BPCR silhouette and my reticle blends into the silhouette and leaves me with no point of hold. I need a white reticle for ref on the black silhouettes.

Lothar Walther .30 cal, 10 twist for 26" length (can go shorter). Medium palma contour

Bought it a year ago and never got around to the project.

$360 shipped.

Cz 455/457 bore tech bore guide. 27 dollars shipped. Pay pal ff

Car gets stuck full throttle and goes several miles through some small towns. The driver is a young guy that stays calm and works with police to get it stopped, nice work!


Login to view embedded media

Bushnell forge 15×56 bino with box and all accessories except missing bottom eye caps. 350 pay pal ff shipped

This is a 1st-year Savage Model 10 .308 AccuTrigger, purchased new in Austin in 2003, cut to 18.5" and threaded for an old-school AWC ThunderTrap. It's what I cut my teeth on 20 years ago, back when we didn’t have good stock options or affordable glass for a young engineer starting a family with a wife at home cranking out great-looking boys (and a girl) who clearly benefit from her staggering good looks.

Speaking of good looks, what a way to bring this rifle back to life: an MDT XRS chassis and Arken SH4 4-16X50 GEN2.

It's honestly remarkable how good this rifle is for the money.

I had almost forgotten about this rifle (if you can believe it) because I threw the can on my .300WM for a while and sold the glass off the Savage. The barreled action laid around in the workshop for about 14 years.

Now, I’m excited all over again.

Range results will be shared later this week after the F1 madness in Austin dies down.

Stay frosty.

MDT Carbon Fiber Grip w/ hardware-Crazy Light: $WITHDRAWN
Mean Carbon+Magpul K Grips, w/ hardware: $30 for both
Fab Defense GL Core S Stock: SOLD