WTS KAC SR-25 Assembly Kit Lower - New in Box - Ended up with several, so this one needs to go. Will not shipped to any banned states. SOLD shipped to your FFL

300 Norma - Defiant Action with 120 rounds in an MPA Chassis, Bix and Andy Trigger, and LaRue Tactical Harris Bipod. The work was done by Joe Walls. I'll also include 200 pieces of new brass for it.

$1700 OBO Shipped to your FFL for $50 insured. I can do face-to-face for GA residents near Ft Benning. Priced to move.

WTS a New in Wrapper LMT SpecWar upper. I bought two and decided to only build-out one. MSRP $1014 - SOLD

Built with operational performance in mind, the new LMT Spec War upper was designed in partnership with some of Americas most specialized warfighters. This upper was built to utilize the new 12.5″ MRP barrel as well as other 12″ or greater barrels. We removed the built in forward QD swivels and extended the length over the traditional CQB length to improve ergonomics and accessory real estate. What this does is give the user a better fighting edge and increased lethality.

Among keeping the classic barrel swap capability, the Spec War focuses on the need to maintain a rigid platform for mounted laser aiming and illumination devices, crucial for night operations. Additionally, this upper receiver features MLOK pattern rail mounting platform and a continuous picatinny top rail. For those who require use of a QD sling, a single point is available in the aft portion of the receiver.

The patented LMT monolithic rail platform (MRP) upper receiver, has a receiver and handguard that are made from a single piece of aerospace grade aluminum. The barrel is held in place with a proprietary locking system that utilizes two locking bolts accessible from the right side of the receiver. The only tool needed is a standard T-30 Torx bit to tighten the bolts. This receiver requires the patented LMT monolithic barrel assembly which has a low profile gas block with straight gas tube.



Stock Photo

6 Dasher with a little under 450 rounds, MPA Chassis, Bix and Andy Trigger, and Atlas Bipod. A new prefit barrel is included. The work was done by Joe Walls. I have a twin of this one that I'll also be listing along with a 300 Normal also from Joe Walls. I can swap the bipod for a new LaRue Tactical Harris bipod at no charge.

$1700 OBO Shipped to your FFL for $50 insured. I can do face-to-face for GA residents near Ft Benning. Priced to move.

Up for sale is a like new Geissele URG-I near clone. It has less than 100 rounds on it. Geissele barrel. Comes with the Super 42 braided wire and H3 buffer.
URG-I MSRP $1,450

SOLD Shipped

New in Box, KAC SR-15 16' upper. It's been sitting collecting dust. Comes with BUIS and MauPul rail covers. SOLD shipped in CONUS.

PN:31962

The SR-15 E3 Mod 2 series’ 5.56mm NATO barrel is manufactured for military grade durability, and is free-floated inside a URX4 M-LOK handguard. An improved E3.2 round-lug bolt design both enhances function and increases bolt life far beyond the industry standard. The 5.56mm 3-Prong Flash Eliminator interferes with propellant gas combustion forward of the muzzle to significantly reduce flash signature, will not ring upon firing or when struck, and is compatible with the Knight’s line of 5.56mm QDC Signature Reduction Devices.

Specifications:
Barrel: 16.1” (40cm) 1:7 Twist, Hammer Forged, Chrome Lined
Caliber: 5.56mm NATO
Weight: 4.3lbs (1.95kg)
Length: 25.1” (63cm) OAL

I’m really tired of picking up my StingIR and either:
-Finding out the batteries had parasitic drain since the last time I used the thermal and they’re dead

Or

-having to take out the battery after every use and put it back in every time I want to use my thermal.

This seems like the dumbest thing. I fully realize that leaving batteries in my thermal will result in parasitic drain or possible corrosion, which is bad, but I just feel like this isn’t serious equipment if it can’t just be picked up and turned on when I need it.

