New in plastic Gen 3 windowed Pmags and center industries metal mags

$12 per mag /buyer pays shipping

Automated VT-TAC. Changing calibers. $40 shipped. Venmo or Paypal

Leica Geovid 10×42 HD-B 2200 Ballistic Rangefinding Binoculars - $1200 Shipped​

Venmo or PP F&F

Great shape
Works great and glass is incredible.
Used for several seasons.

The basement dwellers are gonna finance one helluva bank account for her

InfiRay Rs75 1280 HD Thermal.

One of the best thermals out there with an absolutely amazing image.

Was purchased 7/22/24 so still has over 4.5 years of warranty left. I will include receipt with it. Includes 2 batteries, charging dock, rangefinder, case and manuals.

Found something else i want and dont use this as much as i thought So selling it to recoupe some funds.

16k new, asking 9500 (sold)

Open to partial trades. Interested in other thermals, ffp optics, axmc, or possibly something else.

Looking to sell approx 630 pcs of Lapua 25x47 brass. Has been deprimed sized trimmed and cleaned.

This brass has been fired twice.

Looking to move all the brass shipped for 375$

Holler at me with questions/comments

These are not in their original boxes. I had them in a Plano box so I counted them by weight. Total number may be +/- a few bullets. Currently going for $170/k online right now. Asking $260 shipped for all 1870 of them. They shot great, I just don't have a 40 or 10mm anymore.

-Dan

When I mounted an RDS at 12 o'clock on my SPRecce my first instinct was to zero it at 50 yards the same as my other red dots but I ran the math and realized that probably wasn't ideal for what I wanted. 0-50 yards things looked fine but after that the increased height over bore meant I'd be holding pretty low for 100-200 yard targets, which could be small pepper poppers or gongs. Below is 50 yd zero with 4.6" HOB, red being the hold point and the green circle being the approximate impact area.


Running the numbers for a 25 and 36 yard zero revealed they were pretty horrendous options:



I ended up settling on a 100 yard zero which coincidentally works out close to the same holds as a 50 yard zero that I would typically use with offset sights and lower 1/3 RDS mounts. Below are my holds using the 100 yard zero with a 4.6" HOB, zeroed with pretty standard 55gr ball, however under 200 yards it works pretty much the same with IMI 77 Razor Core.



Like most things it's going to come down to how you intend to use the RDS, if one doesn't perceive ever having the need to engage anything farther than the zero distance then go with God. I view the RDS as an alternate sighting system so I want it to be capable basically from 0-300 yards and why I went the way I did.

What distance are others zeroing their piggy back red dot?

$250 shipped. Still in original boxes. These will ship flat rate. Saves you almost $50 over buying from Bayou at current prices. Digital payment or check accepted.

Hello. I took the barrel off a savage ultralight 280AI to use on a build. I’m selling everything but the barrel, and also selling a 300WM small-shank barrel I don’t need. Everything works great and came off a functioning rifle.

Ultralight stuff
Action+trigger 1lb 14oz - SPF
Bottom metal+magazine 4.5oz - $100
Accu-fit stock + accessory kit (cheek risers, LOP spacers) 1lb 12oz -$50
Leupold 30mm ring/bases 5.5 oz-$50

300WM barrel 2lbs 7oz -$125 (24", SS, small shank.. take off from a Savage Model 16, Sporter contour, 1:10 twist.. matte polished finish. Comes with factory barrel nut, less than 50 rounds down it.)

Can PM more photos if needed.

Looking for either company. For the dies I'll do the set or individual dies. Only interested on FL

I am looking to trade for quality 7mm PRC brass. I am specifically looking for ADG, Peterson, or Gunwerks (ADG) brass. I would like to trade for at least 100 pieces or maybe more for I can. I would trade a Remington/clone Trigger Tech Diamond with flat shoe without bolt release or a new, Carbon Six barrel blank. Barrel is a 30 cal, 1-10 twist, 22” Sendero contour.

Please PM me with what you have.

Thanks!

Hi all, I have 660 pieces of once-fired 6.5 Creedmoor Hornady brass up for sale. Selling in batches of 100, at $40 shipped/100 rounds in the lower 48. All rounds fired through a bolt action rifle.

Buy all 660 for $200 plus shipping.

Brass will ship in original ELDM boxes with retaining plastic.

Venmo preferred.

