This listing is for a Garmin GPSMAP 66SR and Zoleo. Both are like new with very little use.

I haven't done many back country trips since getting these so they haven't been getting used.

$280.00 for the Garmin GPSMAP 66SR w/ Charging Cord and Original Box / Paperwork

$SOLD$ for the Zoleo w/ Charging Cord

Both prices include shipping via USPS Priority w/ Insurance. Cross posted on e-bay and Rokslide. PayPal friends and family with no note or add 4% for fee's. Want both? Let's make a deal.

Early model EOTech MPO.

Model 557 sight, G23 FTS magnifier.

A little salty; works great, clear lenses. I bought it from a member here a while back. Used it for about 4-500 rounds on a suppressed 11.5" 5.56. Plans have changed, and it's been taking up space for a while.

Trades for/towards:
-XTR II/similar, mil with or without mounting solution
-Griffin SR/Aero/similar 10" handguard,
-Griffin taper mount muzzle device 5.56
-A2 stock/buffer system for ar10

$Sold TYD CONUS

Used once, excellent condition.

$900 shipped Zelle

Used 30moa rail for nucleus gen 1 action. Rail only, no screws. $35 shipped. PayPal FF or Venmo only.

Good morning everyone,

I’ve got a BNIB Black MPA Hybrid Chassis for a REM700 SA with the folding stock. Never been used or even had an action mounted in it. Comes exactly how it would from MPA.

Looking for 950 Shipped OBO. Open to trades but mainly looking for cash.

I’m sure this has been asked a million times but I’m going at the question from a different angle. I just competed in my first prs match this weekend and it was a blast and now I got the itch for a specific use rifle. The rifle I used is my main hunting rifle which is a 6.5prc tikka chopped to 22”, silencerco scythe, 3-12 lrhs , and a stockys vg stock. I shot middle of the pack which I was fairly proud of have never done anything like this but I could definitely tell the recoil was not helping me.
I also don’t want to roast the barrel out of my hunting rifle.

Seems like the default recommendation most make is to get a 6.5 creedmoor when beginning PRS and I’ve got a tikka 24” ctr sitting in my shopping cart ready to check out. My question is will 6.5 creedmoor be enough of a step down in recoil to justify a whole other rifle or should I just got full out and have a 6 dasher or gt spun up?

I should also add I’m in northwestern Montana so the rifle most likely will have to fight decent amount of wind and the shoot I went to this weekend ranged for 200yds to 1430yds.

Like new Foundation Revelation. $900 shipped. Foundation pic rail included. Bipod not included.

Right hand, natural finish, cut for a TL3 and Hawkins M5.

$90 tyd

Selling 2 area 419 high diving boards.
Let me know if you have any questions.

Asking $50 each shipped

Payment via PayPal, Zelle, Venmo

For Sale NEW Unfired Surefire FA762SS And Brake On form 4 In OHIO! $ 5500.00

Have a like new Hawkins 34mm one piece mount 1.27" height in gold anodizing. Would like to trade for the same in black anodize.

I have finally gathered all of the parts for a new hunting rifle. Thanks to SH as all of these parts were purchased from Hide Members or SH Commercial Sale Suppliers.

Defiance Anti-X - 7PRC
Proof CF 24" 1:8
Manners
MCS-LRH Elite Hunter Micro Chassis in Everglades
Hawkins Bottom Metal and Magazine
Nightforce NX8 4-32x50 F1
American Precision Arms .90 Tru-Loc Rings
Flatline Ops Halo-X Scope Level
Triggertech Diamond Model 700 Single Stage
Thunderbeast Ultra 7

American Precision Arms brakes for sale

Little bastard -sold
-

Gen 3 Fat Bastard - sold shipped
- Nitride finish
- 6mm cal
- 5/8x24 thread
I do not have the set screws, but I’m certain APA would send some to you.

These brakes are obviously used. But they still get the job done.

Lower 48 states only

PayPal F&F
Venmo


Thanks for looking

Not sure this qualifies as vintage but pretty sure it's configuration is long out of use.

A few months ago a guy at our club listed a TA01 for sale @ I think $850 (recently recharged for $260 by Triji). I didn't need one but excellent glass to have as a floater so offered him $600. He declined but he also mentioned some wiz bang cool precision rifle SOCOM sniper clone variant from the early 2000s he wants to off for three grand. Never heard of make/model, not in my wheelhouse, and I didn't even have near that to make a counter offer if I was interested. We exchanged niceties but went on our way.

