Asking $3800 (scope only) shipped buyer will pay insurance if you want.


Scope - Tangent Theta 525 Gen3XR reticle **missing rear tenebrex cap from a match couple years ago** has box/papers/kill flash ect.

Have a nice set of Vortex Fury HD 5000 rangefinding binos for sale. These are a few years old, but have been babied. Work great, never had any issues. Comes with the soft vortex carry case.

$oLD

Have 2 Black Branch Gecko 2 barricade bags. Both like new, no tears or wear signs.

White is buckwheat fill
Green is standard fill (has black sharpie on it where name was blacked out)

Asking $65 each or $100 for both shipped.

I’ve got a 16” AR10 in 6.5 Creedmoor that I shoot in some local gas gun matches. Targets are 200-1000, so I want decent magnification, but I don’t want/need more more than 25x top end.

This gun currently wears a Zeiss LRP S3 6-36 that is destined for a 22” AR10 in 6.5 CM when the Bartlein barrel finally comes in, so I’m evaluating what glass I want on this gun once the 22” upper is done.

Budget is up to $2000, but realistically would like to keep it around $1500. I’m thinking I want something in the 3/4-18/21 mag ranges to keep the gun somewhat handy, by still capable of making reliable hits at the extended ranges this barrel and cartridge combo offer.

So far my list consists of
- Leupold Mk 4HD 4.5-18 PR2
- Bushnell DMRIII 3-21
- Steiner T6xi 3-18
- Athlon Ares ETR 3-18 (on sale at Midway)

Currently leaning toward the Leupold because of the glass quality for the price.

Is there anything else in this mag range and budget I should be considering?

Attached is a photo of the gun with the current scope.

I am looking at purchasing a Forster Co-Ax and mounting it to a very sturdy bench; however, the bench is very shallow bench only extends 13” away the wall.

Can someone tell me when the ram handle is up will it hit my wall if mounted to such a shallow bench?… and does adding an Inline Fabrication elevated mount change the needed distance to clear the wall behind it?

As the title states, I’m looking for a Geissele 45 degree SMR QD swivel mount

Hello Hide,
For sale is a brand new Area 419 Hellfire Match muzzle brake for .30 cal. projectiles, in packaging. GF grabbed this off a prize table without realizing that it is different that the Sidewinder versions I run on other rifles.

I'm asking $130 via Paypal Friend to Friend or Zelle.

Let me know if you have any questions.
Vivacious

Works like it should. I just haven’t used it in a while,

$40 shipped

APR Custom
6 Dasher
20" APR Carbon Fiber 1-7.5 Twist
5/8X24 W/ Knurled Thread Protector
APR V2 Controlled Feed 20 MOA
APR BDL Bottom Metal
TriggerTech Special
McMillan APR Hunter Carbon Fiber
Seekins 30mm Rings
Vortex LHT 3-15 Optic
8 Lbs 8 Oz W/ Optic
Lightly used, $4000

I have two of these, ill do $100 shipped for both

Looking for a 6.5 Creedmoor barreled action or possibly whole rifle. Want a custom action (Defiance/Stiller/Surgeon/Impact/etc) and a cut rifled barrel at 24"-26" If it's in a stock would prefer a Manners/McMillan/KRG bravo.

I have a Ballistic Advantage 16" 223 Wylde SPR Fluted barrel 1/8 twist. It is their Premium Series barrel that is 416R Stainless Steel, mid length gas system and a 750 gas block. It will come with the BCM gas block and gas tube. I did paint the barrel fde and that can be removed quite easily if you do not want the paint on it. I have around 150 rounds on it. This barrel is an moa shooter with anything from 55 to 77. It was sub moa with the Berger 77 OTM rounds I put through it.
$175 shipped

New MPA Ultra Bag Rider II.
Cross posted

Asking $40 shipped.

Hey fellas,

I’m running a Gen 1 AT-X, and currently have over 2k rounds through the action.
Until just recently, I’ve used the 6.5CM factory barrel. I have since switched to a 308 barrel.

I’m running a light charge 308 loading, and I’m having my bolt stick at the very last part of the cycle. The last stroke of the bolt cycle where the cocking lever disengages with the trigger assembly (forgive my ignorance if I have the nomenclature incorrect.)

What I’m saying is, there are no signs of pressure on the brass, the bolt lifts perfectly fine and easy until the very last bit, and I have to lift it hard to get it to release….I’ve cleaned the chamber and made sure I have no lube on my brass, but the bolt still does this sticking action almost every cycle….sometimes it works just fine though.

Any thoughts? I’d appreciate a fresh set of brains to help me make sure I’m not missing something.

I will say that my brass is older and likely in need of replacing. I plan to shoot some factory ammunition today to see if it replicates.

Thanks boys!!!

Used Warne precision level & data card holder for Warne precision scope mounts. Cross posted

Asking $45 shipped for both.

Used Kelbly Claw 6.5 self-timing nitrided brake. 5/8x24tpi
cross posted

Asking $100 Shipped

Title says it all, or most at least. I have a 2-stage special pro curved and would like to trade for a single stage Trigger Tech special. I will only trade for a Pro Curved model.

Mine is very lightly used. I put it in a Aero Solus action and took it out once.

Open package like new MDT 30moa pic rail for Savage Mark II actions. Cross posted.

Asking $60 shipped.

Crimson Trace LG-305 for a Smith J-Frame.

Works great, just moved to a standard boot grip.

$150 shipped

Selling my Tangent Theta 5-25x Professional Gen2xr reticle with aadland throw lever

Updated 10/9/24

This is everything I have left that is Desert Tech.

Covert handguard w/ torque wrench and hardware - SOLD
Magnum bolt assembly 300wm - $295 shipped SOLD
Magnum bolt head stripped - $50 shipped
Full length Arca rail (extends to grip) - $95 shipped
Short action spacer - free if you buy something else SOLD

I am selling Nightforce 1-8x24 F1, illum, FC-mil reticle. It comes with the Badger Ordnance mount.

No trades please

1200$ shipped optic
200$ shipped mount

For a 1-3 day backpack hunt, who makes a fairly all inclusive med pack to keep in your backpack that contains all the essentials?

Looking to put together a range toy bolt gun in .223. Primary use of the rifle will be to just have some fun at the range and in the reloading room. Will also be used to introduce new shooters to precision style rifle shooting. Admittedly, I’m a Tikka fan but finding anything in .223 with more than a 3-4 round magazine is virtually nonexistent. With that, I’m looking at picking up a Howa Mini Action from Brownells and dropping it in a chassis (Oryx or XRS). I recently came across the Savage Axis II Precision which essentially comes in an Oryx chassis from Savage. Price is close enough to not matter.

Which would you choose and why? Looking to stay at or under $1000 for the rifle/chassis so if you have other ideas that fit that criteria, please feel free to share those.

Thanks in advance!