Switching to Nightforce ATACR 7-35 on my 6.5 bolt and interested in experience/thoughts on one over the other and why? Will have either bubble or send it and both have their own mount for each so curious pros/cons to each…appreciate any input !

Never used in the field. Only a safe queen. Comes with neoprene cover and lens caps.

Here’s my DD5V4 7.62x51
Proof carbon 18” barrel
Trigger tech trigger
Key-mo muzzle break

Asking $2250 obo

As is

has small scratches from use, this gun has seen a range more than once and is not a safe Queen barrel has roughly 300 rnds through it

Comes with original trigger and barrel

Pm for payment details

JUL 1-3, 1863... (161 years ago for those here challenged by math) things were pretty dang rough here in our country. Far more turmoil than issues like open borders, corrupt media, pandemics, or questionable leadership brings to the table presently but sure that was present even then.

I'm talking about 4 years of absolute carnage, brother against brother- bayonet against bayonet style of fighting... over convictions and an established moral code (yep I said it/summarized it) over how a population would be governed just shy of 100 years into our country's establishment.

With that preface- while we were absolutely tearing ourselves apart nationally, there was one speech, that lasted all but 2 minutes that forever went into history and while I'd have to imagine most of our members here learned about it in school (however many years ago), we can all benefit by a refresher...


"Four score and seven years ago our fathers brought forth on this continent, a new nation, conceived in Liberty, and dedicated to the proposition that all men are created equal.

Now we are engaged in a great civil war, testing whether that nation, or any nation so conceived and so dedicated, can long endure. We are met on a great battle-field of that war. We have come to dedicate a portion of that field, as a final resting place for those who here gave their lives that that nation might live. It is altogether fitting and proper that we should do this.

But, in a larger sense, we can not dedicate—we can not consecrate—we can not hallow—this ground. The brave men, living and dead, who struggled here, have consecrated it, far above our poor power to add or detract. The world will little note, nor long remember what we say here, but it can never forget what they did here. It is for us the living, rather, to be dedicated here to the unfinished work which they who fought here have thus far so nobly advanced. It is rather for us to be here dedicated to the great task remaining before us—that from these honored dead we take increased devotion to that cause for which they gave the last full measure of devotion—that we here highly resolve that these dead shall not have died in vain—that this nation, under God, shall have a new birth of freedom—and that government of the people, by the people, for the people, shall not perish from the earth."

-Abraham Lincoln

anyone else watching this? it's incredibly painful. it's almost like they're cheering so he won't have the time to embarrass the party.

Can muzzle brakes cause high ES/SD? From time to time I see forums comments saying that they can.
Have you ever observed this personally? For those that have to shoot with brakes, it would be useful to know which brands to avoid.

Then Eric Cortina said in one of his videos that his EC tuner brake diverts gas in a way that will reduce ES/SD. What are your thoughts? Has anyone been able to confirm this via testing? Login to view embedded media

Looking to trade my 5-25 for something smaller. Ziess s3, leupold 3-18 maybe others. Mil only

This thing has been well used and shows it but all works fine as it should. Glass is clean. H2CMR reticle

$95 shipped

Had this on my 22, has seen about 6 matches. Lived in a scope wrap for most of it, very slight ring marks. Elevation dial was marred, functions fine, cosmetic only. Glass is perfect, sunshade is unused. Include vortex flip caps, slight tape residue.

$2200 shipped
Zelle, Venmo, PayPal G&S (+3%)

Area 419 ammo novel $50 spf
Mub mount with rrs mini ball head $250 spf
Bottom metal short action radom $25 spf
Red snake bottom metal $75spf
Nova grade phone adapter $25
Gun cover $40 spf
Pouches $30 spf
Ghile twine 3 to 4 bags mostly there $10 a bag
Bundle a few items I'll make you a better deal thanks for looking

Used a couple times upgraded to the garmin.
$100 shipped

I went to ThunderValley today and shot my 10.5 inch 6.5 Grendel full Alexander arms build out to 1k. This was off a front bag and a brace on the back, which is not a very stable plat form Only thing changed on the grendel was the trigger. I was shooting 123 eld-m and was averaging 2316 putting my transonic out to 1075.