Fast forward to this weekend and he pings me asking if I still want the ACOG, that he'd take $500 for it. I'm all over it. So we agreed to meet and he says he'll bring that rifle along just to check out. Now, he says he'd take two grand for it along with a bit of match ammo. I figure, okay, I just made bonus last quarter so was does it hurt to look at. I tossed my borescope in the car and headed out.

Did a little Google surfing and turns out this is some kind of custom civilian variant of an M40A1 or 3 built by ROBAR in the early 2000s, complete with period correct Leupold Mark 4 10x fixed scope and McMillan stock. Virtually spotless with about 2,000 rounds down the pipe. Originally sold for around $4,500 with a guarantee of half MOA out of the box. Had ever so slight fire crackling at the throat with smooth transition to basically razor sharp lands all the way to the muzzle. I read that this is basically one of the early variants (ala M40) that Chris Kyle used in the early days of the Gulf War.

A quick Zelle transfer on the phone had me driving home with it, the ACOG, and 80 rounds of 175gr Federal Gold Medal Match .308 for $2,300 bucks.

$1,750 for the SR90
$ 500 for the ACOG
$ 50 for 80rds of .308 Match (and a couple little carry cases for the ammo)

Not a bad deal for a random Sunday that just dropped into my lap. Now I need to learn how to shoot for real.

If anyone knows any more about the history and legacy of this fine-built precision rifle I'm all ears and would like to learn.

850 for both.
Only fits the skeetir-x.
skeetir-x not included

mtm 3x magnifier and custom adapter
Larue lt811 fixed mount





has a set nylon tip set screw to retain the magnifier



inside has a soft grip tape to protect the skeet objective and give a friction fit

WTS - Bushnell XRS II 4.5-30 G3. Used for matches and has some rash mark on wind and parallax knobs. Sold

Vision Hybrid Chassis for REM 700 SA with MDT SCS Lite Buttstock. This chassis has never been shot and has only had a barreled action sat in it for about an hour. It has an upgraded ergo grip over the std grip they come with.

Decided to go in a different direction for NRL Hunter Light Open.

Paid $550 for the chassis, $220 for the butt stock, and $40 for the grip.

Price: $640 Shipped.

Used barrels for sale. These barrels are still accurate enough to shoot targets with.

No problem shooting these barrels out to 900 yards. Final sale, the chambers and bores look ok, I do not have a borescope. Priced accordingly.

Please let me know if you have any questions

PayPal F&F
Venmo

Price includes shipping to lower 48 states only.

Thanks for looking



Barrel #1

• Lone Peak Fuzion
• 26” Bartlein 5R - 6mm BR
• Chambered by GA Precision
• 1:7.5 twist - 1.25” straight contour
• 5/8x24 muzzle thread
• Approximately 2k rounds
• Still shooting AVG 1/2 MOA at 100 yards
• 107 SMK - Alpha Brass - Varget
• MV - 2850 fps

FOR SALE as is ———— SOLD





Barrel #2

• Impact 737R
• 26” Hawk Hill - 6mm Creedmoor
• Chambered by L3 Rifles
• 1:7.5 twist - Heavy Palma contour
• 5/8x24 muzzle thread
• Approximately 1200 rounds
• Still shooting AVG 1/2 MOA at 100 yards
• 107 SMK - Alpha brass - H4350
• MV - 2950 fps

FOR SALE as is ————- SOLD

$75 tyd

Modlite 18650 with PLHv2 head and clicky cap - Sold

Arisaka scout mount - $30 shipped

MPA 36mm 1.25 mount - in excellent condition. Sold scope so no longer need it - Sold

Elander Mags - one is used the other two are new in wrapper - $40 shipped for all 3

I have 3 matching lots $520 shipped.

RCBS Matchmaster. Excellent condition and purchased Dec 2023.

$600 tyd

Like new condition. Torqued to spec in ARC M-Brace rings.

Bushnell DMR3 3.5-21x50 (G4P reticle)

ARC M-Brace Rings (24mm-low)

$1100 shipped for scope. $1250 shipped for scope with rings.

I needed to shorten the catch release to use a WSM magazine in an MDT Timbr chassis/stock.

I filed the catch down until the magazine locked in and would not come out pulling on the mag.

It now drops free on recoil.

I replaced the spring. Same problem.

Is the catch too short or too long?

Thanks for the help.