$90 shipped, installed, don’t think I ever shot it.

SOLD

Brand new FDE Surefire Warden.

$250 Shipped SOLD

I have a Christensen Arms MPR 6.5 prc 24” in great shape with less than 100 rounds on it. It shoots the Berger loaded ammo 156gr at around .5” groups. Not interested in trades, just selling. 1500 shipped from my ffl to yours.

Used Trijicon RMR type 2 RM01, 3.25 moa red dot. Great condition. The case that it will be shipped in isn’t the original case for this RMR.

$325 shipped to lower 48

So to start with I am running a 20” WC barrel with a .850 dia section at the GB. I am using a SLR adjustable GB with screws on the bottom with a SLR Ion handguard and there is very minimal clearance. Enough to fit a dollar bill through, or maaaaaaybe two bills stacked together. I do from time to time get fliers and yes I know this happens or it was just me pulling the shot.

So my queation is this. I could remove the material from the bottom of the gasblock to make more room, or have the barrel turned down to .750 and run a new GB. I just don’t know if I tune down the barrel if that will affect the accuracy of the barrel.

And before anyone says it, yes I called SLR and spoke with a very unfriendly and not helpful tech guy that said he has never seen any clearance issues. I’m not saying I know more than these guys, I’m just trying to get my coyote rifle dialed in and to eliminate all the OCD issues that might exist.

-C1 12 O'CLOCK TOP OPTICAL PLATFORM (12TOP FOR ARC ONLY) - AIMPOINT ACRO​

-CONDITION ONE ARC SPACER

50$ tyd. These came with a mount I bought and have no plans for an acro.

2k Factory seconds. These are 131gr seconds and Sierra is the only one who makes them $250 per 1k shipped. Only selling in 1k increments.

Impact 777, RH, mag bolt face. Bartlein 1.25” straight chambered in 7PRC by Straight Jacket Armory, 26” finished length, 1:8 twist, cerakoted black, threaded 3/4x24. Barrel and action has 80 rounds on it. Only selling because I ordered two new barrels and had them chambered for a 787 instead of 777 by mistake.

Shown with an Area419 adapter that will be removed prior to sale. No trigger included. Asking $1975 shipped and insured. Can do FFL to FFL. Will accept PayPal, Venmo, or Zelle.

sold

Looking to buy a DAA Primafill and tubes. can’t find the Primafill anywhere in stock.

Geissele Mk4 rail beautiful DDC comes with barrel nut . Ready to Ship
SOLD $200 shipped

Have four AI mags new may have storage marks. 300 Win. 5 round. $150.00 OBO money order or check with good feedback. Or pickup in west central IN. SPF

Think I purchased these IR lights off this site thought they were off an Humvee years ago and never did anything with them. Have six and a 12 volt to 24 volt power supply. $150.00 USPS money order or check with good feedback. or pickup in west central IN. SOLD

Redding full length sizing bushing die
Includes .286 & .289 bushings

Forster Ultra Micrometer Seating Die

Asking SOLD shipped for the set.

Hi,

Fresh build of an AR-10 in 6.5 CM.

Stag-10 upper and lower receiver set
BA 24" Stainless barrel
Tool Craft High Pressure dual ejector bolt

I've put 90 rounds through it, and it has ran and shot great it is pretty accurate as well.

When manually manipulating the bolt, it is difficult to extract a round out of the chamber by hand. It can be done, but its definitely not smooth or 'easy'.

I have tried both a factory round, as well as a reloaded 'dummy' round that was fired in the rifle, then the shoulder bumped .005". They both behave the same way upon extraction.

The weapon functions as expected with no issues when being fired this is only an issue when manually operating it.

Any ideas? Is this normal? Maybe because of the double ejectors or something?

Way overdue. Looks good to me as a fan of zombie flicks. I know that it is the third movie in the series, but 1st movie in a new trilogy.