So…I want to run my StingIR from an external battery/battery bank. The catch is that I want it to be something that attaches to the StingIR itself and not the rifle or a helmet. This is because I use my StingIR as a clip on and as a handheld. So the battery has to be capable and of easily moving from one to the other.

My initial searches brought up the Anker Nano, which plugs directly into the StingIR’s USB-C port and is about the width of an IPhone screen. This seems like it could work, but is definitely on the bulky side compared to the size of the StingIR. Plus I have worries about its durability and ability to withstand recoil without damaging the StingIR or the battery bank.

Are there other options? I’m not against attaching a battery bank to the side of the StingIR in some way if that’s the way to go.

• THIS SCOPE IS SOLD
• Burris XTR Pro 5.5-30x56 SCR 2 Reticle in mils
• EXCELLENT condition, used only for practice, never in a match
• Getting out of 22LR so don't need it any longer
• Added exposed windage turret
• 34mm rings included
• Sunshade included
• Caps, throw lever, battery, tool

$1,375 shipped CONUS, PayPal FF please. Happy to send verification when we connect.

I'm interested in building a 7mm SS. I already have a great stock for the build but would like some feedback. I'm disappointed ARC discontinued the Mausingfield and am not interested in having to modify either the stock or the action for their CDP action. I've already talked with ARC about it.

Here's the specs I'm looking for:
CRF
Left hand
Short action

I know Bighorn makes one, is there a better option I can look/should look into?

Defiance tenacity 6gt (1200 rounds on the barrel that’s installed) Randy Rachel barrel
Foundation MG2
Hawkins dm5 bottom metal
419 arca rail
For end full of lead weight can be removed with little heat.
Trigger tech diamond
Apa fatbastard 3/4-20

The bolt has all brand new internals (firing pin spring ejector, and extractor)

Extras

300ish 1x fired Hornady brass

If it is a FTF sell i will include all the barrels that have roughly 2K rounds on them for practice but this doesn't make sense if i ship them unless the person buying wants to pay for shipping these barrels.

Located in the MEM area and will travel to for a FTF sell. Will split shipping to an FFL

2500 OBO

THESE BINOCULARS HAVE BEEN SOLD

• Bushnell Match Pro ED 15x56 Binoculars BMP1556G used very little.
• EXCELLENT condition and glass
• Built in reticle that can be adjusted separately as the binoculars are adjusted to your eye cant
• Adjustment stop on front so they quickly fit your eyes

$590 shipped to CONUS. PayPal FF please. Happy to provide verification once we connect.

Brand new never been used Foundation Black Sampson Heavy inlet for a 737r. It does come with Hawkins bottom metal.

1700 shipped tyd. Cross posted I have feedback on other forums new to the hide market

2 new, unfired hux wrx flash hiders in 1/2x28
Take offs from factory rifles

95$ each shipped
185$ for both

Three pre-owned items

1. Vortex Razor HD Gen I Angled Spotting Scope - 20-60x85. Comes with original box and padded case, as well as neoprene Gen II sleeve. $650 + $20 Shipping

2. Vortex Razor HD Binoculars - 10x42. Includes original box and bino harness. $700 + $15 Shipping

3. Vortex Razor HD 4000 Rangefinder. $325 + $10 Shipping

In the event you want all three, PM me and we can figure out a bundled price. Will accept PayPal F&F or you can cover the fees, or Venmo, Zelle, Cash local to DFW, TX.

1x Shmedium in black waxed canvas-SOLD: Lightning8
1x 1+1 relatively new from JC steel- SOLD: NiteQwill
Will post pics later.

Throwing this out there to see if anyone is interested in trading.

Vortex Razor Gen II-e 1-6 with the VMR-2 reticle with a MK machining throw lever currently sitting in a Geissele Super Precision mount. Will also come with the original box for the scope. Has a couple small scratches as seen in pictures but overall in great shape. Only has ~100 rounds of 6.8spc on it.

