New in box Triggertech Diamond Single Stage trigger for AR10s.

Price: $255 shipped

I accept paypal friends and family and USPS Postal Money Orders. Please see my feedback, many happy customers.

WTS turn-key varmint rig in excellent condition: Volquartsen 17 WSM with carbon barrel, carbon fiber stock, 4 mags, Badger rings, S&B Classic Mildot 4-16 (heavy rings marks from the Tenaebrex cover install), 3550 rounds of various ammo (2900 rounds of AE 20gr Tipped Varmint, 250 rounds of 25gr Win Varmint HE, 500 rounds of Hornady 20gr VMAX).
Price - $3750 shipped to FFL
Trades - NONE
Terms - NOT SPLITTING UP PACKAGE
Payment - cash, USPS MO, cashier’s check (it will need to clear first)

For sale like new Spuhr 4006 scope mount in box.

Price: $350 shipped

I accept Paypal friends and family and USPS Postal Money Orders. See my feedback, many happy customers.

Asking shipped. I have a level I can throw in with it.

As close to new as it can get, outstanding as new condition, lenses perfect, always stored with a neoprene cover on it and comes with everything. Pics have all the accessories on including the larger elevation turret, larger parallax wheel, throw lever, sunshade and flip caps. Wide angle eyepiece. Only shot a couple of times on my 7mm PRC. $2,150 shipped insured lower 48. Bank or cashiers check or postal money orders, or paypal f/f thanks.

2x New boxes of 100 and an open box with 70 in it, around 20 were pulls. $140

Trades:
Berger 6mm 105 hybrids
MPA DN5
Sierra .224 77smk
Hornady 75 eldm
Impact precision 223 bolt

On my AR 15 the brass ejects at about 4:30PM from the ejection port, very consistent. It's where it always has thrown spent brass. No issues.
On my AR10 308 it's throwing them out at about 1PM from the ejection port. I have an SLR adjustable gas block set to function consistently. Is there anything I can look at to get the AR10 to eject like the AR15 (4:30PM). Or does it really make any difference?
AERO Precision upper and lower, AERO mlok handguard, Craddock Precision barrel 18" (Bartlein 1:11.25) with headspaced JP bolt, Triggertech Diamond trigger.

6 and 6.5 have been sold to RubiconJoey.
30cal left for $150 shipped.

Trades:
Berger 6mm 105 hybrids
MPA DN5 30cal
Sierra .224 77smk
Hornady 75 eldm
Impact precision 223 bolt

Anybody flying around the disaster AO in fixed wing ultralight airplanes? Doing recon/scout/messenger/light pax duty?

2 seat Quicksilver can be maybe available. Radio comms problematic, but please advise.

Very nice set of ARMS 30mm #22 Low Rings.
They’re in like new condition. 110 shipped.

Looking to buy some ELEY 22lr. would prefer TENEX but I'd try the others as well.

Does anyone have experience with both? I have experience with the Vortex 5000 lrf. I like the Vortex, but I can save a couple of hundo if I were to go with the Burris.

Recently picked up an OCL Polonium and am a fan, aside from all the salty hot lead in my face. Currently have been using it on a 16" barrel with a mid length gas system and a .750 low-profile gas block. In general I should be able to use a can on it for most of the ranges and what I go to, but I imagine there might some times I'll run it without the can on it. The Riflespeed AGB looks cooler and I like the idea of the adjustability without a tool. If I've read correctly on some other posts here aside form the AGB I'd likely need a straight gas tube as well, which they sell. The other option would be a Superlative AGB, which a few friends have recommended, though there's a lot of hand guard for the accompanying tool to go down past (and I half assume it'll get lost at some point.)

Anything else I should have in mind in choosing between the two of them, or is there any other option I should check out?

Spur mount
34mm
0 Mil/0 MOA cant
SP-4001

Got as a partial trade for a gun, however I have no use for it currently.
$360 Venmo/zelle/money order shipped insured w/tracking ConUS

*included leveling shim

Looking for a Spuhr 34mm Scope Mount with 0 MOA Slope.

LMK what you have and price.

Thx

100 pieces of once fired Lapua brass $85 shipped
100 pieces of once fired Norma brass $35 shipped
200 pieces of once fired Hornady brass $35shipped per 100 pieces
100 Pieces of once fired Hornady 300 win mag brass $65 shipped.

Having just seen the recent thread on the 7mm PRC. I was wondering the same about the 300 PRC I am thinking of having a Remington 40x in 7mm magnum re-barrreled to 300 PRC. I have engaged a gunsmith to work on this and was wondering what opinions are out there about a project like this. It is a single shot so it is at a disadvantage at an ELR but only one person can win that anyway. I think it would be fun to try this combination. Appreciate any comments positive or negative but would like to see Bear Pit comments stay there.

Athlon ares g2 uhd 20-60×85 spotting scope, come with box, cover and magview adaptor. $650 shipped…

6.5mm ACE Brake 5/8x24 threads

Only put about 150 rounds through it or so, my new rifle came with a brake on it so just going to run the factory one instead

$150 shipped to your door OBO

PayPal, Venmo, ApplePay

Pics were from a couple days ago, can provide updated ones with current date if needed

Redding 2 die premium die set 6.5 PRC. $100 shipped

Excellent condition. I was using it to seat 6BRA and I finally got a BRA specific die so I no longer need this.
$75 shipped

Used beggars B-14 HMR. Has 180 rounds through the barrel. $900 shipped to your ffl. I’m in Cheyenne Wyoming so if you’re within driving distance we can work something out. I also have some lapua brass. 40 rounds once fired 60 virgin I can through in for another $50

Hey folks , I have a Tikka t3x Upr for sale , it has a 24” barrel and is chambered in 6.5 creedmoor. The rifle has about 180 rounds though it and shoots excellent .Asking 1200$ shipped obo. Feel free to text or call me with any questions at 516-401-3055, thank you, John