Up for sale is a like new R3 3300 pack from Stone Glacier. It has never been out of my basement. It was bought for some western hunts that never happened. There is nothing wrong with it. The belt size is large.

It will come with (2) accessory Pockets, (2) R3 Side Bags, and the Tac weapon Sling.

Will Take $450 Shipped Lower 48

Leica Geovid Pro 10x42’s

Like new, no marks or scratches. Used a couple times hunting and always in a bino harness. Glass is perfect.
Comes with box, manual, lens caps, case etc.

$2300 OBO shipped

Trump can pardon himself now and not feel guilty.....LOL

pretty much new 10rnds down the pipe stacked 3 shots on to of each other with a old 257 load I used years ago will supply data for load I will get a pick up later 650.00 Venmo or zelle, also have a Meosport R https://cameralandny.com/shop/meopt...M0FhqwU3OMnpoK8LIa0T-8BN64gZNiOTBoxOu-_DpBNgp I will add for 250.00

I am looking for a mini scout light. Right now the surefire mini 350s are on sale at primary arms for $210

But part of me wonders if I should get an arisaka 18350 or the mod light version if it, both are around $280+

This is going on the pic rail of a Tavor for Run n Gun white light matches. Tail cap doesn’t have to be crazy, I would just turn on during the load and make ready portion so I don’t need a tape switch at the moment. Ranges sub 200 yards

Anyone who has tried an arisaka or mod light, are they basically worth the extra $100 over the surefire?

I have decided to try the Vector-x binos so selling my Revic BR4 rangefinder. Purchased from Optics Planet in March of 2022, used it for a few hunts and to the range a few times, then promptly deployed overseas in 2023-2024. In short, not much use. It has been updated to latest firmware and everything works just as designed. Asking $900 shipped.

Vortex Razor HD Gen 2 4.5-27x56 EBR-7C MRAD asking 2200 + shipping.
Includes one hundred concepts covers, very very lightly used, only been shot on a 22creedmoor maybe 40-50 rounds. Decided to go with a lighter scope setup for hunting.

I’m looking for suggestions about an adapter for an Anvil 30. I searched Mid-west off-road and he hasn’t been on here in a while, guess he’s out of the business. Does anybody know of another maker? This is going on an Artcise/innorel tripod if that matters.

Andy

Ultralight Tactical Scope Rings, tube-diameter: 35mm, height: Low 0.885" With offset bubble.

Used but fairly good condition. The white paint are witness marks.

120 tyd Zelle/venmo

NIB, Impact 4000 for sale. These are super nice if you haven’t tried one. Asking SOLD shipped to lower 48

This is my review of the AIM FS-42 folding stock bag. Mine is green and the “reverse” model because my AXSR folds left. Purchased from Mile High last week so I obviously don’t have a lot of time with it. It will be mostly pics since there are so few on their site.



My pre-sales impressions are that AIM is a little ghey. Their product page sucks and they still haven’t answered any of my emailed questions almost a month ago. Fortunately Mile High is awesome. They even pulled a bag and an AXSR off the shelf in 300nm with a Tbac SR brake to verify it would actually fit in the bag which it does but barely. Thanks a ton!

This was a concern because my tape measure says the rifle OAL folded is one inch longer than the bag’s Interior length according to AIM website.

TLDR so far, AIM comms suck, mile high awesome, gun fits in bag.

I really wanted a short, wide bag because it fits the Jeep and side by side much better than long and skinny. And I like the way the AI stocks protect the bolt. I hate having to pull the bolt out of the rifle to put it in pelican cases. This bag does that very well.


It also has 8 straps around the outside with buckles to secure everything inside. And 4 more on the inside plus the pocket.


First impressions are that the padding is generous and where it needs to be. The rifle sits inside several layers of straps, padding, and the outer canvas, and more straps. Plus an extra sheath of heavy canvas over the muzzle.


There’s quite a bit of space inside the bag. I currently have the Tbac 338Ultra SR in the large pouch on the side along with a TAB gear sling, but I think I can strap it inside the bag either over the barrel or under the hand guard for a better fit and use of space.


I was also worried about the bag being tall enough to add a WMLRF. Since I don’t have one on this rifle yet I improvised with a 2x4 block which zipped easily inside over the area419 diving board.


I immediately got anti seize all over the inside padding. I’ll have to figure out how to keep that from attracting dirt.
There’s ample room for a gen 1 Ckyepod too.


On the bottom spine of the bag is a pocket for a cleaning rod. The unavoidable downside of the short fat bag though is that none of my cleaning rods are this short and indeed, i doubt a cleaning rod exists that is long enough to push a patch out the end of a 27” factory AI 300nm barrel (plus brake) AND fit in a 33” pouch. And that assumes removal of barrel from action for cleaning. It is nevertheless well constructed and may work great for the 20” BBL crowd. But, I’d rather the pouch be a wee bit more generous and allow an actual barrel instead of a cleaning rod. There’s plenty of room in the external pouches for the bolt and mags for a caliber change. But the cleaning rod pouch is pretty tight. I’m mildly concerned a rod may be warped over time in it, but it’s prob not a feature I’ll use so for me it’s just another layer of padding between the rifle and the floor.


