Looking for a little load data.

I have a 6.5 creedmoor with 24inch barrel.

Staball 6.5 powder

I have 123gr and 130gr bullets.

The 3 in bags are take-off from rifles, the Competition is new in box.
I'm not sure exactly what model the ones in the bags are, they're from 2015-16 and the names have changed. They're single stage with a more rolling break, not a sharp break, and a black shoe.

Ones in bags: $125/ea
Hipertouch Competition: -$200- SOLD

Prices are OBO, shipped
Payment via Zelle, Cashapp, or USPS MO.
PM me any questions!

Greyboe Phoenix, Remington 700 long action, m40 barrel contour, greyboe bottom metal. Has not been bedded. Action screws included. 400 shipped.

I own a IHC M1 that I purchased from CMP in 2005 that I believe is a LEAD rebuild. The serial number is 4,550,6XX. It has an LMR barrel dated 4-53, and all the major components (Bolt, trigger housing, op rod, hammer, gas plug, etc.) are IHC marked. The stock has a circle "P" in front of the pistol grip and the number "3162" in the barrel channel. While this rifle has a postage stamp style receiver marking that reads "U.S. RIFLE / CAL. 30M1 / INTERNATIONAL / HARVESTER/ 45506XX", the side of the receiver is marked "D6528291-E" and "LEAD 10-64".

From what I can find, receiver drawing number D6528291-“E” was assigned to HRA rifles.

Has anyone ever come across a IHC receiver marked like mine?

Beretta 12ga a400 xcel sporting black edition with kick off. 30” barrel. IM, IC, C chokes. Excellent condition. 500 or so rounds through it, very smooth.
Pro lifter available for $50
$1450 obo shipped ffl>ffl

PayPal ff or add fee.

Great condition no box

Has some ring marks nothing crazy

34mm illuminated not daylight bright

1750 shipped

New in box Bat XL action. Cheytac bolt face. 2100 plus shipping. No wait time!

SOLD

I have a Team Warne 30mm RAMP mount for sale. Mount is in great shape as you can see and it almost like new. Asking $95obo shipped to lower 48. PayPal F&F, check or money order for payment. MM any questions.

I’m looking for a new Noveske chainsaw or gen4 stripped upper. If anyone has one or any leads on one let me know . Thanks

I like it, especially setting up outside of DC.

For election 2024, President Trump’s transition team is now saying they are likely to go it alone and skip any federal transition assistance in advance of inauguration day. That decision is making the deepest parts of the Deep State apparatus very nervous. That decision has major ramifications and could, likely would, include the incoming Trump administration setting up offices outside Washington DC.

Click to expand...

https://theconservativetreehouse.co...ion-funding-if-president-trump-wins-election/

Defiance Deviant Tactical (Short Action)
Jewell trigger
Brux 6.5 Creedmoor Barrel w/ defensive edge 4-port brake (est. 500 rounds fired)
Brux .308 Win Barrel w/ defensive edge 4-port brake (547 rounds fired)

Selling my defiance deviant barreled action. It’s currently wearing the 6.5 barrel. Barrels were spun up by Defensive Edge. Also comes with a Jewell trigger. $2000 to your ffl.

Group was shot at 100 yards with factory 140gr ELDMs.

Was posted on Long Range Hunting forum, but it turns out heavy barrels aren’t their thing…

More pictures upon request.

Looking for a 20" 308 Proof Carbon Fiber barrel for an AI/M27, new or lightly used only. Also looking for an AI/M27 6GT barrel.

For sale:

Manners TCS Stock - Rem 700 Mini Chassis - in High Gloss Elite Tactical Moola.

Comes with the newer aluminum rail, a complete weight set, 4 stock spacers, the new $150 front end rail weight, action screws and manual.

Price: $old shipped

I accept PayPal Friends and Family, USPS Postal Money Orders and checks. Please see my feedback many happy customers.

Impact action
.308 bolt face .473
Less than 50 rounds
Like new condition
.068 firing pin
Comes with trigger hanger
$1250 shipped

Today i was loading up rounds for load development for mr AR. I was getting a wide range of OAL from 2.239 to 2.257 loading 77gr otm. I was aming for 2.25. My equipment is a lyman turret press and using a hornady micro adj setting die. The turret is on tight as it can get. Is the difference from the bullets not being all uniform or is it tension when seating. I do anneal my brass as well. Even though its just AR loads I wanna learn as much as i can before i step into the bolt action world and waste potential money. Thanks again for any info.

Hi all,

Up for sale is an unused pair of AOR1 contract made Goretex pants in XL.

As a dude that wears a 34 typically, these fit me fine with room to fill when worn under over pants.

Killer piece, camo and price!

Asking $100 shipped

Arken EP-5 GenII 7-35X56 VPR FFP MIL
Comes with original box, front and rear lens caps, throw lever, and bubble level. All in excellent like-new condition.

$575 Shipped PP G&S or Venmo

As new…mounted on a custom 300wm- went a different direction and this has been in the safe since 2006? This scope has never been fielded, it was on the gun for a few days, removed and placed back in the box. No marks, excellent condition with all paperwork.

$2700.00.

Thanks,

CLW

Iran targeting Bibi’s house was grave mistake!

Watch for mullahs to be turned into Doner Kebab next.

More likely stir fry. Very small parts!

No pissant little pager RDX charges this time…

Mullah butter on the menu!!

Just ‘sayin!!!

Letting go a zeiss S3 LRP 4-25x50. Mil/mil, ZF-MRI glass is clean and has only been to the range a few times. Really like the optic but going lighter. Has the sunshade and MKM lens covers. Comes with Nightforce 6 screw rings as well. $1600 + shipping

Would entertain and LRHS2 or LRHSi/LRTSi in trade

Here’s a message I just received from someone when I replied to a thread for an item for sale that I had previous communication with and this is not the person who made the thread. I have already reported the person. And sent an email, just wanted to keep everyone informed…. It’s almost like they didn’t even try, username is no where near similar.

Here is the link to where I posted and
https://www.snipershide.com/shootin...-apa-gen-3-fat-bastard.7226287/#post-11801496


Here is the post and link to the person who messaged with me and a screenshot.

https://www.snipershide.com/shootin...n-3-fat-bastard.7790706/#convMessage-11154050

Up for grabs is a new Bergara B14r, .22LR. I picked this up to carve a stock for, but ended up with a 16" 308Win.

$800 - Barreled Action w/Triggertech Special
$650 - w/Factory trigger

Original box, papers and one magazine.

I swear I had a graphic stored on my phone that listed the LOP for these stocks. Alas.

And today my google-gu is weak. Few forum posts across the internets just fucking list the LOP. Wtf.

Here’s one (not even sure if there’s an A1 stock in this pic):


It appears the A1 is 12.875” and A2 is 13.5” (I did find a number of posts about the A2). But some say the A2 has a 13 5/8” lop.

I’m not sure why there’s a discrepancy other than maybe people have triggers that have a slightly different resting position? Not that 1/8” matters that much, but it’s nice to know.

Can someone verify these numbers and add the LOP for the entry stock?

Visually, for those noobs who are learning snd don’t know what I’m talking about, here they are below.

I have a like new, needs a battery MDT Crush It Timer. $230 shipped and also will throw a pressure switch in.

Leupold Ultra 16x-M1a target dot scope with Butler Creek lens covers $1200 shipped postal money order for payment thanks for looking geoff3.