Looking for a NXS 2.5-10 in mil, Atacr 4-16x42 f1 with cash on my end, Maven Rs 1.2 mil, or swfa 3-9 mil with cash on your end.

Would also sell for $1250

9. Barrel is a 1.20” straight Hart barrel chambered by Deep South Tactical in 6CM. Defiance Deviant action AW Cut, foundation centurion stock (has a chip from a barricade fail) with 360 precision weighted rail, bix’n andy TacSport pro trigger.

0 rods on the barrel

$2800

Will trade for the following

MK5 PR2 plus cash on your end
ZCO 5-27 cash on my end
Gen 3 razor plus cash on your end
K525 plus cash on your end

Switching up my hunting rifle. Looking to sell as a package including the following. Not looking to split up at this time. Rifle shot great and killed a couple deer for me with the 110 accubonds. Overall it is in great shape, round count is around 100. Asking $400 tyd

Barrel- Wilson Combat Recon (fluted) 16” 1-11 twist 6.8 SPC II barrel with their black “Tuff Armor” coating. Also including the Aero mid length melonited gas tube that was used for it

Bolt- Wilson Combat NiB coated 6.8 bolt

Loaded ammo-
-42 rounds of 110 Accubond SSA ammo
same lot number
-41 rounds of Hornady custom 120 SST
-8 rounds of 115gr federal fusion

Bullets-
-100pcs 120gr SST unopened
-84pcs 85gr Makers Rex (similar to Barnes lrx)

Dies- Lee 3 die set w/ shell holder

Hello all,

I am selling 488 pieces of once-fired Hornady 6.5 CM brass.

I have sold brass and other items on the Hide and have 100% positive feedback. I will ship NLT 24 hours after payment is received

The price is $140, payable via PP F&F, or you pay the fee. Price includes Shipping TYD

Thanks for looking.

Hi there, I got a Zeiss discount cert and is debating between S3 6-36 and S5 5-25 for prs centerfire rifle. Does anyone have experience with both of them?

Simple question would be: is S5 $700 better than the S3? I have tried my friend's S3 at the range and find the eyebox bit tight comparing to razor gen3 and leupold Mk5, while the clarity is decent.

If the S5 got better eyebox and better glass quality, I personally would think probably it worth the extra cost.

I have a excellent condition RRS TFCT-33 Mk2 SOAR series 3 Anvil 30 tripod for sale. $1000 shipped. Not looking for any trades. Zelle or Venmo. I can provide pics.

I'm switching to an arbor press for seating and selling my traditional seating dies. All in excellent condition. Prices include shipping. Paypal F&F or Venmo F&F.

1. Redding Premium Micrometer 308 Seating Die (from the Premium 2 die set) - SOLD
2. Lyman Pro Micrometer 6.5 Creedmoor Die - SOLD. (I'll throw in the pictured Lee 6.5 Creedmoor sizing die)
3. Forrester Ultra Micrometer 6 Dasher Seater - SOLD

Mitutoyo Digital Micrometer (342-361-30)

These mikes are spot on to the 10 thousandths of an inch. I have a precision Mitutoyo gauge block that I can include for an extra $20 to recalibrate.

• NIST calibration certificate
• 30° Anvil tips (AWESOME for measuring bore and groove diameters)
• Resolution: 0.00005" (0.001 mm)
• Accuracy ±0.0001"

Paid $570 total from McMaster-Carr, I can do $350 shipped CONUS.

Brand new. This has the original extractor. $100 shipped. Paypal F&F or Venmo F&F

This is a professional grade bore scope from Hawkeye / Gradient Lens in excellent condition. It has HD optics / glass that can view bores straight on and from 90 degrees (fits in bores from .17cal and up with incredible detail).

Complete set - adjustable Supernova LED, borescope, 90-deg attachment, Supernova charger (can also remove the 18650 battery and use a separate charger), manual and case.

Purchased this new from Gradient lens (just over $2K). I can do $525 shipped CONUS (paid over $2,100 for it after shipping and taxes)