Looking to sell my armageddon gear game changer X bag. Basically brand new. Brown waxed canvas, heavy sand fill.

Looking for $110 sold

For the experts on here - do you guys figure out what COAL your chamber likes first, and then test powder loads at that seating depth, or do you pick your powder load and then test varying seating depths to dial it in? It doesn't seem like you can work on both at the same time - or can you?

Lightly used Vortex Razor Gen 3 6-36x56 - took this off my back up rig so got very little action.

Comes with sun shade, zoom throw lever and MK machining parallax throw lever installed. I can also throw in a IDTS tape for it.

$2000 Shipped CONUS

For the month of October get a new ZRO Delta rifle for $525. Some of the best quality control in business here in NC.
Includes
7075 Forged Receiver Set
16” 1:8 .223 Wylde Nitride Barrel
Ambi Bolt Release
A2 Flash Hider
ELG Fire Control group
Mission First Minimalist Stock & Grip. FDE, gray, OD green, vortex bronze color, $50 extra

Brand new MDT one pice scope mount, 34mm, high. $300 Shipped. Not interested in trades. MDT Sku 106913-BLK.

But what a game!

One piece scope mount from MPA - rock solid...

34mm
1.125" Height
0 Cant

$175 Shipped CONUS

$2000 shipped in the box as pictured - **Mount not included** Please PM

Trades considered - 5.5x50mm ACOG, 2.5-12x42 Accupoint Green MOA dot specifically, Gen 3 1-10 Razor

Per sales descriptions on line -

The ATACR Riflescopes are designed to maximize the the potential accuracy of semiautomatic and bolt action rifles while also offering the revered bomb-proof durability Nightforce optics are known for. They feature a one-piece tube precision machined from a solid bar stock of 6061-T6 aircraft-grade aluminum alloy. The tube is two to three times thicker than riflescopes of a lesser quality, resulting in less overall stress, greater thermal stability, a consistent zero and a virtually impervious shield for the precision optics within. The lenses are matched and aligned by hand in a process called optical indexing to ensure the highest possible optical performance. The objective lens utilizes a multi-element design like those found in the highest quality telescopes to focus light rays more precisely for exceptional image clarity and color accuracy. Optical performance is further enhanced thanks to multi-coated ED glass that results in superb light transmission, brilliant images, and exceptional color contrast. The elevation turret on ATACR Riflescopes are equipped with Nightforce’s ZeroStop Technology to provide an instant return to zero after making adjustments in the field. After sighting in your rifle, simply set the ZeroStop to create a positive mechanical stopping point at your chosen zero point. Then, no matter how many elevation adjustments you make, turning the elevation knob down to the ZeroStop setting returns you to your original zero, completely by feel—even in total darkness or while wearing gloves. The internal mechanisms on the windage and elevation turrets are held in place by a specially designed spring that spends two weeks in a polishing tumbler before being installed in the optic to deliver perfectly smooth operation. This guarantees zero loss of integrity, zero loss of repeatability.

Nightforce is already known for ruggedness and reliability in their riflescope lines, and the ATACR is no exception; building from his foundation, the scope has many features, including:

• Parallax adjustment - 45 yards - infinity
• Integrated Throw Lever
• Xtreme Speed Thread
• Hi-Speed ZeroStop
• DigIllum reticle illumination

I have a Microtech LUDT with tan anodized handle and black standard blade (204P Steel). It was a user, but has been sent in to Microtech recently for sharpening. The action is very snappy and it is sharp. Marks on the body and blade from use, but nothing major and everything functions perfectly.

Comes in factory box with lanyard and docs.

Asking $175 shipped, no trades.

PayPal FF, Venmo, or Zelle for payment.

Hawkins Hunter LA DBM. Taken to the range a couple times, otherwise I’m excellent condition. $160 shipped. Sold

ARC rings 36mm, 28mm height. Like new. $90

Leupold Mark 4 rings 35mm, 1.06 in height. Like new. $70

PayPal F&F

Thanks

---

Hello to the lovely person who is reading this post right now, hope you are having a wonderful day!
Just want to (finally) introduce myself to this forum. I have been lurking around SH for a very long time but been too busy with my work so I only get to purchase firearms locally, but now I'm retired and looking to do more trades and learn a lot about hunting cus I'll be going hunting frequently with my Third son because he shows a lot of interest in hunting.
Less I forget, I'm from Hubbard Iowa
Thank you all

i have a kestrel 5700 elite ab, sn#2160498. i have down loaded the latest firmware. i have had it for years, i used to be really into the precision rifle stuff. i bought the weather vane for it, etc. but it has always given me problems. but i think i am onto something finally. i've been getting ready for an elk hunt so i've been playing with 5 guns, Defensive edge 338 ai terminater, a kirby allen 338 ai raptor, 2 different GAP built 6.5 saums, and a Coffin custom 7mm rem mag. all very nice guns. as i was getting re-aquainted with them and trying different ammo, i noticed a pattern that using the kestrel
they were all shooting low, .1-.2 mils in the 400-500 yd range, and also shooting low out to 900 yds. finally yesterday, a local dedicated shooter let me borrow his similiar kestrel at the range. i downloaded 3 of my profiles, 6.5 saum, 338 raptor, and 7mm onto his kestrel. i then compared them side by side with the exact same profile. ignoring the wind calls, ( i didn't make the wind the same, only the target distance and direction (395 yds, and 175 deg) as you can see from the pics, his kestrel always had about a .1 mil higher solution,, i also compared all the weather numbers. our weather numbers were kinda close but no where near exactly the same, there has to be some input that is acting on all my profiles to make them shoot low. the weather numbers didn't match but they were close,,, i don't know how important all the weather numbers need to be. pics to follow. mine is the tan one
it has always done this and i usually do a profile calibration with the mv, but i have a nice labradar so i know my ave mv. and it is decent ammo so pretty low es and sd

any thoughts? i am cross posting this

$825 Shipped - Basically new. Used on a hunt 1 time.
No marks and glass is perfect. Just going to keep rocking my traditional glass. Don’t have box or case. Just what you see.
$825 shipped. Text or call with questions
615-866-8036
Franklin, Tennessee area 37064