So as the title suggests, I need a compact scope and the only one I've ever owned are several NF 4-16x42's, which is not one of the scopes I will be considering due to the minimum magnification of 20X. Above all else the most important part of this decision is the GLASS.

Scopes on the short list are:

ZCO 4-20
Kahles 328i
Schmidt and Bender 5-20 Ultra Short

I have a ZCO 5-27, have had 4 Schmidt and Bender's (4-16's and 5-25's) and a Kahles 6-24, so I know the quality of the manufacturers and what they bring to the table, however since the quality of the glass is far more important to me then other features, I need to ask from people that have owned them or done side by side comparisons.

Did I mention the glass is important? Other than that, eyebox and how easy it is to get behind is at the top of the list as well. All other features are a moot point as the scopes will do what I need them to.

First post here.
But I do not even own a fire arm.

Selling my labradar setup. Near perfect condition and still has plastic protector still on the screen. Not used much, and nothing wrong with it. Just decided to go a different direction for my setup. Instructions included for everything.

Includes:

• Labradar (full model, not lite model)
• Grey Ops Labradar ARCA Mount
• 3D printed picatinny aiming mount with look through aiming hole
• North East Texas Tactical picatinny/magnetic mount recoil trigger
• Microphone trigger (for airgun and bows)

$300 TYD. Accept most major payment apps (Paypal, zelle, cash app, venmo, etc.). Buyer pays any extra fee for non-free payment types on any platform.

Post here or PM me if you have any questions. Can provide additional pictures upon request.

I’ve got a Seb Mini now so I’m letting go of my Sinclair F-Class Bipod with Elevation Knob. This one comes with the standard setup for a sling stud as well as a Picatinny adapter. It’s in really nice condition with only a small amount of wear on the sled feet. New $289 + $55 for adapter.
Letting go of this one for $235 Shipped.

October 11 was the opening day for rifle hunting in SC. Sunrise was 727. At 704, I shot an 8 pt at 210 yds. I saw the deer in a wheat food plot on a fire break. Had to use the illuminated reticle on my Nightforce 2.5-20 to be able to see the reticle adequately for the shot. The deer ran about 15 yards. I used a Hornady factory 143 ELDX. I didn’t hit the shoulder bone but the exit wound is shown in the attached picture. I like to hit high in the shoulder but was just back a couple inches. I just acquired the rifle in December 2023. This is the 2nd deer killed (and shot at) with my SP10. Can’t be more pleased with the setup for whitetails. The entrance hole is circled in red. He weighed 148 lbs. Not a big rack but nice start on season. The rifle picture is different day last year but same stand.

Other than Burris, Leupold, and Vortex … I didn’t even know of the manufacturers such as Khales, Nightforce (saw the NF logo in firearms review videos and thought it’s simply NF scopes), and Zeiss until I stumbled upon SH.

Trying to learn more about quality scopes. Assuming that there are more top notch scope manufacturers (forgive my lack of knowledge). Could you please provide me with some options to look into?

New in packaging:

1 - 3/4-24 - YHM-3802-24B 338 Phantom Adapter / Break style - $90 shipped

1 - 5/8-24 - YHM-3802-24A 338 Phantom Adapter / Break style - $90 shipped

Never opened the plastic.

$500 shipped.

Looking to move these 168’s that I was going to use for a 7 saum build and have since determined 6.5cm will be sufficient for any sort of hunting I’ll do. 5 boxes in a sleeve for 500 total. Unopened.

275 shipped

Pp f&f preferred. Pics to follow.

100 pcs of 7 saum ADG brass up for grabs. Opened one to look at the brass. Unfired and unprimed.

190 shipped

Pp f&f preferred.

Looking to move this Carbon 6 blank down the road. It is a 20” 7mm 1:8tw, perfect for your 7PRC, 7SS, 7 saum, etc build. Waited almost a full year for this to be delivered save some money and a year of your time. This is their magnum contour.

Asking 600 shipped to your door or your gunsmith’s door. Pp f&f preferred.

Also have 100pcs Virgin ADG 7 saum brass and 500 7mm 168gr Berger classic hunters that will be in a separate ad.

Used Savage Model 12 FVSS in 300 WSM Laminated Stock w/ After Market Cheek Riser in Stalled Has a Muzzle Brake As well 26" Stainless Fluted Barrel ....Gun is in good but used condition .....I have no other info on this gun I got from a trade and do not know round count or how it shoots ....700 Shipped FFL to FFL