Login to view embedded media

WTS: 0 MOA Tikka Stainless Steel Rail from Tikka T3/T3x CTR
$125 shipped domestic US View attachment 8566029

For Sale: NIB Dillon RT1200 Trimmer will include 1 New 223 Dillon Trim Die.
I will include one NIB Dillon XL650 Tool head  OR 1 used Dillon 550 head in good condition, depending on the buyers needs.
$350 $300 $275 shipped USPS flate rate. I accept PP f&f or USPS mo only. 1st PM takes it.

Sold

I have my Dad's BSA Martini Mk II match grade 22LR.
I'd like to mount a modern scope on it. (Sacrilege I know...)
I have a very old scope for it, but it is a fragile monster.
Poor by modern standards... (Thought it was amazing when I last shot it in 1980)

I ordered an Arken 4x16 44mm to put on it.
I've got some 11mm to 30mm rings,
Its got 11mm mounts on the rifle alas they are too far apart for a modern scope.

The barrel is slightly tapered so I can't just mount a longer rail on the same mount points or it won't point right...
(The front mount is thicker than the rear mount to account for this)

The existing 11mm dove tail scope mounts are 10.75" center to center.

Worst case I could buy some 11mm dove tail and mill a tapered round into it.
I have access to a Tormach CNC mill, it would just take hours to setup and get the precision
I think this rifle deserves....

You can see the rifle described here with a nice diagram of showing the scope mounts...

Suggestions?

Tripod has a little bit of wear, but functions without issue.

Included is the "Midwest Offroad" Adapter Plate. I do not believe he is making these anymore. (At the time these cost $115 and allowed you to use the Anvil 30 ball head.)

Tripod Carry Bag and Spiked Feet are also included.

$400 Shipped OBO (Paypal, Venmo, Zelle)

Thank you.

Sniper's Hide matched receiver set. Manufactured by JD Machine Tech. Tight upper/lower receiver fit. The rifle was previously set up as a Mk12 Mod1.

Forged upper and lower receivers, lower is complete with Colt lower parts kit, Geissele SSA trigger, Springco blue buffer spring and H buffer. The upper is stripped and has the Snipers Hide logo on the dust cover.

Low miles and excellent condition...a few rubs from storage and normal use.

$475 plus $25 flat rate shipping. $400 shipped. No trades. Discreet Paypal F&F (preferred), venmo, check/mo.

Super low miles HK45. Originally a Variant 3 but has the LEM conversion (factory kit) and a Gray Guns short reset kit. In addition, it has been converted to optic ready by Wright Armory with their i-DOT conversion. The optic plate is for a Trijicon RMR or Holosuns with the same footprint. If you run a different optic, you can get another plate from Wright Armory. I have two (keeping one) and this is how the HK45 should come from the factory.

All original parts are included as well as two factory mags and an HK case.

$975 shipped. plus $25 flat fee for shipping. No trades. Discreet Paypal F&F (preferred), venmo, check/mo.

Getting rid of most of my reloading stuff - don’t have time to reload anymore.

I will sell each item for the price listed (shipped) or the whole bunch for $750.00 (shipped). If someone buys it all, I will make a few smaller shipments of groups of items.

All of the stuff is lightly used (less than 100 rounds reloaded) and a little dusty, but I will clean it all up before shipment. Manuals included for most of the items. Those items listed with a top plate have an Inline Fabrication top plate attached which mounts to the ultra mount.

The list:
- SOLD Inline Fabrication 4” tall micro quick change ultra mount with base plate installed and three single storage docks: $50 SOLD
- SOLD Lee Loadall II 20 gage with top plate: $50 SOLD
- SOLD MEC Sizemaster 12 gage with mounting plate: $175 SOLD
- SOLD Lyman Brass-Smith Ideal Press with top plate: $85 SOLD
- Hornady digital bench scale: $50
- Hornady M-1 Case Tumbler: $50
- Hornady Neck Turn Tool with top plate: $75
- Hornady Cam-lock case trimmer with top plate: $75
- Hornady Concentricity tool with top plate: $75
- Hornady Case Dryer: $50
- SOLD Annealeez Annealer (I think it’s Gen II): $100 SOLD
- Hornady Case Prep Trio: $75
- Hornady sonic cleaner (1.2 L): $75
- Hornady Auto Charge digital powder scale and dispenser: $150

PayPal only