Trued Remington Model 700 Long Action
Bolt was fluted by LRI
LRI Bolt Shroud Faceting
Timney Calvin Elite Single Stage Trigger
26” Proof Light Sendero Carbon Barrel Chambered in 28 nosler by northwest precision rifles.
MBM Lil Beast 4 port brake
Nightforce 20MOA Rail

Round count is around 500, barrel looks rough when bore scoped. Still shot good when pulled from the stock I used on another build.

$725

17" forearm
Factory cerakote grey. Not a blem.
Has grip, thumb rest, bag rider, integrated arca

$550 shipped

First is a Grey Birch LaChassis. Decided to go in another direction. Comes with their grip. Nice lightweight/folding chassis. Has a 16" arca handguard and integrated bubble level. This is Black anodized, not the clear anodized. Blue tape is holding the action screw

$800 shipped






Next is an XLR Envy Pro w/ JV Pro kit. Bought this here used. Put a Vudoo in it as a backup gun. Buddy wanted the Vudoo but already had a chassis so this is for sale again.
$850 shipped




Next is a Sharps Heatseeker chassis. Extremely good shape. Just decided to go in a different direction.
$350 shipped



XLR Element 4.0. Aluminum Rem 700 short action chassis. Comes with
Thumb rest
Bag rider
Butt stock weight
Buffer tube weight
Over $900 package
Sell for $625 shipped

I have a 20 moa base which I think gives me 5.8 mils, 10 mils of holdover in my reticle and 18.8 mils left on my turret does that mean I have 34.6 (i.e. 5.8 + 10 + 18.8 ) of elevation to work with or does it not work that way? tia

Was hoping for help in determining what the detent looks like on the elevation turret on an S&B Klassik 3-12x42. Just bought it new loosened the two top screws, misreading the manual for another model. Heard the detent hit the bench, but haven’t been able to find it. I must be the first one to do this or maybe the first one to admit it.

Honestly, I don’t know what I am even looking for. The one pic I found in this forum, it just looked like a small ball bearing but I can’t see how that would be captured by the turret.

Pic shows the hole, thankfully the spring is still there.

Any help or pics are appreciated.

Selling a used in good shape Nordic Components NC22 sliding stock:

A non-revealing small foot print, making your weapon super compact for storage and carry.
Developed for the NC22 upper.....we also made sure that it fits our stock kit for the10/22 as well as the Ruger SR22
Identical in weight to a collapsible M4 Stock.
Deploying the stock is easily accomplished by pulling out on the butt plate
This butt stock gives you six length of pull options between 8-7/8" and 13-7/8", plus a fully collapsed LOP of 5-7/8".

$125 shipped, PPFNF

Thanks for looking

Selling new never fired alpha ocd 6 dasher brass. Just opened it to look at it and that’s it. Cardboard wrapper thing not included as I ripped it. Going to a different caliber than anticipated.

$220 shipped for both OR $115 each shipped
PayPal ff or cash app

HK416, 416D style front and rear sight set. MP5 type, rear adjustable diopter. This is an aluminum reproduction/clone set. The rear base is compatible with factory MP5 sights as well - $115 SOLD

CZ Scorpion Evo front and rear sight - $115 $90

Trijicon MRO, 2 moa red dot, comes with high, low mount, scope coat and box - $375 $325

PPFAF, prices include shipping

Thanks for looking

MPA One Piece Scope Mount 36mm - 1.250" - 0 Cant

Brand new in box, never used it.

$200 Shipped CONUS

Bought this for a 223 conversion only to find out AT-XC takes a different bolt.

$1250 shipped-SOLD

I haven't found any threads comparing these 2 yet. Wonder if there just aren't many people who have had time behind the vision pro.

I'm in the market for a new chassis to replace my PRS-TCS. The distance from grip to trigger is just too big for my hands. I'd like to go with chassis over stock for added adjustability also. This will be used for PRS.

At first glance they look very similar. The buttstocks are different and I do like the adjustable bag rider on the vision. Price wise is very similar here in Canada. Vision is 10% more. Not sure its enough to make a difference, but MDT also has a wicked black friday sale that I could have some luck in this year making it a little cheaper. I like how the Vision is ambi, seeing as I'm a lefty, and if I decide to sell it for whatever reason I have a bigger market to sell to. I'll most likely be adding accessories to it as well, like a control bridge or weights.

Wondering what people think about the differences between the 2 and if one was a clear winner (for those who have handled both).

Sightron SVIII 5-40x56. It has 10 meter parallax, 40mm tube, LRM reticle and Audere one piece mount. Thing as shown weighs in at almost 4 pounds. $1800 shipped Paypal G&S I'll eat the %. That way you're protected as so am I. Selling as I think my PRS days are behind me and postponing the ELR wants. I'll answer any questions I can