I shot 10 rounds out to 1k I had a 10-15 mile an hour swirling wind. 400 wind was showing 7:30 1k flag was showing full value to 3. 1 mile wind flag was wrapping it self around the pole. Welcome to Thunder Valley..... Also this was in a down poor.


Scope eotech 1-10........

3-10 rounds impacted......... lots of rounds off right and left edge. I would easily say 8-10 would have hit a full larue. I have shooting at a 12 inch square.

I has the same muzzle energy as a 9mm at point blank. Impressed to say the least.

Great condition pst gen 2 5-25 ebr7 reticle. $600 shipped with vortex rings.

Just got this a couple months ago and while I really really like it I’ve decided I want something heavier and more traditional for the rifle it was being used on. It has been to the range a couple times but has not been hunted with.

The Soldier Mountain Arms HNT 26 Recoil Lug Well has been installed and the recoil lug area only has been bedded for an ARC Coup De Grace. Easily removed or modified with a dremel if needed.

MDT HNT 26 Chassis
- Rem 700 Long Action
- Right Hand
- Folding
- Full ARCA Rail
- Newer 3 Screw Foreend
- Standard Butt Pad
- TI Action Screws
- Magazine Rattle Reducing Inserts
- Four LOP Spacers

EXTRAS:
- MDT Vertical Adjustment Butt Plate
- MDT Thick Rubber Butt Pad
- Backfire Backstop Recoil Pad with Protector
- Wiebad Mini Stock Pad
- SMA HNT26 Fix Recoil Lug Well
- MKM Precision Vertical Crossover Grip ODG

$SOLD TYD via Venmo/PayPal. Ships USPS Insured with tracking.

28 height basically new
$110

Badger Ordnance 34 MM Medium Scope Rings
$130 SOLD
Priced to move !

Nightforce ATACR 5-25x56 F2 with illuminated Mil-R reticle, pictures up soon, some wear marks, comes with bikini cover.

$1800 shipped. SOLD

Wtb 700 clone action. Used but not abused preferred. Rh 308. Thanks

8 lbs
Win 760 $240
H380 $ 240

1lbs
H380 $30
H332 $30

Whats the story with the casper area? Is there any good elk hunting around there? How is the crime, cost of living? is it predominately republican or democrat? I have lived in northern MN and the Fargo area so I know what bad winters are like. I would like to eventually retire in wyoming. I have traveled the northern half of the state, but never down by casper or cheyene. I would like to get some acreage to shoot on. I grew up on a farm and have lived in the country on acreage most of my life. What can you guys tell me that I should know?

CQ/T 1-3x14 w/ amber circle dot reticle

$450 Shipped

I have a location were we can shoot at night. And we are planning a night shoot. I have done a few stages at night., but could use more, all targets are steel and will be inside 750 yards
I have shooting off jeep lights
Back lit targets
Front lit targets
Yellow strobe light
Road flares red light
Candle light
Any other ideas please chime in.

/Does seekins sell the buffer and spring separately from the sp10 or sp10m? I'm building one(the 10m is hard to find) and i love flat wire springs which that uses and the only good one i can find is the Tubb but i heard the seekins is a 60 coil vs a 42 coil.

EO TECH SR5 1-10 FDE

Optic is new

Not looking for trades

$1100 shipped and insured.

BNIB Vortex Razor LHT 4.5-22 XLR-2 MRAD FFP - $1100 TYD Sold to @zbender

BNIB Leupold Mark 4HD 8-32 PR2 FFP - $1300 TYD Sold to @gwilett13

Seeing if anyone can confirm an issue I am having with a mdt precision bottom metal I am using for a build.

I bought a manners pro hunter with m5 mini chassis. I received this mdt bottom metal and tried to mount the action. The bottom metal doesn’t fully contact the manners mini chassis. The bottom metal “lip” is contacting the bottom of the stock (circled in red).

I sent both the bottom metal and stock to
Manners and they had it for a cpl weeks trying to determine if they could make it work. They even contacted mdt. In the end I decided to have them ship it back and ordered Hawkins bottom metal.

Does anyone have mdt bottom metal they can confirm has this same lip? I sent the photos to mdt and they said it’s normal, but it doesn’t look right. It has a weird step up that doesn’t flow from front to back. Any photos to compare would be great! I have seen others use this same combo which is making me question the one I have.