Straps and all seem exceptionally well stitched together. IMHO the construction is at least as good as my eberlestock bags, probably better. And I like that I can add or move internal straps as the bottom one doesn’t quite line up where I want for the AXSR.


The back has an extra layer of hard material to protect the hinge which is the part farthest to the rear on the rifle. If nothing else it helps the bag keep its shape in the back.


The pouches on the outside are generous. The smaller one easily holds a couple of 300nm ammo binder/books in the interior sleeves. The 300nm magazines fit in them as well. I don’t plan to keep ammo there of course, just showing the fit for reference.


The back has a sleeve for shoulder straps (included) which allow it to be carried like a backpack. I don’t really have any intention of using them so I’ll prob remove them for weight savings.

Both sides are covered with little tabs. Not sure what they’re for but I’m speculating you could run a bike cable through them and secure the contents of the bag and both pouches pretty well. They’re on all four corners of both pockets.


The handle is pretty comfortable. It carries easily but balance is a bit butt heavy for me. judging by the bear pit I guess that may be the prevailing preference these days.


Overall I’m quite impressed with the quality and the well thought out design. It may be slightly irritating for casual range use because it takes a bit of time buckling and unbuckling everything. The alternative of just leaving the buckles flapping is suboptimal. But for bouncing around offroad it seems like a great alternative to a hard case. the rifle seems quite well protected. Probably needs a rain cover though.

Honestly my criticisms are extremely minor. (Needs a barrel and suppressor sleeve, and rain cover)

Net: 2 thumbs up. I’d recommend without reservation. Anyone else have one with some miles on it? How’s it holding up?



That solves a lot of my gear transport issues for the AXSR. But I also doubt I’ll actually use the two pouches for anything. Everything that I can think of putting in there is stuff I’d move to the pack when I get on foot anyways, like tools etc. but Possibly a spare bipod or scope? Caliber change mags and bolt would be nice. But there’s nowhere to store the barrel.

Anyways, I think I’ll have to reconfigure my lo-drag. Maybe switch to the hi-speed instead without the scabbard since the AXSR doesn’t come close to fitting folded or otherwise. Then put the ammo carrier on it and get a jelly roll for the thermal. For transport, That really just leaves the belt and mag holders with no home. Guess I need a duffle bag too.

Painted Grayboe Ridgeback skim bedded for Bergara. S/a
fits proof sendero profile
$300 for stock alone
$400 with bottom Grayboe bottom metal
PayPal f/f

228 pieces of 1x fired Dasher brass that is prepped. Measured the OD at .265" and the ID at .240", so .003" of tension.

Before the first firing, I turned the necks to remove high spots. A bit anal, but I enjoy the process.

$200 shipped

New in box Vortex Impact 4000. Have a second that I use, but don't need two.

$1450 Shipped

Vortex Razor GenII 1-6 JM-1 Reticle. Perfect glass and operation with box/papers. A little range rash on battery cap. $800 shipped conus.

Size maybe 500 pieces of brass. Work great. No longer have a 6mm Dasher.

$220 Shipped

11 twist take off barrel from a relatively rare Tikka T3X Tactical.

It shot excellent but I pulled it and put a short carbon barrel on the gun so I don't need it any longer.

Has slight rub for clamping the barrel in a barrel vice when removing. They are stubborn to get off. It might even be aluminum from the barrel vice inserts. Not sure.

$90 Shipped.

MAVEN RS1.2 2.5-15x44 FFP SHR-MIL RETICLE. AADMOUNT scope caps. Brand new never mounted, going in a different direction. 1100$ shipped to your door.

Gray ops precision scope rings 30mm low. Used one fall, slight scuff on one of them. They worked great. 125$ shipped to your door.

1200$ for scope and rings.

Really Right Stuff (RRS) Ascend Tripod-14
Comes with both center columns

• Ascend Ball Head Center Column (Ascend-14-BHQC)
  • Integrated ball head that nests into the apex
• Ascend Platform Center Column (Ascend-14-PFQC)
  • Integrated 3/8"-16 mounting platform

Excellent Condition
$1,200 includes UPS shipping insured, PP or check (ships when clears)
PM for more pictures or info, thanks for looking

I have been playing around with JPs rilfe builder and I am planning on ordering a SCI-20 in .223.

The two biggest things I cant make my mind up on is barrel length and stock.

I'm stuck between 16/18/20inch

Its either the UBR or ?????????

More than likely wont get shot much past 6-700. Really want just a fun range gun and something to try PRS gas gun with.

22" Dracos Straight Jacket Barrel. 8T Rifling. Shot really well suppressed and unsuppressed.

Includes gas tube and gas block. Between 100 and 150 rounds through it. Used it coyote hunting.

$375 Shipped

$105 Shipped. Not BNIB, but look like it.

Looking for a core 300blk barrel. Thanks

First Lite corrugate Foundry Pants in Terra 32x32. Hardly worn $110 **SOLD**

Brand new never fired Gen 2 PST with the MRAD EBR 7C reticle. Comes with everything shipped.

$600 shipped